Remedy Machine Sales, LLC

Email Remedy Machine Sales, LLC East Coast EDM Machinery Find A Dealer Near You


- Turning Center Model:  OL-1220 -


OL-1220Turning Center Features

*
Centroid T39W control with 15” LCD w/ Industrial PC
*
Conversational Programming and Fanuc G-Code compatible
*
5 HP Spindle Motor w/D1-4 Spindle Taper & 1 9/16” t/hole
*
4,000 rpm spindle
*
Hardened & Ground with dovetail ways
*
Precision C5 Double nut ball screws hardened & ground
for higher accuracy and longer life
*
FC30 Meehanite Cast base & head stock, annealed and stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Metal enclosure with 2 sliding front doors
*
Front Chip Pan
*
Programmable Coolant System
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (Standard)
*
X and Z MPG Manual Hand Wheel (Standard)

 

 



RL-1340

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Centroid M400WL CNC Control - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

Motor:
Spindle motor/max torque................. 5 HP    3.7kw
Spindle Nose taper D1-4
Spindle Bore/Bore taper.................... 1 9/16”  / M.T. #5
Spindle Speed:
300 – 4000 RPM
Transmission of spindle & motor........ Belt
Spindle center to Table top surface.
Tailstock:  
Tailstock quill Diameter................... 1.5” (38 mm)
Tailstock quill Taper M.T. #3
Tailstock quill Travel......................... 4” (100 mm)
Feed Rate:
Rapid feed rate............................... 180 ipm
Cutting feed rate 120 ipm
Feed motors on XYZ......................... Delta AC .75 KW
Motor:  
Coolant pump................................. 0.3 HP
Lubrication pump 150 W
Power requirement........................... 8 KVA, 3 Phase
208-230 voltage
Net Weight 1,750 lbs. (800 Kg)
Area Requirement........................... 70 x 45 x 60 (LxDxH)
Optional Table & Spindle Tooling Hirschmann

Specifications: 

Table........................................ Flat Tooling Table
Gang Type Tooling Centerline
Distance between Centers.......... 20” (500 mm)
Longitudinal travel (Z axis) 19.5" (500mm)
40mm x 10mm C5 Ball Screw
Cross travel (X axis)................... 6.3”” (160 mm)
 25mm x 5mm C5 Ball Screw
Spindle nose /Spindle Bore D1-4 / 1 9/16”
Spindle C/L Height.................... 8” (203 mm)
Swing over the Bed. 16” (405 mm)
Swing over cross slide............... 7” (180 mm)
Width of Bed ways 7.6” (190 mm)

Additional information: 

Power requirement..................... 6 KVA
3 phase 208 V/230 V max
Air requirement 90 - 100 psi
Type of oil for Way oil/
oil chiller/ pneumatic oil
Mobil Vactra #2/
Mobil 1 Gear/ Air tool oil
Coolant capacity........................ 10 Gallons

 
Standard Accessories
Full Enclosure 4 GB solid state hard drive
Operation manual Set Auto lube system
Leveling bolts & plates Halogen work light
Toolbox RS-232 & USB 2.0 ports
Coolant system Industrial PC
Shop floor programming / Conversational



- S-25L CNC Lathe -

S-25L


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Centroid M400WL CNC Control - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

 

 

S-25L CNC Lathe Features

*
Centroid T39W control with 15” LCD
*
Conversational Programming and Fanuc G-Code compatible
*
3 HP Spindle Motor Spindle Taper
*
6,000 rpm Cartridge spindle  with oil cooler
*
Hardened & Ground with Turcite-B coating guide ways
*
Precision Double nut ball screws hardened & ground for higher accuracy and longer life
*
FC30 Meehanite  Casting Base, Column and Head, annealed and stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Linear Guides on the X & Z Axes
*
Steel way covers on all axes
*
Programmable Coolant System
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (opt.)
*
X and Z MPG Manual Hand Wheel (Standard)

Spindle:

Spindle nose mounting.......... A2-3 Provided w/ 5C collect chuck
Max. bar capacity 1.0" (250 mm)
Hydraulic chuck size............ 4 inch (Optional)
Range of spindle speeds 50 to 6000 RPM
Rapid travel/Cutting feed rate 200 – 220 VAC 3 Ph.
Tooling:  
4” Hydraulic Chuck
or 5C Collet
See full quotation of specifications
I.D cutting tool (Boring) 5/8 inch *2 pcs
O.D cutting tool (turning)....... 5/8 inch *2 pcs
Tailstock:
Tailstock quill diameter......... N/A for this model
Motor:  
Main spindle motor............... 3 HP. 2.2KW
Machine Net weight 3,000 lbs.
Crate Dimension (LxDxH)...... 44” x63”x62”

