Remedy Machine Sales, LLC

Email Remedy Machine Sales, LLC East Coast EDM Machinery Find A Dealer Near You


- Remedy CNC Bed Mill -
Models: A1-3T (3 HP)  and the  A1-5T (5 HP)

 

A13TA15T


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

CNC Control Fagor 8060 -Fagor Solid State Design Control. This is a Conversational control 4.0 and it is very Powerful. The conversational system makes and runs Fanuc compatible G-Codes, with multiple USB ports and network capability. Color 2D and 3D graphics, a machining time estimator, and DXF file import and machine feature and so much more.
Use this Control Data link to see all of the detailed information on the Fagor 8060 Control.

Remedy A1-3T and A1-5T CNC Bed Mill Features

*
Fagor 8060 control with Color LCD
*
Manual Quill and 20” Full CNC Z axis operation
*
Fagor Axis Motors and drives, Delta Spindle inverter
*
3 HP Spindle Motor, CAT30-NMTB30 or R8 Spindle Taper
*
70-4,200 rpm Programmable spindle with HI-LO gear
*
Hardened & Ground with Turcite-B coating on all machine ways
*
Precision Double nut ball screws, hardened and ground for
longer life, higher accuracy and better repeatability
*
FC30 Meehanite Casting Base, Column and Head; annealed
and stress relieved for long term stability and reliability
*
100% Laser tested providing positioning accuracy & repeatability
*
Dovetail way design on all axes to provide maximum
rigidity and stability
*
Table chip pan with 2 Lexan doors (Optional)
*
Standard rubber way covers on all three axes
*
Programmable Coolant System
*
Automatic lubrication system with Low Lube alarm
*
Built in Quartz Work Lamp
*
MPG Manual Hand box with axis and speed controls (opt.)

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Feed Rate:
Rapid feed rate................ X/Y: 220 ipm   Z: 220 ipm
Cutting feed rate 1-150 ipm
Head swivel (Right/ Left).. 90 degrees
Feed motors on XYZ........ Delta AC Motors & Drives
Motor Size..................... XY=.75kW
Z=1kW
Motor:
Spindle motor HP Rating.. A1-3T = 3 HP
A1-5T = 5 HP
Coolant pump 0.3 HP
Lubrication pump............. 150 W
Power requirement 6/8 KVA,
3 Phase 208-230 voltage
General:
Area requirement 99 x 102 x 98H
Weight........................... 4,400 lbs.

Machine Specifications: 
Table size........................................ 9” x 49”
Table has (3)  “T” Slots
Longitudinal travel (X axis) 28”
Cross travel (Y axis)......................... 15.74”
Vertical travel (Z-axis) 19.68”
Quill Travel (Hardened and Chromed)........ 5”
Quill Diameter 3T = 3.38”
5T = 3.94"
Spindle nose to table top (D) 3.93”~23.6”
Spindle center to column front surface 16.5”
Load capacity 660 lb.
Spindle taper.................................. BT30 or CAT30
Spindle Speed (RPM) 80 to 4200 RPM
Transmission of spindle & motor........ Belt
Spindle Inverter brand. Delta
Automatic tool changer- N/A Power Draw Bar
(Recommended optional item)



Standard Accessories
Fagor 8060 Large Color LCD Shop floor conversational Programming
Operation manual set Auto lube system Manual/Programmable Coolant system
Schematic Set Halogen work light (2) USB 2.0 ports
Toolbox Leveling Bolts & Pads Solid state hard drive
1 Mb Part Program Size Compression Tapping Cutter Compensation
4th Axis Software    


Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
Dealer Map


Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Check out all of the Tooling Package choices we offer for your New Remedy Machine.

  Mill Tooling Packages  


- Remedy CNC Bed Mill -
A2-5T (5 HP) and the A2-5H (8000 rpm)

 

A25T
Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.



Remedy A2-5T (5 HP) and the A2-5H (8000 rpm)
CNC Bed Mill Features

*
Centroid M400W control with 15” LCD and Industrial PC
*
Manual Quill and 20” Full CNC Z axis operation
*
Delta Axis Motors and drives, Delta Spindle inverter
*
5 HP Spindle Motor, CAT30-NMTB30 or R8 Spindle Taper
*
70-4,200 rpm Programmable spindle with HI-LO gear
50-8000 RPM without back gear and fixed quill A2-5H
*
Hardened & Ground with Turcite-B coating on all machine ways
*
Precision Double nut ball screws, hardened and ground for longer life,
higher accuracy and better repeatability
*
FC30 Meehanite Casting Base, Column and Head; annealed and
stress relieved for long term stability and reliability
*
100% Laser tested providing positioning accuracy & repeatability
*
Dovetail way design on all axes to provide maximum rigidity and stability
*
Table chip pan with 2 Lexan doors (Optional)
*
Standard rubber way covers on all three axes
*
Programmable Coolant System
*
Automatic lubrication system with Low Lube alarm
*
Built in Quartz Work Lamp
*
MPG Manual Hand box with axis and speed controls (opt.)

