Remedy Machine Sales, LLC

Email Remedy Machine Sales, LLC East Coast EDM Machinery Find A Dealer Near You


- S8 Machining Center -

 


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.


Table Work-holding Options:
- System 3R - Kurt – Sunspot,
and most every table tool and fixture package

 

Maximum machining with a small footprint. You get much more with a Remedy-Mill!




S8 Machining Center Features

*
Centroid M400W control with 15” LCD w/Industrial PC
*
Conversational Programming which makes and
runs Fanuc Style G-Codes
*
8 Station Carousel ATC
*
1.55 or 3 HP Spindle Motor, BT30 Spindle Taper
*
8,000 rpm Programmable spindle speed
*
Delta Axis Motors and drives, Delta Spindle inverter
*
Linear Guide ways X-Y-Z
*
Precision ball screws hardened & ground for
higher accuracy
*
Meehanite  Casting Base, Column and Head, annealed
and stress relieved for long term reliability, mounted
on a steel base
*
100% Laser tested positioning accuracy & repeatability
*
Steel way covers on all three axes
*
Coolant System and air blast system
*
Automatic lubrication system with Low Lube alarm
*
Coolant system and chip pan
*
Coolant system Oil Skimmer (opt.)
*
Rigid tapping (opt.)
*
MPG Manual Hand Wheel (opt.)

Feed Rate:

Rapid feed rate................... X/Y: 200ipm   Z: 240 ipm
Cutting feed rate 1-200 ipm
Axis servo motors.............. Delta 0.75 KW
Motor:
Spindle motor/max torque.. 1.55 HP optional 3 HP
Coolant pump 0.3 HP
Lubrication pump................ 150 W
Power requirement 10 KVA,
3 Phase 208-230 voltage
Spindle Tooling Packages BT 30 Taper collet or Standard BT inch size holders
   

The 8 Station ATC with chip cover. Manual Release button. Multiple Flexible Coolant lines. Metal way covers.

System 3R Tooling provides you All the flexibility you need to do accurate production machining



- Space Saver Plus VM-350 -

VM350

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

 

Space Saver Plus VM-350 Features

*
Centroid M400W control with 15” LCD w/Industrial PC
*
Conversational Programming and is Fanuc G-Code compatible
*
8 Station Carousel ATC
*
3 HP Spindle Motor, BT30 Spindle Taper
*
10,000 rpm Programmable spindle
*
Delta Axis Motors and drives, Delta Spindle inverter
*
Linear Guide ways X-Y-Z Axes
*
Precision ball screws hardened & ground for higher accuracy and longer life
*
Full Meehanite Casting Base, Column and Head; annealed and stress
relieved for long term reliability
*
100% Laser tested for positioning & repeatability accuracy
*
Telescopic steel way covers on all three axes
*
Coolant System and air blast system
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (opt.)
*
Front access  to the Coolant system and chip pan
*
MPG Manual Hand Wheel (opt.)
Feed Rate:
Rapid feed rate X/Y: 325ipm Z: 310 ipm
Cutting feed rate............................. 1-300 ipm
Feed motors on XYZ. Delta 0.75 KW  Z =1.0KW
Motor:
Spindle motor/max torque............... 3 HP  /  2.2 kw
Coolant pump 0.3 HP - 20 Gallon Capacity
Lubrication pump 150 W
Power requirements........................ 10 KVA,
3 Phase 208-230 voltage
Width x Depth x Height (WxDxH) 63” x 51” x 74”
Machine weight............................. 2,800 lbs. (1275 Kg)

Automatic Tool Changer:

No. of tools.................................... 8
Max. tool diameter 2.0”    (50 mm)
Spindle Tooling Packages 30 Taper collet or
Standard inch size holders

Machine Specifications: 

Table size................................................. 15.7” x 9.8” (400x250 mm)
Longitudinal travel (X axis) 13.7" (350 mm)
Cross travel (Y axis)................................... 9.8” (250 mm)
Vertical travel (Z axis) 11.75” (300 mm)
Spindle nose to table top (D)....................... 2.7”-14.5” (70-370 mm)
Spindle center to column front surface 11.8” (300 mm)
Load capacity...........................................