Specifications:
Basic dimensions
Max. Turning Diameter...................... 1" (250 mm)
Swing over saddle 19.7"  (500 mm)
Longitudinal travel (Z axis)................. 5.9" (150 mm)
Cross slide travel (X axis) 7.87" (200 mm)
Table Size....................................... 7.2 x 17.3" (185 x 440 mm)
Flat bed:  
Guide ways...................................... Linear on X and Z axes


- Turning Center Models: K45G - K45T - K45GT Slant Bed Lathe -

 

K series Lathe

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Centroid M400WL CNC Control - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

 

 

K45G - K45T - K45GT Features

*
Centroid T39W control with 15” LCD w/Industrial PC
*
Conversational Programming and Fanuc G-Code compatible
*
7.5 HP Spindle Motor w/A2-5 Spindle Taper & 1.8” t/hole
*
5,000 rpm Cartridge spindle
*
Linear Guide ways on the X and Z Axes
*
Precision C5 Double nut ball screws hardened & ground for higher accuracy and longer life
*
FC30 Meehanite Casting Base, annealed and stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Metal enclosure with a large sliding front door
*
6” Hydraulic chuck and a four piece set of tooling
*
Programmable Coolant System
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (opt.)
*
X and Z MPG Manual Hand Wheel (Standard)

Motor:
Spindle motor/max torque..................... 7.5 Hp (5.5kw)
Spindle taper A2-5
Spindle Bore/Bore taper........................ 1.8” / M.T.
Spindle Speeds 50 – 5000 RPM
Transmission of spindle & motor............ Belt
Spindle center to Table top surface 3.35” (85 mm)
Tailstock:
I.D Tooling (Boring)............................... 1 inch
O.D Tooling (Turning) 5/8 inch
Feed Rate:
Rapid feed rate.................................... 300 ipm
Cutting feed rate 200 ipm
Feed motors on XYZ............................. Delta AC 1 KW
Motor:
Coolant pump...................................... 0.3 HP
Lubrication pump 150 W
Power requirement............................... 12 KVA,
3 Phase 208-230 voltage
Net Weight 6,500 lbs. (2600 Kg)
Width x Depth x Height (WxDxH)..........

85 x 60 x 60

Spindle & Table Work-holding options Hirschmann

Machine Specifications: 

Table............................................... Slant bed Lathe
Longitudinal Travel (Z Axis) 7.1"(180 mm)
40mm x 10mm C5 Ball Screw
Cross Slide Travel (X Axis)................ 10.0" (254 mm)
25mm x 5mm C5 Ball Screw
Spindle nose A2-5 (4” Hyd. Chuck Standard)
Max Swing...................................... 6.7” (170 mm)

Additional information: 

Power requirement 12 KVA
3 phase 208 V/230 V max
Air requirement................................. 90 - 100 psi
Type of oil for Way oil /
oil chiller / pneumatic oil
Mobil Vactra #2 /
Shell Tellus 32 / Air tool oil
Coolant capacity.............................. 20 Gallons

 
Standard Accessories
Full Enclosure 6 Inch Hydraulic Chuck
Operation manual Auto lube system
Leveling bolts & plates Halogen work light
Toolbox Coolant system
Industrial PC 4 GB solid state hard drive
Shop floor programming / Conversational
RS-232 & USB 2.0 ports



- KL 1440 CNC Lathe -

KL 1640



Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Centroid M400WL CNC Control - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

 

 

KL 1440 CNC Lathe Features

*
Centroid T400I control with 15” LCD w/Industrial PC
*
DConversational Programming and Fanuc G-Code compatible
*
5 HP Spindle Motor w/D1-4 Spindle Taper & 1 1/2” through hole
*
4,000 rpm Cartridge spindle  with 3 speed gear ranges
*
Hardened & Ground with Turcite-B coated ways
*
Precision C5 Double nut ball screws hardened & ground for higher accuracy and longer life
*
FC30 Meehanite  Casting Base, Head stock, annealed and stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Metal enclosure with 2 sliding front doors
*
Front Chip Pan
*
Programmable Coolant System
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (Standard)
*
X and Z MPG Manual Hand Wheel (Standard)
Tailstock  
Tailstock quill Diameter..................... 1.75”  (45 mm)
Tailstock quill Taper M.T. #3
Tailstock quill Travel......................... 4.75” (120 mm)
Feed Rate:
Rapid feed rate 180 ipm
Cutting feed rate.............................. 120 ipm
Feed motors on XYZ Delta AC 1 KW
Motor:  
Coolant pump.................................. 0.3 HP
Lubrication pump

150 W

Power requirement........................... 8 KVA, 3 Phase
208-230 voltage
Net Weight

2,450 lbs. (1250 Kg)

Area Requirement............................