Feed Rate:
Rapid feed rate........................ X/Y: 240 ipm   Z: 220 ipm
Cutting feed rate 1-150 ipm
Feed motors on XYZ................. Delta AC Motors & Drives
Axis Motor Size XY=1.0 kW
Z=1.0 kW
Motors:
Spindle motor HP Rating..........

A1-3T=3 HP
A1-5T=5 HP

Coolant pump 0.3 HP
Lubrication pump...................... 150 W
Power requirement 6/8 KVA, 3 Ph. 208-230 VAC
General  
Area requirement 115 x 102 x 98H
Weight 4,600 lbs.

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Machine Specifications: 
Table size............................................ 10” x 54” Table has (3) "T" slots
Longitudinal travel (X axis) 33.8”
Cross travel (Y axis)............................ 19.6”
Vertical travel (Z-axis) 25.1”
Quill Travel (Hardened and Chromed)............ 5”
Quill Diameter 3T = 3.38”
5H = 3.94”
Spindle nose to table top (D) 3.93”~27.5”
Spindle center to column front surface.... 16.5”  
Load capacity 660 lb.
Spindle taper....................................... BT40 or CAT40
Spindle Speed (RPM) 5T=80-4000
5H =80-8000 rpm
Transmission of Power motor to spindle Belt
Automatic tool changer- N/A Power Draw Bar
(Recommended optional item)
Head swivel (Right/ Left)....................... 90 degrees

Standard Accessories
M400W Industrial PC Large 15” Color LCD Shop floor conversational Programming
Operation manual set Auto lube system Manual/Programmable Coolant system
Schematic Set Halogen work light (3) USB 2.0 ports & RS-232 Interface
Toolbox Leveling Bolts & Pads 6 GB solid state hard drive
1 Mb Part Program Size Compression Tapping Cutter Compensation
4th Axis Software  


Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
Dealer Map


Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Check out all of the Tooling Package choices we offer for your New Remedy Machine.

  Mill Tooling Packages  


- Remedy CNC Bed Mill -
A3-10H (10 HP/8000 rpm)


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

CNC Control Centroid M400W -A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.
Machine Specifications: 
Table Size: (Hardened and Ground) 13” x 60” Table has (3) “T” Slots
Longitudinal travel (X axis) 39.9”
Cross travel (Y axis)............................. 19.9”
Vertical travel (Z-axis) 19.6”
 
Spindle nose to table top (D) 4.3”~23.5”
Spindle center to column front surface.... 16.5”
Load capacity 1100 lb.
Spindle taper........................................ BT40 or CAT40
Spindle Speed (RPM) 50-8000
Transmission of Power motor to spindle.. Belt
Spindle Inverter brand Delta
 
Automatic Tool Changer - NA Easy tool release
Standard Push button tool Release  
Head swivel (Right/ Left) Fixed
Feed Rate:
Rapid feed rate................................. X/Y: 240 ipm Z: 220 ipm
Cutting feed rate 1-200 ipm
Feed motors on XYZ.........................

Delta AC Motors & Drives

Axis Motor Size

XY=1.0 kW
Z=1.0 kW

Motors:
Spindle motor HP Rating................... 10 HP
Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 15 KVA, 3 Ph. 208-230 VAC
General:
Area requirement.............................. 135 x 110 x 102H
Weight 5,200 lbs
Air Required.................................... Yes


 

Remedy CNC Bed Mill A3-10H
(10 HP/8000 rpm) Features

*
Centroid M400W control with 15” LCD and Industrial PC
*
Rigid Head with 19.9” Full CNC Z axis operation
*
Delta Axis Motors and drives, Delta Spindle inverter
*
10 HP Spindle Motor, CAT40-NMTB40 Spindle Taper
*
50-8,000 rpm Programmable spindle
*
Hardened & Ground with Turcite-B coating on all machine ways
*
Precision Double nut ball screws, hardened and ground for longer life,
higher accuracy and better repeatability
*
FC30 Meehanite Casting Base, Column and Head; annealed and stress
relieved for long term stability and reliability
*
100% Laser tested providing positioning accuracy & repeatability
*
Box way design on the Y  & Z axes to provide maximum rigidity
and stability
*
Optional TCG or FE with metal telescoping way covers
*
Programmable Coolant System
*
Automatic lubrication system with Low Lube alarm
*
Built in Quartz Work Lamp
*
MPG Manual Hand box with axis and speed controls (opt.)