140 lbs. (60 Kg)

Spindle taper............................................. BT30
Spindle speeds 100-10,000 rpm
Transmission of spindle & motor.................. Belt

Standard Accessories
M400W Industrial PC 4th Axis Software Shop floor conversational Programming
Operation manual set Large 15” Color LCD Manual/Programmable Coolant system
Schematic Set Auto lube system (3) USB 2.0 ports & RS-232 Interface
6 GB solid state hard drive Halogen work light Compression Tapping
Cutter Compensation Leveling Bolts & Pads 1 Mb Part Program Size
Subs & Macros Software Full Enclosure Toolbox



- Machining Center Model:  Maxi-Mill E216 -

Watch Video


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Video Link Digitizing: Using a Remedy mill with a Centroid Control to copy a part with the digitizing probe and then mill the part. Multiple part demonstrations are shown..

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

 

Machining Center Model:  Maxi-Mill E216 Features

*
Centroid M400W control with 15” LCD with Industrial PC
*
Conversational Programming and Fanuc G-Code compatible
*
16 Station Carousel ATC
*
7.5 HP Spindle Motor, BT40 or CAT40 Spindle Taper
*
6,000 rpm spindle speed with spindle oil cooler
*
6,000 rpm Std. Opt.10K with spindle oil cooler
*
Delta Axis Motors and drives, Delta Spindle inverter
*
Hardened & Ground table with Turcite-B coating on the ways
*
Double nut precision ball screws 1.16” Dia. hardened and ground for higher accuracy
*
FC30 Meehanite  Casting Base, Column and Head, annealed and
stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Box ways design on Y axis to provide maximum rigidity
*
Steel way covers on all three axes
*
Coolant System and air blast system
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (opt.)
*
MPG Manual Hand Wheel (opt.)
Don’t purchase a Mini, when you get much more with a Maxi-Mill!

Feed Rate:

Rapid feed rate............................ X/Y: 320ipm   Z: 240 ipm
Cutting feed rate 1-250 ipm
Feed motors on XYZ.................... AC Delta 1 KW Closed Loop
Motor:
Spindle motor/max torque............ 7.5HP  /  7.5KW
Coolant pump 0.3 HP
Lubrication pump........................ 150 W
Power requirements 14 KVA,
3 Phase 208-230 voltage

Automatic Tool Changer:

 
No. of tools................................. 16
Max. tool diameter 3.5” (90 mm)
Max. tool weight.......................... 15 lb. (7 Kg)
Length x Width x Height (LxDxH) 86” x 90” x 98.5”
(2200 x 2100 x 2490mm)
Net Weight................................. 15 lb. (7 Kg)
Spindle Tooling Packages 40 Taper collet or Standard inch size holders

Additional information:

 
Power requirement...................... 14 KVA
3 phase 208 V/230 V max
Air requirement 90 - 100 psi
Type of oil for Way oil/ oil chiller/ pneumatic oil Mobil Vectra #2/
Shell Tellus 32/ Air tool oil
Coolant capacity........................ 26 Gallons

Machine Specifications: 

Table size.......................................... 14.2” x 34.4” (360x880 mm)
Longitudinal travel (X axis) 26.0” (660 mm)
Cross travel (Y axis)........................ 16.1” (410 mm)
Vvertical travel 20.1” (510 mm)
Spindle nose to table top (D)............... 4.1” – 24.1” (105-615 mm)
Spindle C/L to Column 17.7
Table load capacity............................. 900 lbs. (545 Kg)
Spindle taper BT-40 or CAT 40
Spindle speeds (RPM)........................ 6000 rpm
Transmission of spindle & motor Belt
Spindle center to column..................... 17.7” (450 mm)
Feed Rate  
Automatic tool changer................... 16 Tools carousel
Tool max.(dia./weight) ea. 3.5” / 15 lbs.

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems
Standard Accessories
M400W Industrial PC 4th Axis Software Shop floor conversational Programming
Operation manual set Large 15” Color LCD Manual/Programmable Coolant system
Schematic Set Auto lube system (3) USB 2.0 ports & RS-232 Interface
6 GB solid state hard drive Halogen work light Compression Tapping
Cutter Compensation Leveling Bolts & Pads 1 Mb Part Program Size
Subs & Macros Software Full Enclosure Toolbox



- Remedy CNC Bed Mill -
A2-7H (8000 rpm)


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.
Machine Specifications: 
Table Size: (Hardened and Ground) 10” x 54” Table has (3) “T” Slots
Longitudinal travel (X axis) 33.8”
Cross travel (Y axis)............................. 19.6”
Vertical travel (Z-axis) 25.1”
 
Spindle nose to table top (D) 4.3”~29.1”
Spindle center to column front surface.... 16.5”
Load capacity 1100 lb.
Spindle taper........................................ BT40 or CAT40
Spindle Speed (RPM) 50-8000
Transmission of Power motor to spindle.. Belt
Spindle Inverter brand Delta
Automatic tool changer..................... 16 Station umbrella
Feed Rate:
Rapid feed rate................................. X/Y: 240 ipm Z: 220 ipm
Cutting feed rate 1-150 ipm
Feed motors on XYZ.........................