96 x 74 x 77 (LxDxH)

Spindle and Table Tooling options

Hirschmann  / 
Hydraulic chuck

Machine Specifications: 

Table.............................................. Flat Bed tooling table
Quick Change Type Tooling  
Longitudinal travel (Z axis)................. 31.5" (800 mm)
40mm x 10mm C5 Ball Screw
Cross travel (X axis) 7.4” (190 mm) 25mm x 5mm
C5 Ball Screw
Spindle nose Mount D1-4 Cam lock
Spindle C/L Height........................... 7" (178 mm)
Swing over the Bed. 14" (356 mm)
Swing over cross slide...................... 8.5" (220 mm)
Width of Bed ways 11.8" (300 mm)
Distance between the centers............ 37.4”
Spindle motor/max torque................. 5 HP
Spindle taper D1-6
Spindle Bore/Bore taper................... 1.5”  / M.T. #5
Spindle Speed 3 Speed Manual Shift 25 – 4000 RPM
Transmission of spindle & motor....... Belt


- KL 1640 CNC Lathe -

 

KL 1640

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP
* indicates pictured machine

 

KL 1640 CNC Lathe Features

*
Rigid one piece FC30 Meehanite cast frame thermally balanced and stress relieved
*
D1-6” Camlock spindle w/ 2 1/8” spindle bore
*
Infinitely variable 3000 RPM with automatic Hi/Lo shift gear ranges
*
C5 Double Nut Precision Ground Ball Screws
*
Dual hand wheels
*
100% Laser tested positioning accuracy and repeatability
*
7.5HP spindle motor
*
3 sets of Precision taper roller spindle bearings which insures performance, run out is less than 0.00002”
*
Oil bath headstock, gearbox lubrication
*
Hardened & ground bed ways with Turcite-B coating
*
Halogen work lamp
*
Automatic lubrication system
*
Tool box and touch up paint
*
Dual Handwheels for manual operation
Motor:
Spindle motor/max torque................. 7.5 Hp (Std.)
KVA rating 12 KVA 30 amps
Coolant pump (optional).................. 1/8HP
Lubrication system Automatic lubrication
Power requirements.......................... 200 – 220 VAC 3 Ph.
Area (LxWxH) 96” x 75” x 77”
Machine weight................................ 3,650 lbs.
Air requirements none
Way oil............................................ Mobil Vectra #
Coolant capacity 20 gallons

Spindle
:
Spindle speeds................................ 35 – 3000 RPM
Spindle speed steps 2 steps  autoshift
Floor to spindle center...................... 42”
Spindle bore 2 1/8”
Spindle nose.................................... D1-6
Spindle bore taper

MT#6

Chuck sizes available....................... 6”, 8”, 10”
Centroid M400WL CNC Control - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.


Machine Specifications: 

Swing over the bed........................... 16”
Swing over the saddle 7 5/8”
Swing over the cross slide................. 9”
Bed ways width 11.80”
Distance between the centers............ 37.4”





Threading & Feeds:
Longitudinal ballscrew (Z Axis) travel........................ 31.5”
Longitudinal ballscrew diameter/pitch 40mm x 10mm C5
Cross slide ballscrew (X Axis) travel......................... 7.4”
Cross slide ballscrew diameter/pitch 25mm x 5mm C5
Rapid travel rate..................................................... 120 ipm
Tailstock quill diameter 2.05”
Tailstock quill travel................................................. 6”
Tailstock quill taper MT#4
Standard Accessories
Full enclosure w/slide door T-Slotted top slide
Follow rest Dead center MT#3
Leveling bolts & plates Coolant system
Shop floor programming / Conversational


- KL 1840 CNC Lathe -


KL 1840


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Centroid M400WL CNC Control - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

 

 

KL 1840 CNC Lathe Features

*
Centroid T400I Control, Mounted to Swing and slide with 15” LCD w/Industrial PC
*
Conversational Programming and Fanuc G-Code compatible
*
7.5 HP Spindle Motor w/D1-6 Spindle Taper & 2 1/8” t/h
*
3,000 rpm Cartridge spindle w/auto 2 speed gear ranges
*
Hardened & Ground ways with Turcite-B coated ways
*
Precision C5 Double nut ball screws, hardened & ground for higher accuracy and longer life
*
FC30 Meehanite  Casting Base, Head stock, annealed and stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Metal enclosure with 2 sliding front doors
*
Large Chip Pan
*
Programmable Coolant System
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (Standard)
*
X and Z MPG Manual Hand Wheel (Standard)