 

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Standard Accessories
M400W Industrial PC Large 15” Color LCD Shop floor conversational Programming
Operation manual set Auto lube system Manual/Programmable Coolant system
Schematic Set Halogen work light (3) USB 2.0 ports & RS-232 Interface
Toolbox Leveling Bolts & Pads 6 GB solid state hard drive
1 Mb Part Program Size Compression Tapping Cutter Compensation
4th Axis Software  


Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
Dealer Map


Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Check out all of the Tooling Package choices we offer for your New Remedy Machine.

  Mill Tooling Packages  


- Remedy CNC Bed Mill -
Model: E8EC (10 HP/6000 rpm)

 

E8EC
Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

 

 

Remedy CNC Bed Mill Model E3EC
(10 HP/6000 rpm)
Features

*
Centroid M400W control with 15” LCD and Industrial PC
*
Rigid Head with 19.9” Full CNC Z axis operation
*
Delta Axis Motors and drives, Delta Spindle inverter
*
10 HP Spindle Motor, CAT40-NMTB40 Spindle Taper
*
70-6,000 rpm Programmable spindle
*
Hardened & Ground with Turcite-B coating on all machine ways
*
Precision Double nut ball screws, hardened and ground for longer
life, higher accuracy and better repeatability
*
FC30 Meehanite Casting Base, Column and Head; annealed
and stress relieved for long term stability and reliability
*
100% Laser tested providing positioning accuracy & repeatability
*
Box way design on the Y  & Z axes to provide maximum rigidity
and stability
*
Optional TCG or FE with metal telescoping way covers
*
Programmable Coolant System
*
Automatic lubrication system with Low Lube alarm
*
Built in Quartz Work Lamp
*
MPG Manual Hand box with axis and speed controls (opt.)

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

Feed Rate:
Rapid feed rate................................. X/Y: 200 ipm   Z: 200 ipm
Cutting feed rate 1-150 ipm
Feed motors on XYZ......................... Delta AC Motors & Drives
Axis Motor Size XY=1.0 kW Z=1.0 kW
Motors:
Spindle motor HP Rating 10 HP
Coolant pump.................................. 0.3 HP
Lubrication pump 150 W
Power requirement........................... 17 KVA,
3 Phase 208-230 voltage
General:
Area requirement 135 x 110 x 102H
Weight............................................ 8,300 lbs.
Air Required Yes

Machine Specifications: 
Table size (Hardened and Ground) ............... 18” x 56.7” Table has (3) "T" slots
Longitudinal travel (X axis) 50”
Cross travel (Y axis)............................ 22”
Vertical travel (Z-axis) 24”
Spindle nose to table top (D).................. 4.9”~29”
Spindle center to column front surface 23.6”
Load capacity....................................... 2100 lb.
Spindle taper........................................ NMTB40 or CAT40
Spindle Speed (RPM)............................ 70 - 6000 rpm
Transmission of spindle & motor Belt
Spindle Inverter brand Delta
Automatic Tool Changer - Optional 16 Station Umbrella
Standard Push button tool Release Non-ATC Easy tool release
Head swivel (Right/ Left) Fixed

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Standard Accessories
M400W Industrial PC Large 15” Color LCD Shop floor conversational Programming
Operation manual set Auto lube system Manual/Programmable Coolant system
Schematic Set Halogen work light (3) USB 2.0 ports & RS-232 Interface
Toolbox Leveling Bolts & Pads 6 GB solid state hard drive
1 Mb Part Program Size Compression Tapping Cutter Compensation
4th Axis Software  


Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
Dealer Map


Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Check out all of the Tooling Package choices we offer for your New Remedy Machine.

  Mill Tooling Packages  


- Remedy CNC Bed Mill -
Model: BM-430H

BM430H

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

 

Remedy CNC Bed Mill Model BM-430H Features

*
Centroid M400W control with 15” LCD and Industrial PC
*
Rigid Head with 19.9” Full CNC Z axis operation
*
AC Delta Axis Motors and drives, Delta Spindle inverter
*
7.5 HP Spindle Motor, CAT40-NMTB40 Spindle Taper
*
50-8,000 rpm Programmable spindle
*
Hardened & Ground with Turcite-B coating on all machine ways
*
Precision Double nut ball screws, hardened and ground for longer life,
higher accuracy and better repeatability
*
FC30 Meehanite Casting Base, Column and Head; annealed and stress
relieved for long term stability and reliability
*
100% Laser tested providing positioning accuracy & repeatability
*
Box way design on the Y  & Z axes to provide maximum rigidity
and stability
*
Optional TCG or FE with metal telescoping way covers
*
Programmable Coolant System
*
Automatic lubrication system with Low Lube alarm
*
Built in Quartz Work Lamp
*
MPG Manual Hand box with axis and speed controls (opt.)

