Remedy Machine Sales, LLC

Email Remedy Machine Sales, LLC East Coast EDM Machinery Find A Dealer Near You


- Remedy 3VK 2+1 CNC Knee Mill with Manual Z axis -

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

 

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

Retrofit Z Axis Quill Kit


Remedy 3VK 2+1with Manual Z Axis Features

*
•Centroid M400W w/15” LCD 2/3 Axis CNC control w/Industrial PC PC is mounted on a swing arm for convenient positioning
*
Manual quill w/Z Axis DRO feedback to the CNC Control
*
Z Axis moves are prompted by the CNC Control to the operator
*
3 HP Spindle Motor, 30 Spindle Taper (Optional R8 Taper)
*
Programmable 5,000 RPM spindle with HI-LO gears
*
Tilt - Swivel head and a Movable Ram
*
Hardened & Ground Table w/ Turcite-B coating on the X & Y axis ways
*
Precision 1 1/8” Ground ball screws for longer life and high accuracy
*
FC30 Meehanite Casting main frame, annealed, stabilized and stress relieved for long term reliability
*
Anti-rust Chrome Plated Quill ( 30 taper or R8 options )
*
Box ways design on Y axis to provide maximum rigidity and stability
*
Standard, rubber way covers on the Y axis ( front and rear )
*
Precision APEC class7 spindle bearing to ensure a longer life spindle and run out less than 0.00012
*
16” Knee Travel (optional power assist for the knee )
*
Automatic lubrication system with Low Lube alarm
*
X & Y Axis Jog buttons - - - MPG pulse handwheel (Optional)
*
Toolbox, schematic set and Manual set
*
Upgradable to a 3 axis CNC System in the future

Feed Rate:

Feed motors on XYZ..................... Delta AC .75 kW
Closed Loop
Rapid feed rate :(Delta AC System) X/Y: 150 ipm
Z: Manual
Cutting feed rate........................... 1-140 ipm
Motors:
Spindle motor/max torque.............. 3 HP (Opt. 5 HP)
Coolant pump 0.3 HP
Lubrication pump.......................... 150 W
Power requirement 4 KVA, 3 Phase 208-230
Tool Changer: …………………….... Power Draw Bar (Opt)
Area Requirement (WxDxH): 105” x 100 x 97
Net Weight................................... 3,100 lbs.
Additional information:
Power requirement....................... 4 KVA 3 Ph. 208/230 VAC ( 220 V Single Phase Optional)
Air requirements 90 - 100 psi
Type of oil for Way oil /
oil chiller / pneumatic oil
Mobil Vactra #2/
Shell Tellus 32/ Air tool oil
Coolant capacity................... 5 Gallons
Machine Specifications:
Table size.............................................. 10” x 54”
Longitudinal travel (X axis) 31”
Cross travel (Y axis).............................. 14.5”
Vertical travel ( Z axis) 4.78”
Knee Travel ........................................... 16.0”
Head Tilt/swivel Swivel Rt/Lft
Tilt Front/back
90 degree
45 degree
Spindle nose to table top (D)................... 0.8”-19.0”
Spindle C/L to Column (Movable) 6.875 – 23.50”
Load capacity........................................ 600 lbs.
Spindle taper CAT-30 or R8
Spindle speeds ...(B/G and H/G)............. 70-650 500-5000 RPM
23.6” (600 mm)
Transmission of spindle & motor Belt
Spindle Tooling Packages 30 Taper, collet or Standard inch size holders

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Power Knee





Head Side View
Standard Accessories
M400W Industrial PC 4th Axis Software Shop floor conversational Programming
Operation manual set Large 15” Color LCD Manual/Programmable Coolant system
Schematic Set Auto lube system (3) USB 2.0 ports & RS-232 Interface
6 GB solid state hard drive Halogen work light Compression Tapping
Cutter Compensation Table Chip guard (opt.) 1 Mb Part Program Size
Toolbox Subs & Macros Software  


Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
  Dealer Map
Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations. Request one today!
     
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages  


- Remedy 3VK Rigid Head CNC Knee Mill -


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP


Remedy 3VK Rigid Head CNC Knee Mill Features

*
Centroid M400W w/15” LCD 2/3 Axis CNC control w/Industrial PC PC is mounted on a swing arm for convenient positioning
*
Full CNC Z Axis CNC Control and machine
*
3 HP Spindle Motor, 30 Spindle Taper (Optional R8 Taper)
*
Optional 5 HP Head with 40 Taper spindle
*
Programmable 50-5,000 rpm spindle with HI-LO gears
*
Tilt - Swivel head and a Movable Ram
*
Hardened & Ground Table w/ Turcite-B coating on the X & Y axis ways
*
Precision 1 1/8” Ground ball screws for longer life and high accuracy
*
Limit switches on all axes
*
FC30 Meehanite Casting main frame, annealed, stabilized and stress relieved for long term reliability
*
Anti-rust Chrome Plated Quill ( 30/40 taper or R8 options )
*
Box ways design on Y axis to provide maximum rigidity and stability
*
Standard, rubber way covers on the Y axis ( front and rear )
*
Precision APEC class7 spindle bearing to ensure a longer life spindle and run out less than 0.00012
*
16” Knee Travel (optional power assist for the knee )
*
Automatic lubrication system with Low Lube alarm
*
X & Y Axis Jog buttons - - - MPG pulse handwheel (Optional)
*
Toolbox, schematic set and Manual set
Fixed and Movable Ram Models
CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