Tailstock:
Tailstock quill Diameter 2.28” (58 mm)
Tailstock quill Taper............................. M.T. #4
Tailstock quill Travel 6.6” (170 mm)
Feed Rate:
Rapid feed rate.................................... 180 ipm
Cutting feed rate 120 ipm
Feed motors on XYZ............................ Delta AC 1 KW

Motor: 

Coolant pump 0.3 HP
Lubrication pump................................. 150 W
Power requirement 8 KVA,
3 Phase 208-230 voltage
Net Weight......................................... 4,400 lbs. (2000 Kg)
Width x Depth x Height (WxDxH) 96 x 74 x 87”
Optional Table and Spindle Tooling......... Hirschmann


Machine Specifications: 

Table.............................................. Flat Tooling Table
Gang Type Tooling ¾ or 1” tooling recommended
Longitudinal Travel (Z Axis)............... 32"(810 mm)
40mm x 10mm C5 Ball Screw
Cross Slide Travel (X Axis) 11" (280 mm)
25mm x 5mm C5 Ball Screw
Spindle nose................................... Collet Nose ( Hyd. Chuck Opt)
Height of center 9” (230 mm)
Swing over the Bed.......................... 18” (460 mm)
Swing over cross slide 9” (230 mm)
Width of Bed ways........................... 11.8” (300 mm)
Distance between Centers 39.4” (1000 mm)
Spindle motor/max torque................. 7.5 HP 5.5 KW
Spindle taper Std. A1-6 or D1-6 opt.
Spindle Bore/Bore taper................... 2 1/8”/M.T. #6  (Sleeve MT#4)
Spindle Speed:  2 Speed Automatic Shift 25 – 3000 RPM 
Transmission of spindle & motor....... Belt


Standard Accessories
Full Enclosure 6 Inch Hydraulic Chuck
Operation manual Auto lube system
Leveling bolts & plates Halogen work light
Toolbox Coolant system
Industrial PC 4 GB solid state hard drive
Shop floor programming / Conversational
RS-232 & USB 2.0 ports



- Turning Center Model:  KL21” Series CNC Lathes -



KL2160


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Centroid M400WL CNC Control - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

 

 

Turning Center Model:  KL21” Series CNC Lathes Features

*
Centroid T400I Control, Mounted to Swing and slide with 15” LCD w/Industrial PC
*
Conversational Programming and Fanuc G-Code compatible
*
10 HP Spindle Motor w/D1-8 Spindle Taper & 3 3/8” t/h
*
2,000 rpm Cartridge spindle w/auto 3 speed/gear ranges
*
Hardened & Ground ways with Turcite-B coated slide
*
Precision C5 Double nut ball screws, hardened & ground for higher accuracy and longer life
*
FC30 Meehanite Cast base & head stock, annealed and stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Metal enclosure with 2 sliding front doors
*
13.8” wide Bed way design for extra rigidity
*
Programmable Coolant System w/ large chip pan
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (Standard)
*
X and Z MPG Manual Hand Wheel (Standard)
Specifications 2140 2160 2180
Distance between Centers 39.4” 59.1" 78.75"
Longitudinal travel (Z axis)............
40mm x 10mm C5 Ball Screw
31.5" 51.2" 70.8"
Net Weight 6,200 lbs 6,950 lbs 7,700 lbs
Length x Depth x Height (LxDxH). 96 126 150 x 74 x 87”
Table Flat Tooling Table
Gang Type Tooling............................ ¾ or 1” tooling is recommended
Cross travel (X axis) 11.6” (295 mm)
25mm x 5mm C5 Ball Screw
Spindle nose.................................... Collet Nose (Hyd. Chuck Optional)
Height of center 10.5 (267 mm)
Swing over the Bed........................... 21 (535 mm)
Swing over cross slide 12 (310 mm)
Width of Bed ways........................... 13.8 (350 mm)
Spindle motor/max torque 10 HP    7.4 kw
Spindle Nose taper........................... Std. D1-8 or Optional D1-11
Spindle Bore/Bore taper 3 3/8” (opt. 4.13”) /
M.T. #7 (Sleeve MT#5)
Spindle Speed: 3 Speed Automatic Shift 25-110 111-440  441-2000 RPM
Transmission of spindle & motor........ Belt

Additional information: 

Power requirement 12 KVA 3 phase
208 V/230 V max
Air requirement................................ 90 - 100 psi
Type of oil for Way oil/
oil chiller/ pneumatic oil
Mobil Vactra #2/
Mobil 1 Gear/ Air tool oil
Coolant capacity.............................. 20 Gallons