Delta AC Motors & Drives

Axis Motor Size

XY=1.0 kW
Z=1.0 kW

Motors:
Spindle motor HP Rating................... 7.5 HP
Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 15 KVA, 3 Ph. 208-230 VAC
General:
Area requirement.............................. 115 x 85 x 102H
Weight 4,600 lbs
Air Required.................................... Yes


 

Remedy CNC Bed Mill A2-7H (8000 rpm) Features

*
Centroid M400W control with 15” LCD and Industrial PC
*
Rigid Head with 25.1” Full CNC Z axis operation
*
Delta Axis Motors and drives, Delta Spindle inverter
*
7.5 HP Spindle Motor, CAT40-NMTB40 Spindle Taper
*
50-8,000 rpm Programmable spindle
*
Hardened & Ground with Turcite-B coating on all machine ways
*
Precision Double nut ball screws, hardened and ground for longer life,
higher accuracy and better repeatability
*
FC30 Meehanite Casting Base, Column and Head; annealed and stress
relieved for long term stability and reliability
*
100% Laser tested providing positioning accuracy & repeatability
*
Box way design on the Y  & Z axes to provide maximum rigidity
and stability
*
Full Enclosure with metal telescoping way covers
*
Programmable Coolant System
*
Automatic lubrication system with Low Lube alarm
*
Built in Quartz Work Lamp
*
MPG Manual Hand box with axis and speed controls (opt.)

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Standard Accessories
M400W Industrial PC Large 15” Color LCD Shop floor conversational Programming
Operation manual set Auto lube system Manual/Programmable Coolant system
Schematic Set Halogen work light (3) USB 2.0 ports & RS-232 Interface
Toolbox Leveling Bolts & Pads 6 GB solid state hard drive
1 Mb Part Program Size Compression Tapping Cutter Compensation
4th Axis Software  


Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
Dealer Map


Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Check out all of the Tooling Package choices we offer for your New Remedy Machine.

  Mill Tooling Packages  


- Machining Center Model: E-422 Open or Full Enclosure -

E422FE
Full Enclosure Pictured 

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

CNC Control Centroid M400 - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

 

 

Machining Center Model: E-422 Features

*
Centroid M400 control with 15” LCD w/Industrial PC
*
Conversational Programming and Fanuc G-Code compatible
*
16 Station Carousel ATC
*
10 HP Spindle Motor, BT40 or CAT40 Spindle Taper
*
6,000 rpm spindle speed
*
Delta Axis Motors and drives, Delta Spindle inverter
*
Hardened & Ground Table with Turcite-B coating guide ways
*
Precision Double nut ball screws, hardened & ground for higher accuracy and longer life
*
FC30 Meehanite  Casting Base, Column and Head, annealed and stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Box ways design on Y axis to provide maximum rigidity & stability
*
Telescopic Steel way covers on all three axes
*
Coolant System and air blast system
*
Automatic lubrication system with Low lube alarm
*
Built-in Quartz work light
*
Rigid tapping (opt.)
*
MPG Manual Hand Wheel (opt.)

Feed Rate:
Feed motors on XYZ......................... Delta AC 1 KW Closed Loop
Rapid feed rate :(Delta AC System) X/Y: 250 ipm   Z: 200 ipm
Cutting feed rate............................... 1-200 ipm
Motor:
Spindle motor/max torque................. 10 HP  /  7.5KW
Coolant pump

0.3 HP

Lubrication pump.............................. 150 W
Power requirement 17 KVA,
3 Phase 208-230 voltage
Automatic Tool Changer:
Max. tool weight.............................. 15 lbs. (7 Kg)
Width x Depth x Height (WxDxH):F/E 130” x 90 x 98.5    (3300x2100x2490mm)
Net Weight...................................... 9,600 lbs. (4300 Kg)
Additional information:
Power requirement 14 KVA
3 phase 208 V/230 V max
Air requirements............................... 90 - 100 psi
Type of oil for Way oil/
oil chiller/ pneumatic oil.
Mobil Vactra #2/
Shell Tellus 32/ Air tool oil
Coolant capacity.............................. 26 gallons
Machine Specifications:
Table size........................................ 18.8" x 48.8" (470x1240 mm)
Longitudinal travel (X axis) 41.7” (1060 mm)
Cross travel (Y axis)........................ 22” (560 mm)
Vertical travel ( Z axis) 24” (610 mm)
Spindle nose to table top (D)............. 4.8”-28.9” (123-733 mm)
Spindle C/L to Column 23.6” (600 mm)
Load capacity.................................. 2000 lbs. (910 Kg)
Spindle taper CAT-40 or NMTB-40
Spindle speeds ............................... 6000 RPM
Spindle center to column front surface 23.6” (600 mm)
Transmission of spindle & motor........ Belt
Spindle Tooling Packages 40 Taper, collet or Standard inch size holders


Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems


Standard Accessories
M400W Industrial PC 4th Axis Software Shop floor conversational Programming
Operation manual set Large 15” Color LCD Manual/Programmable Coolant system
Schematic Set Auto lube system (3) USB 2.0 ports & RS-232 Interface
6 GB solid state hard drive Halogen work light Compression Tapping
Cutter Compensation Leveling Bolts & Pads 1 Mb Part Program Size
Subs & Macros Software Full Enclosure (opt.) Toolbox



- Machining Center Model: L800 -

 

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems


 

Machining Center Model: L800 Features

*
Centroid M400W control with 15” LCD w/ Industrial PC
(Fanuc Control Optional)
*
Conversational Programming and Fanuc G-Code compatibility
*
16 Station Carousel ATC
*
10 HP Spindle Motor, BT40 or CAT40 Spindle Taper
*
8,000 rpm spindle speed with spindle oil coolerd
*
Delta Axis Motors and drives, Delta Spindle inverter
*
Hardened & Ground table with Linear Guide ways
*
Precision Double nut ball screws hardened & ground longer life and
for higher accuracy
*
FC30 Meehanite Casting Base, Column and Head, annealed and
stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Telescopic Steel way covers on all three axes
*
Coolant System and air blast system
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (opt.)
*
MPG Manual Hand Wheel (opt.)      
* Fanuc Control Optional
Feed Rate:
Rapid feed rate................................ X/Y: 550 - Z: 425 ipm
Cutting feed rate 1-450/325 ipm
Feed motors on XYZ........................

Delta AC 1 kW

Motors:
Spindle motor/max torque

10 HP / 50 Ft-Lb.

Coolant pump ................................. 0.3 HP
Lubrication pump 150 W
Power requirement............................ 19 KVA,
3 Phase 208-230 voltage
Automatic Tool Changer:
No. of tools

16

Max. tool diameter............................ 3.5” (90 mm)
Max. tool weight 15 lb. (7 Kg)
Machine Specifications: 
Table size........................................ 18" x 35.4" (460x900 mm)
Longitudinal travel(X axis) 31.5” (800 mm)
Cross travel (Y axis)......................... 20.0” (510 mm)
Vertical travel 24.0" (610 mm)
Spindle nose to table top (D)............. 5.5” –29.8” (122-730 mm)
Spindle C/L to Column 21.7”
Table load capacity 1300 lbs. (600 Kg)
Spindle taper.................................... BT40 or CAT40
Spindle speeds 8000 RPM
Transmission of spindle & motor........ Belt
Spindle center to column front surface 23.1" (585 mm)


Standard Accessories
M400W Industrial PC 4th Axis Software Shop floor conversational Programming
Operation manual set Large 15” Color LCD Manual/Programmable Coolant system
Schematic Set Auto lube system (3) USB 2.0 ports & RS-232 Interface
6 GB solid state hard drive Halogen work light Compression Tapping
Cutter Compensation Leveling Bolts & Pads 1 Mb Part Program Size
Subs & Macros Software Full Enclosure Toolbox



- Machining Center Model: L860 – M860 -

M632


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.


Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Machining Center L860 – M860 Machining Center Features

*
Centroid M400W control with 15” LCD w/ Industrial PC
(Fanuc Control Optional)
*
L Series = Linear Guideways M Series = Box Ways
*
Conversational Programming and Fanuc G-Code compatibility
*
16 Station Carousel ATC
*
15 HP Spindle Motor, BT40 or CAT40 Spindle Taper
*
8,000 rpm spindle speed with spindle oil cooler
*
Delta Axis Motors and drives, Delta Spindle inverter
*
Hardened & Ground table with L-Linear/M-Box Guide ways
*
Precision Double nut ball screws hardened & ground longer life and for
higher accuracy
*
FC30 Meehanite Casting Base, Column and Head, annealed and
stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Telescoping metal way covers on all three axes
*
Coolant System and air blast system
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (opt.)
*
MPG Manual Hand Wheel (opt.)
* Fanuc Control Optional

Feed Rate:  
Rapid feed rate................................ X/Y: 550 - Z: 425 ipm
L Series X/Y 600 Z 450 M Series XY 400 Z 350
Cutting feed rate............................. 1-450/325 ipm
Feed motors on XYZ Delta AC 2 kW
Motor:  
Spindle motor/max torque............... 15 HP / 50 Ft-Lb.
Coolant pump 0.3 HP
Lubrication pump............................