Feed Rate:

Feed motors on XYZ..................... Delta AC .75 kW
Closed Loop
Rapid feed rate :(Delta AC System) X/Y: 150 ipm
Z: Manual
Cutting feed rate........................... 1-140 ipm
Motors:
Spindle motor/max torque.............. 3 HP (Opt. 5 HP)
Coolant pump 0.3 HP
Lubrication pump.......................... 150 W
Power requirement 4 KVA, 3 Phase 208-230
Tool Changer: …………………….... Power Draw Bar (Opt)
Area Requirement (WxDxH): 105” x 100 x 97
Net Weight................................... 3,100 lbs.
Additional information:
Power requirement....................... 4 KVA 3 Ph. 208/230 VAC
( 220 V Single Phase Optional)
Air requirements 90 - 100 psi
Type of oil for Way oil /
oil chiller / pneumatic oil
Mobil Vactra #2/
Shell Tellus 32/ Air tool oil
Coolant capacity......................... 5 Gallons

Machine Specifications:
Table size.............................................. 10” x 54”
Longitudinal travel (X axis) 31”
Cross travel (Y axis).............................. 14.5”
Vertical travel ( Z axis) 4.95”
Knee Travel ........................................... 16.0”
Head Tilt/swivel Swivel Rt/Lft
Tilt Front/back
90 degree
45 degree
Spindle nose to table top (D)................... 0.8”-17.0”
Spindle C/L to Column (Movable) 6.875 – 23.50”
Load capacity........................................ 600 lbs.
Spindle taper CAT-30 or R8
Spindle speeds ...(B/G and H/G)............. 70-650 500-5000 RPM
23.6” (600 mm)
Transmission of spindle & motor Belt
Spindle Tooling Packages 30 Taper, collet or
Standard inch size holders

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Standard Accessories
M400W Industrial PC 4th Axis Software Shop floor conversational Programming
Operation manual set Large 15” Color LCD Manual/Programmable Coolant system
Schematic Set Auto lube system (3) USB 2.0 ports & RS-232 Interface
6 GB solid state hard drive Halogen work light Compression Tapping
Cutter Compensation Table Chip guard (opt.) 1 Mb Part Program Size
Toolbox Subs & Macros Software  


Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
  Dealer Map
Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations. Request one today!
     
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages  


- Remedy 3VK Rigid Head CNC Knee Mill -

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Remedy 3VK Rigid Head CNC Knee Mill Features

 
*
Centroid M400W w/15” LCD 2/3 Axis CNC control w/Industrial PC PC is mounted on a swing arm for convenient positioning
*
Full CNC Z Axis CNC Control and machine
*
3 HP Spindle Motor, 30 Spindle Taper (Optional R8 Taper)
*
Optional 5 HP Head with 40 Taper spindle
*
Programmable 50-5,000 rpm spindle with HI-LO gears
*
Tilt - Swivel head and a Movable Ram
*
Hardened & Ground Table w/ Turcite-B coating on the X & Y axis ways
*
Precision 1 1/8” Ground ball screws for longer life and high accuracy
*
Limit switches on all axes
*
FC30 Meehanite Casting main frame, annealed, stabilized and stress relieved for long term reliability
*
Anti-rust Chrome Plated Quill ( 30/40 taper or R8 options )
*
Box ways design on Y axis to provide maximum rigidity and stability
*
Standard, rubber way covers on the Y axis ( front and rear )
*
Precision APEC class7 spindle bearing to ensure a longer life spindle and run out less than 0.00012
*
16” Knee Travel (optional power assist for the knee )
*
Automatic lubrication system with Low Lube alarm
*
X & Y Axis Jog buttons - - - MPG pulse handwheel (Optional)
*
Toolbox, schematic set and Manual set
Fixed and Movable Ram Models

Feed Rate:

Feed motors on XYZ..................... Delta AC .75 kW
Closed Loop
Rapid feed rate :(Delta AC System) X/Y: 150 ipm
Z: Manual
Cutting feed rate........................... 1-140 ipm
Motors:
Spindle motor/max torque.............. 3 HP (Opt. 5 HP)
Coolant pump 0.3 HP
Lubrication pump.......................... 150 W
Power requirement 4 KVA, 3 Phase 208-230
Tool Changer: …………………….... Power Draw Bar (Opt)
Area Requirement (WxDxH): 105” x 100 x 97
Net Weight................................... 3,100 lbs.
Additional information:
Power requirement....................... 4 KVA 3 Ph. 208/230 VAC
( 220 V Single Phase Optional)
Air requirements 90 - 100 psi (w/Power Draw Bar)
Type of oil for Way oil /
oil chiller / pneumatic oil
Mobil Vactra #2/
Shell Tellus 32/ Air tool oil
Coolant capacity................... 5 Gallons