Tailstock: 

Tailstock quill Diameter.................... 2.5”  (63 mm)
Tailstock quill Taper M.T. #5
Tailstock quill Travel......................... 7” (180 mm)

Feed Rate: 

Rapid feed rate 270 ipm
Cutting feed rate............................... 150 ipm
Feed motors on XYZ Delta AC 1 KW

Motor: 

Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 8 KVA,
3 Phase 208-230 voltage


Standard Accessories
Full Enclosure Rigid Tapping
Operation manual Auto lube system
Leveling bolts & plates Halogen work light
Toolbox Industrial PC  w/15” Color LCD
Coolant system 4 GB solid state hard drive
Shop floor programming / Conversational
RS-232 & USB 2.0 ports



- Turning Center Model:  KL24” Series CNC Lathes -



KL24


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Centroid M400WL CNC Control - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

 

 

Turning Center Model:  KL24” Series CNC Lathes Features

*
Centroid T400I Control, Mounted to Swing and slide with 15” LCD w/Industrial PC
*
Conversational Programming and Fanuc G-Code compatible
*
10 HP Spindle Motor w/D1-8 Spindle Taper & 3 3/8” t/h
*
25-2,000 rpm Cartridge spindle w/auto 3 speed/gear ranges
*
Hardened & Ground ways with Turcite-B coated slide
*
Precision C5 Double nut ball screws, hardened & ground for higher accuracy and longer life
*
FC30 Meehanite Cast base & head stock, annealed and stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Metal enclosure with 2 sliding front doors
*
13.8” wide Bed way design for extra rigidity
*
Programmable Coolant System w/ large chip pan
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (Standard)
*
X and Z MPG Manual Hand Wheel (Standard)
Specifications 2440 2460 2480
Distance between Centers 39.4” 59.1" 78.75"
Longitudinal travel (Z axis)............
40mm x 10mm C5 Ball Screw
31.5" 51.2" 70.8"
Net Weight 6,200 lbs 6,950 lbs 7,700 lbs
Length x Depth x Height (LxDxH). 96 126 150 x 74 x 87”
Table Flat Tooling Table
Gang Type Tooling........................... ¾ or 1” tooling is recommended
Cross travel (X axis) 11.6” (295 mm)
25mm x 5mm C5 Ball Screw
Spindle nose.................................... Collet Nose (Hyd. Chuck Optional)
Height of center 12 (305 mm)
Swing over the Bed........................... 24 (609 mm)
Swing over cross slide 13.5 (345 mm)
Width of Bed ways........................... 13.8 (350 mm)
Spindle motor/max torque 10 HP    7.4 kw
Spindle Nose taper........................... Std. D1-8  or Optional D1-11
Spindle Bore/Bore taper 3 3/8” (opt. 4.13”) /
M.T. #7  {Sleeve MT#5)
Spindle Speed: 3 Speed Automatic Shift 25-110 111-440  441-2000 RPM
Transmission of spindle & motor........ Belt

Additional information: 

Power requirement 12 KVA 3 phase
208 V/230 V max
Air requirement................................. 90 - 100 psi
Type of oil for Way oil/
oil chiller/ pneumatic oil
Mobil Vactra #2/
Mobil 1 Gear/ Air tool oil
Coolant capacity.............................. 20 Gallons

Tailstock: 

Tailstock quill Diameter..................... 2.5”  (63 mm)
Tailstock quill Taper M.T. #5
Tailstock quill Travel......................... 7” (180 mm)

Feed Rate: 

Rapid feed rate 180 ipm
Cutting feed rate............................... 150 ipm
Feed motors on XYZ Delta AC 1 KW

Motor: 

Coolant pump 0.3 HP
Lubrication pump............................. 150 W
Power requirement 8 KVA,
3 Phase 208-230 voltage

 

Standard Accessories
Full Enclosure Rigid Tapping
Operation manual Auto lube system
Leveling bolts & plates Halogen work light
Toolbox Industrial PC  w/15” Color LCD
Coolant system 4 GB solid state hard drive
Shop floor programming / Conversational
RS-232 & USB 2.0 ports



- Turning Center Model:  KL30” Series CNC Lathes -




KL24

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Centroid M400WL CNC Control - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

 

 