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.
Feed Rate:
Rapid feed rate: Delta AC System...... X/Y: 250ipm   Z: 240 ipm
Cutting feed rate 1-200 ipm
Feed motors on XYZ......................... Delta AC Motors & Drives
Axis Motor Size XY=1.0 kW
Z=1.0 kW
Motor:
Spindle motor HP Rating.................. 7.5 HP
Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 15 KVA,
3 Phase 208-230 voltage
General:
Area requirement............................. 110 x 95 x 102H
Weight 5,500 lbs.
Air Required..................................... Yes

 

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems


Machine Specifications: 
Table size............................................. 13.7” x 50” Table has (3) "T" slots
Longitudinal travel (X axis) 31.5”
Cross travel (Y axis)............................. 15.7”
Vertical travel (Z-axis) 17.7”
Spindle nose to table top (D).................. 4.7”-22.4”
Spindle center to column front surface 17.7”
Load capacity....................................... 800 lb.
Spindle taper BT40 or CAT40
Spindle Speed (RPM)........................... 50-8000 RPM
Transmission of spindle & motor Belt
Spindle Inverter brand............................ Delta
   
Automatic Tool Changer..................... 16 Station Umbrella
Standard Push button tool Release Non-ATC Easy tool release
Head swivel (Right/ Left)........................ Fixed


Servo

RT-150 4th Axis  3 Jaw Chuck not shown

HDP4

DP-4 Touch Probe
Standard Accessories
M400W Industrial PC Large 15” Color LCD Shop floor conversational Programming
Operation manual set Auto lube system Manual/Programmable Coolant system
Schematic Set Halogen work light (3) USB 2.0 ports & RS-232 Interface
Toolbox Leveling Bolts & Pads 6 GB solid state hard drive
1 Mb Part Program Size Compression Tapping Cutter Compensation
4th Axis Software  

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
Dealer Map


Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Check out all of the Tooling Package choices we offer for your New Remedy Machine.

  Mill Tooling Packages  


- Remedy CNC Bed Mill Model: BM-460 H & T

 

 

BM460HT
Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.


Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

 

 

Remedy CNC Bed Mill Model BM-460 H & T Features

*
Centroid M400W control with 15” LCD w/Industrial PC
*
H= Rigid head and 8,000 RPM spindle
*
T= Swivel Head and 4.5” Quill and 4200 RPM Spindle
*
AC Delta Axis Motors and drives, Delta Spindle inverter
*
10 HP Spindle Motor, CAT40-NMTB40 Spindle Taper
*
Programmable spindle speeds
*
Hardened & Ground Table with Turcite-B coating on all machine ways
*
Precision Double nut ball screws, hardened and ground for longer life,
higher accuracy and better repeatability
*
FC30 Meehanite Casting Base, Column and Head; annealed and stress
relieved for long term stability and reliability
*
100% Laser tested providing positioning accuracy & repeatability
*
Box way design on the Y  & Z axes to provide maximum rigidity and stability
*
Optional TCG or FE with metal telescoping way covers
*
Programmable Coolant system
*
Automatic lubrication system with Low Lube alarm
*
Built in Quartz Work Lamp
*
MPG Manual Hand box with axis and speed controls (opt.)

Feed Rate:
Rapid feed rate: Delta AC System...... X/Y: 240ipm   Z: 220 ipm
Cutting feed rate 1-220 ipm
Feed motors on XYZ......................... Delta AC Motors & Drives
Axis Motor Size XY=1.0 kW
Z=1.0 kW
Motors:
Spindle motor HP Rating................. T =7.5 HP
 H= 10HP
Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 15 KVA,
3 Phase 208-230 voltage
General:
Area requirement.............................. 110 x 95 x 102H
Weight 6,800 lbs.
Air Required Yes

 

 


Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Machine Specifications: 
Table size............................................. 15.7” x 54” Table has (3) "T" slots
Longitudinal travel (X axis) 40”
Cross travel (Y axis)............................. 20”
Vertical travel (Z-axis) 22”
Spindle nose to table top (D).................. 4”~26”
Spindle center to column front surface 17.7”
Load capacity....................................... 1550 lb.
Spindle taper BT40 or CAT40
Spindle Speed (RPM)........................... See Above
Transmission of spindle & motor Belt
Spindle Inverter brand Delta
   