Machine Specifications:
Table size.............................................. 10” x 54”
Longitudinal travel (X axis) 31”
Cross travel (Y axis).............................. 14.5”
Vertical travel ( Z axis) 4.95”
Knee Travel ........................................... 16.0”
Head Tilt/swivel Swivel Rt/Lft
Tilt Front/back
90 degree
45 degree
Spindle nose to table top (D)................... 0.8”-17.0”
Spindle C/L to Column (Movable) 6.875 – 23.50”
Load capacity........................................ 600 lbs.
Spindle taper CAT-30 or R8
Spindle speeds ...(B/G and H/G)............. 70-650 500-5000 RPM
23.6” (600 mm)
Transmission of spindle & motor Belt
Spindle Tooling Packages 30 Taper, collet or
Standard inch size holders

 

Standard Accessories
M400W Industrial PC 4th Axis Software Shop floor conversational Programming
Operation manual set Large 15” Color LCD Manual/Programmable Coolant system
Schematic Set Auto lube system (3) USB 2.0 ports & RS-232 Interface
6 GB solid state hard drive Halogen work light Compression Tapping
Cutter Compensation Table Chip guard (opt.) 1 Mb Part Program Size
Toolbox Subs & Macros Software  

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
  Dealer Map
Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations. Request one today!
     
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages  


- Remedy 5NC Rigid Head CNC Knee Mill -


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

 

 

 

Remedy 5NC Rigid Head CNC Knee Mill Features

*
Centroid M400W w/15” LCD 3 Axis CNC control w/Industrial PC PC is mounted on a swing arm for convenient positioning
*
Full CNC Z Axis CNC Control and machine
*
5 HP Spindle Motor, 40 Spindle Taper
*
Programmable 50-4,000 RPM spindle with HI-LO gears
*
Tilt - Swivel head and a Movable Ram
*
Hardened & Ground Table w/ Turcite-B coating on the X & Y axis ways
*
Precision 1 1/8” Ground ball screws for longer life and high accuracy
*
Limit switches on all axes
*
FC30 Meehanite Casting main frame, annealed, stabilized and stress relieved for long term reliability
*
Anti-rust Chrome Plated Quill ( 30/40 taper or R8 options )
*
Box ways design on Y axis to provide maximum rigidity and stability
*
Standard, rubber way covers on the Y axis ( front and rear )
*
Precision APEC class7 spindle bearing to ensure a longer life spindle and run out less than 0.00012
*
16” Knee Travel (optional power assist for the knee )
*
Automatic lubrication system with Low Lube alarm
*
X & Y Axis Jog buttons - - - MPG pulse handwheel (Optional)
*
Toolbox, schematic set and Manual set
Fixed and Movable Ram Models
CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.


Feed Rate:

Feed motors on XYZ..................... Delta AC .75 kW
Closed Loop
Rapid feed rate :(Delta AC System) X/Y: 150 ipm
Z: Manual
Cutting feed rate........................... 1-140 ipm
Motors:
Spindle motor/max torque.............. 5 HP
Coolant pump 0.3 HP
Lubrication pump.......................... 150 W
Power requirement 5 KVA, 3 Phase 208-230
Tool Changer: …………………….... Power Draw Bar (Opt)
Area Requirement (WxDxH): 125” x 100 x 97
Net Weight................................... 4,300 lbs.
Additional information:
Power requirement....................... 4 KVA 3 Ph. 208/230 VAC
( 220 V Single Phase Optional)
Air requirements 90 - 100 psi (w/Power Draw Bar)
Type of oil for Way oil /
oil chiller / pneumatic oil
Mobil Vactra #2/
Shell Tellus 32/ Air tool oil
Coolant capacity................... 5 Gallons

Machine Specifications:
Table size.............................................. 12" x 60"
Longitudinal travel (X axis) 38”
Cross travel (Y axis).............................. 16.5”
Vertical travel ( Z axis) 5.5”
Knee Travel ........................................... 16.5”
Head Tilt/swivel Swivel Rt/Lft
Tilt Front/back
None
None
Spindle nose to table top (D)................... 2.25”- 21.75”
Spindle C/L to Column (Movable) 6.875 – 23.50”
Load capacity........................................ 1000 lbs.
Spindle taper CAT-40 or R8
Spindle speeds ...(B/G and H/G)............. 70-650 500-5000 RPM
23.6” (600 mm)
Transmission of spindle & motor Belt
Spindle Tooling Packages 30 Taper, collet or
Standard inch size holders

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems


Standard Accessories
M400W Industrial PC 4th Axis Software Shop floor conversational Programming
Operation manual set Large 15” Color LCD Manual/Programmable Coolant system
Schematic Set Auto lube system (3) USB 2.0 ports & RS-232 Interface
6 GB solid state hard drive Halogen work light Compression Tapping
Cutter Compensation Table Chip guard (opt.) 1 Mb Part Program Size
Toolbox Subs & Macros Software  

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
  Dealer Map
Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations. Request one today!
     
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages  

Email Remedy Machine Sales, LLC Bruce Tollefson Tom Khoury Roger Gold & Chris Perseo Bavid Belding