Turning Center Model:  KL30” Series CNC Lathes Features

*
Centroid T400I Control, Mounted to Swing and slide with 15” LCD w/Industrial PC
*
Conversational Programming and Fanuc G-Code compatible
*
15 HP Spindle Motor w/A2-11 Spindle Taper & 4.13” t/h
*
20-1,300 rpm Cartridge spindle w/auto 3 speed/gear ranges
*
Hardened & Ground ways with Turcite-B coated slide
*
Precision C5 Double nut ball screws, hardened & ground for higher accuracy and longer life
*
FC30 Meehanite Cast base & head stock, annealed and stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Metal enclosure with 2 sliding front doors
*
14” wide Bed way design for extra rigidity
*
Programmable Coolant System w/ large chip pan
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (Standard)
*
X and Z MPG Manual Hand Wheel (Standard)
Specifications 3060 3080 30120 30160
Distance between Centers 59.1” 78.75" 118.1" 157.5"
Longitudinal travel (Z axis)
40mm x 10mm C5 Ball Screw
51.2" 70.8" 110.0" 132.5"
Net Weight (lbs) 8,400 8,950 9,700 11,800
Length x Depth x Height
(LxDxH)
110 150 190 220 x 74 x 87”
Table................................................ Flat Tooling Table
Gang Type Tooling ¾ or 1” tooling is recommended
Cross travel (X axis)........................... 11” (280 mm) 25mm x 5mm C5 B/S
Spindle nose A2-11
Height of center................................. 15' (305 mm)
Swing over the Bed 30.31" (770 mm)
Swing over cross slide....................... 13.5 (345 mm)
Width of Bed ways 13.8 (350 mm)
Spindle motor/max torque.................. 15 HP
Spindle Nose taper Std. A2-11
Spindle Bore/Bore taper..................... 4.13” / M.T. #7  {Sleeve MT#5)
Spindle Speed: 3 Speed Automatic Shift 30-72  73-286  287-1300 RPM
Transmission of spindle & motor......... Belt

Additional information: 

Power requirement 12 KVA 3 phase
208 V/230 V max
Air requirement................................. 90 - 100 psi
Type of oil for Way oil/
oil chiller/ pneumatic oil
Mobil Vactra #2/
Mobil 1 Gear/ Air tool oil
Coolant capacity.............................. 35 Gallons

Tailstock: 

Tailstock quill Diameter.................... 2.5”  (63 mm)
Tailstock quill Taper M.T. #5
Tailstock quill Travel......................... 7” (180 mm)

Feed Rate: 

Rapid feed rate 180 ipm
Cutting feed rate............................... 150 ipm
Feed motors on XYZ Delta AC 1 KW

Motor: 

Coolant pump................................... 0.3 HP
Lubrication pump 150 W
Power requirement........................... 8 KVA,
3 Phase 208-230 voltage

 

Standard Accessories
Full Enclosure Rigid Tapping
Operation manual Auto lube system
Leveling bolts & plates Halogen work light
Toolbox Industrial PC  w/15” Color LCD
Coolant system 4 GB solid state hard drive
Shop floor programming / Conversational
RS-232 & USB 2.0 ports



- Turning Center Model:  KL32” Series CNC Lathes -




KL32


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Centroid M400WL CNC Control - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.



 

Turning Center Model:  KL32” Series CNC Lathes Features

*
Centroid T400I Control, Mounted to Swing and slide with 15” LCD w/Industrial PC
*
Conversational Programming and Fanuc G-Code compatible
*
15 HP Spindle Motor w/A2-11 Spindle Taper & 4” t/h
*
20-1,300 rpm Cartridge spindle w/auto 3 speed/gear ranges
*
Hardened & Ground ways with Turcite-B coated slide
*
Precision C5 Double nut ball screws, hardened & ground for higher accuracy and longer life
*
FC30 Meehanite Cast base & head stock, annealed and stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Metal enclosure with 2 sliding front doors
*
14” wide Bed way design for extra rigidity
*
Programmable Coolant System w/ large chip pan
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (Standard)
*
X and Z MPG Manual Hand Wheel (Standard)
Specifications 3260 3280 32120 32160 32200
Distance between Centers (inches) 59.6 78.74 118.1 157.5 196.85
Longitudinal travel
(Z axis) (inches)
40mm x 10mm C5 Ball Screw
51.2 70.8 110.0 132.5 172.5
Net Weight (lbs) 8,400 8,950 9,700 11,800 13,250
LengthxDepthxHeight
(LxDxH) (inches)
110 150 190 190 190 x 74 x 87”
Table.............................................. Flat Tooling Table
Gang Type Tooling ¾ or 1” tooling is recommended
Cross travel (X axis)......................... 16” (406 mm) 25mm x 5mm C5 B/S
Spindle nose A2-11
Height of center............................... 16' (406 mm)
Swing over the Bed 33.7 " (840 mm)
Swing over cross slide...................... 114.8 (375 mm)
Width of Bed ways 13.8 (350 mm)
Spindle motor/max torque................. 15 HP
Spindle Nose taper Std. A2-11
Spindle Bore/Bore taper.................... 4.13” / M.T. #7  {Sleeve MT#5)
Spindle Speed: 3 Speed Automatic Shift 30-72  73-286  287-1300 RPM
Transmission of spindle & motor........ Belt