Automatic Tool Changer T=Not available
H=16 Station Umbrella
Standard Push button tool Release T model None
ATC - Easy tool release
Head swivel (Right/ Left) T=Swivel
H=Fixed



Servo

RT-150 4th Axis  
3 Jaw Chuck not shown

HDP4

DP-4 Touch Probe
Standard Accessories
M400W Industrial PC Large 15” Color LCD Shop floor conversational Programming
Operation manual set Auto lube system Manual/Programmable Coolant system
Schematic Set Halogen work light (3) USB 2.0 ports & RS-232 Interface
Toolbox Leveling Bolts & Pads 6 GB solid state hard drive
1 Mb Part Program Size Compression Tapping Cutter Compensation
4th Axis Software  

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
Dealer Map


Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Check out all of the Tooling Package choices we offer for your New Remedy Machine.

  Mill Tooling Packages  


- Remedy CNC Machining Center Model: BM-560 H & T

BM560T


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP



BM560H

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.
Feed Rate:
Rapid feed rate.............................. X/Y: 250 ipm Z: 220 ipm
Cutting feed rate 1-220 ipm
Feed motors on XYZ....................... Delta AC Motors & Drives
Axis Motor Size XYZ = 2.0 kW
Motors:
Spindle motor HP Rating:................ T=10 HP
H-10 HP
Coolant pump 0.3 HP
Lubrication pump............................ 150 W
Power requirement 15 KVA,
3 Phase 208-230 voltage
Machine:
Width x Depth x Height (WxDxH).... 165” x 85 x 105”
(86 Column Height)
Net Weight 8,400 lbs. (3800 Kg)
Spindle Tooling Packages............... 40 Taper Collet or
Standard inch size holders
 
Area requirement........................... 165 x 90 x 105H
Weight 8,400 lbs
Air Required Yes
General:  
Automatic Tool Changer T=Not available
H=16 Station Umbrella
Standard Push button tool Release T model None
ATC - Easy tool release
Head swivel (Right/ Left) T=Yes
H= Fixed


Servo

RT-150 4th Axis  
3 Jaw Chuck not shown

HDP4

DP-4 Touch Probe

Remedy CNC Bed Mill Model BM-560 H & T Features

*
Centroid M400W control with 15” LCD w/Industrial PC
*
H= Rigid head and 8,000 RPM (Optional ATC)
*
T= Swivel Head and 4.5” Quill and 4500 RPM Spindle (No ATC)
*
AC Delta Axis Motors and drives, Delta Spindle inverter
*
10 HP Spindle Motor, CAT40-NMTB40 Spindle Taper
*
Programmable spindle speeds
*
Hardened & Ground Table with Turcite-B coating on all machine ways
*
Precision Double nut ball screws, hardened and ground for longer life,
higher accuracy and better repeatability
*
FC30 Meehanite Casting Base, Column and Head; annealed and stress
relieved for long term stability and reliability
*
100% Laser tested providing positioning accuracy & repeatability
*
Box way design on the Y  & Z axes to provide maximum rigidity
and stability
*
Optional TCG or FE with metal telescoping way covers
*
Programmable Coolant system
*
Automatic lubrication system with Low Lube alarm
*
Built in Quartz Work Lamp
*
MPG Manual Hand box with axis and speed controls (opt.)


Machine Specifications: 
Table size............................................. 16.5” x 63" Table has (4) "T" slots
Longitudinal travel (X axis) 51”
Cross travel (Y axis)............................. 24.5”
Vertical travel (Z-axis) 24”
 
Spindle nose to table top (D).................. 5”-30”
Spindle center to column front surface 25.5”
Load capacity....................................... 2000 lb
Spindle taper BT40 or CAT40
Spindle Speed (RPM)........................... See Above
Transmission of spindle & motor Belt
Spindle Inverter brand Delta


Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems


Full Enclosure and Auto Tool Changer

Standard Accessories
M400W Industrial PC Large 15” Color LCD Shop floor conversational Programming
Operation manual set Auto lube system Manual/Programmable Coolant system
Schematic Set Halogen work light (3) USB 2.0 ports & RS-232 Interface
Toolbox Leveling Bolts & Pads 6 GB solid state hard drive
1 Mb Part Program Size Compression Tapping Cutter Compensation
4th Axis Software  

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
Dealer Map


Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Check out all of the Tooling Package choices we offer for your New Remedy Machine.

  Mill Tooling Packages  

Email Remedy Machine Sales, LLC Bruce Tollefson Tom Khoury Roger Gold & Chris Perseo Bavid Belding