Additional information: 

Power requirement 12 KVA 3 phase
208 V/230 V max
Air requirement................................ 90 - 100 psi
Type of oil for Way oil/
oil chiller/ pneumatic oil
Mobil Vactra #2/
Mobil 1 Gear/ Air tool oil
Coolant capacity.............................. 35 Gallons

Tailstock: 

Tailstock quill Diameter.................... 2.5”  (63 mm)
Tailstock quill Taper M.T. #5
Tailstock quill Travel......................... 7” (180 mm)

Feed Rate: 

Rapid feed rate 180 ipm
Cutting feed rate............................... 150 ipm
Feed motors on XYZ Delta AC 
 Z=2 KW  X=1 KW

Motor: 

Coolant pump.................................. 0.3 HP
Lubrication pump 150 W
Power requirement........................... 8 KVA,
3 Phase 208-230 voltage

 

Standard Accessories
Full Enclosure Rigid Tapping
Operation manual Auto lube system
Leveling bolts & plates Halogen work light
Toolbox Industrial PC  w/15” Color LCD
Coolant system 4 GB solid state hard drive
Shop floor programming / Conversational
RS-232 & USB 2.0 ports



- Turning Center Model:  KL50” Series CNC Lathes -




KL40


** WE RESERVE THE RIGHT TO CHANGE DESIGN, COLOR, SPECIFICATIONS, OR PRICE WITHOUT NOTICE **

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Centroid M400WL CNC Control - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

ures.

 

Turning Center Model:  KL50” Series CNC Lathes Features

*
Fagor 8055i CNC Lathe control with Industrial PC
*
Conversational Programming by Fagor
*
30 HP Delta Vector Spindle Motor providing high torque at all speeds
*
Standard 6” w/A2-11 Spindle Taper – 9” or 12” Through Holes w/A2-15, A2-20, A2-25 T.
*
Dual chucks, one on each side of the Headstock for long pipe support
*
5-30, 31-150, 151-750  Spindle speed ranges
*
Higher torque provided with the automatic changing 3 speed gear box
*
Ways are Hardened & Ground, with Turcite-B coating and the Gibbs are hand scraped
*
Precision C5 Double nut ball screws hardened & ground for higher accuracy and longer life
*
FC30 Meehanite Heavy duty Casting, stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Metal enclosure with multiple sliding front doors
*
Telescopic way covers on the X axis
*
Large Chip Pan
*
Programmable Coolant System
*
Automatic lubrication system with Low Lube alarm
*
Made in Taiwan
*
Rigid tapping (opt.)
*
X and Z MPG Manual Hand Wheels (Standard)
Specifications 40120 40160 40200
Longitudinal travel (Z axis)........
118.0 155.0 196.0
Net Weight 14,500 lbs 19,000 lbs 21,000 lbs
Length x Depth x Height (LxDxH) 185 315 380 x 125 x 90"
Table........................................... Flat Tooling Table
Gang Type Tooling 1” tooling recommended
Cross travel (X axis)....................... 26”” (680 mm)
25mm x 5mm C5 Ball Screw
Spindle nose Mounting Std: A2-11 Optional: A2-15, A2-20, A2-25
Height of center............................. 25.6 (650 mm)
Swing over the Bed 51 (1300 mm)
Swing over cross slide.................... 35 (900 mm)
Width of Bed ways 30 (770 mm)
Spindle motor/max torque............... 30 HP  Optional 40HP
Spindle taper Std. A2-11 or A2-15/20/25 - optional
Spindle Bore Taper/Sleeve taper..... M.T. #7  {Sleeve MT#5)
Spindle Speed: 2 Speed Automatic Shift 5 – 750 RPM 3 Speed Automatic shifting
Transmission of spindle & motor..... Belt

Additional information: 

Air requirement 90 - 100 psi
Type of oil for Way oil/
oil chiller/ pneumatic oil..................
Mobil Vactra #2/
Mobil 1 Gear/ Air tool oil
Coolant capacity 40 Gallons

 

Tailstock: 

Tailstock quill Diameter.................... 4”  (165 mm)
Tailstock quill Taper M.T. #6
Tailstock quill Travel......................... 11.8” (300 mm)

Feed Rate: 

Rapid feed rate 180 ipm
Cutting feed rate............................... 120 ipm
Feed motors on XYZ Fagor AC Drive system   Z=3 KW / X=1 KW

Motor: 

Coolant pump 0.3 HP
Lubrication pump............................. 150 W Auto Lube system w/ Low Lube alarm
Power requirement 55 KVA,
3 Phase 208-230 voltage

**Additional costs which will be quoted to you with our formal proposal
- Shipping to the port of Baltimore, MD., as a deep water port is required.
- Heavy use road trucking, and permits may be required.
- A special Machine foundation is required. We provide you the required data.
- Special rigging is required, and only a insured rigger is to be used.
- Heavy Electrical requirements will be reviewed with you.
- 10 days of installation, and in house training are provided.

Standard Accessories
Full Enclosure Constant Surface Speed
Operation manual Set Auto lube system
Leveling bolts & plates Halogen work light
Toolbox Industrial PC 
Coolant system solid state hard drive
Shop floor programming / Conversational
RS-232 & USB 2.0 ports



- RL3040NC Wheel Repair Lathe -



RL-1340


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Centroid M400WL CNC Control - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

 

 

RL3040NC Wheel Repair Lathe Features

*
Centroid T400I Control, Mounted to Swing and slide with 15” LCD w/Industrial PC
*
Conversational Programming and Fanuc G-Code compatible
*
10 HP Spindle Motor w/D1-8 Spindle Taper & 3 3/8” t/h
*
Centroid Digitizing probe and software to fix wheels
*
2,200 rpm Cartridge spindle w/auto 3 speed/gear ranges
*
Hardened & Ground ways with Turcite-B coated slide
*
Precision C5 Double nut ball screws, hardened & ground for higher accuracy and longer life
*
FC30 Meehanite Cast base & head stock, annealed and stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Metal enclosure with 2 sliding front doors
*
14” wide Bed way design for extra rigidity
*
Programmable Coolant System w/ large chip pan
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (Standard)
*
X and Z MPG Manual Hand Wheel (Standard)

Motor:
Spindle motor/max torque.......... 10 HP    7.5kw
Spindle Nose taper Std. D1-8 or D1-11 opt.
Spindle Bore/Bore taper............. 3.3/8” / M.T. #7 (Sleeve MT#5)
Spindle Speed:
2 Speed Automatic Shift
27-124 125-490 491-2200 RPM 
3 Speed Automatic shifting
Transmission of spindle & motor. Belt
Tailstock:  
Tailstock quill Diameter............. 2.5” (63 mm)
Tailstock quill Taper M.T. #5
Tailstock quill Travel.................. 7” (180 mm)
Feed Rate:
Rapid feed rate......................... 180 ipm
Cutting feed rate 120 ipm
Feed motors on XYZ................. Delta AC 1 KW
Motor:  
Coolant pump........................... 0.3 HP
Lubrication pump 150 W
Power requirement.................... 8 KVA, 3 Phase 208-230 voltage
Net Weight 7,100
Length x Depth x Height (LxDxH) 110 x 74 x 87”
Optional Table & Spindle Tooling Hirschmann

Specifications: 

Table........................................ Flat Tooling Table
Gang Type Tooling ¾ or 1” tooling is recommended
Distance between Centers.......... 39.4”
Longitudinal travel (Z axis) 31.5 40mm x 10mm C5 Ball Screw
Cross travel (X axis)................... 11.6” (295 mm)
 25mm x 5mm C5 Ball Screw
Spindle nose D1-8 (Hyd. Chuck special Option)
Height of center......................... 15” (380 mm)
Swing over the Bed. 30” (760 mm)
Swing over cross slide............... 166” (410 mm)
Width of Bed ways 13.8” (350 mm)

Additional information: 

Power requirement.................... 15 KVA
3 phase 208 V/230 V max
Air requirement 90 - 100 psi
Type of oil for Way oil/
oil chiller/ pneumatic oil
Mobil Vactra #2/
Mobil 1 Gear/ Air tool oil
Coolant capacity........................ 9 Gallons

Standard Accessories
Full Enclosure Constant Surface Speed
Operation manual Set Auto lube system
Leveling bolts & plates Halogen work light
Toolbox 12” 3 Jaw Chuck
Coolant system Rigid Tapping
4 way tool post 4 GB solid state hard drive
Industrial PC  w/15” Color LCD RS-232 & USB 2.0 ports
Shop floor programming / Conversational
Digitizing PKG software & 3 days Training


Email Remedy Machine Sales, LLC Bruce Tollefson Tom Khoury Roger Gold & Chris Perseo Bavid Belding