150 W

Power requirement

29 KVA,
3 Phase 208-230 VAC

Motors: 
Spindle motor/max torque................. 25 HP
Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 50 KVA, 3 Phase
208-230 voltage
Automatic Tool Changer:  
No. of tools 24 Station Swing Arm type
Max. tool diameter........................... 4.9”
Max. tool weight 33 lbs
Length X Depth X Height (LxDxH). 175” x 130” x 115
Net Weight 25,600 lbs
Spindle Tooling Packages................. 50 Taper collet or Standard inch size holders
Standard Accessories
M400W Industrial PC 4th Axis Software Shop floor conversational Programming
Operation manual set Large 15” Color LCD Manual/Programmable Coolant system
Schematic Set Auto lube system (3) USB 2.0 ports & RS-232 Interface
6 GB solid state hard drive Halogen work light Compression Tapping
Cutter Compensation Leveling Bolts & Pads 1 Mb Part Program Size
Subs & Macros Software Full Enclosure Toolbox


- Machining Center Model: L1060 – M1100 -
E320

 

 

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.


Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

L1060 - M1100 Machining Center Features

*
Centroid M400W control with 15” LCD w/ Industrial PC
(Fanuc Control Optional)
*
L Series = Linear Guideways M Series = Box Ways
*
Conversational Programming and Fanuc G-Code compatibility
*
20 Station Carousel ATC
*
15 HP Spindle Motor, BT40 or CAT40 Spindle Taper
*
8,000 rpm spindle speed with spindle oil cooler
*
Delta Axis Motors and drives, Delta Spindle inverter
*
Hardened & Ground table with L-Linear/M-Box Guide ways
*
Precision Double nut ball screws hardened & ground longer life and for
higher accuracy
*
FC30 Meehanite Casting Base, Column and Head, annealed and stress
relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Telescoping metal way covers on all three axes
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (opt.)
*
MPG Manual Hand Wheel (opt.)
*
Standard Full Enclosure and Chip Auger
* Fanuc Control Optional

Feed Rate:

Rapid feed rate................................. X/Y: 550 - Z: 425 ipm
L Series X/Y 600 Z 450 M Series XY 350 Z 315
Cutting feed rate 1-450/325 1-300/295 ipm
Feed motors on XYZ........................ Delta AC 3 kW

Motor:

Spindle motor/max torque................. 15 HP / 50 Ft-Lb.
Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 32 KVA,
3 Phase 208-230 VAC

Automatic Tool Changer:

No. of tools...................................... 20
Max. tool diameter 3.5” (90 mm)
Max. tool weight.............................. 15 lb (7 kg)
Machine Specifications:  L M
Table size................................ 20” x 49” 24” x 50”
Longitudinal travel (X axis) 41.7” (1059 mm) 43.3” (1099 mm)
Cross travel (Y axis)................. 24” (619 mm) 24” (619 mm)
Vertical travel 26.7” (678 mm) 27.5” (698 mm)
Spindle nose to table top (D)............. 5.5”-32.2”
Spindle C/L to Column 21.7
Load capacity.................................. 1550 lbs. 2250
Spindle taper BT40 or CAT40
Spindle speeds......................... 8000 RPM
Transmission of spindle & motor Belt
Spindle center to column front surface 23.2” (590 mm)
Area................................................ 145 x 105 x 116”
Weight 14,350 lbs

 

Standard Accessories
M400W Industrial PC 4th Axis Software Shop floor conversational Programming
Operation manual set Large 15” Color LCD Manual/Programmable Coolant system
Schematic Set Auto lube system (3) USB 2.0 ports & RS-232 Interface
6 GB solid state hard drive Halogen work light Compression Tapping
Cutter Compensation Leveling Bolts & Pads 1 Mb Part Program Size
Subs & Macros Software Full Enclosure Toolbox


- Machining Center Model: M1320 CAT 40-50 -
E320

 

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.


Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

Table Work-holding options:

System 3R - Kurt – Sunspot
and many other standard systems

M1320 CAT 40-50 Machining Center Features

*
Centroid M400W control with 15” LCD w/ Industrial PC
(Fanuc Control Optional)
*
M Series = Box Ways
*
Conversational Programming and Fanuc G-Code compatibility
*
20 Station Carousel ATC
*
20/25 HP Spindle Motor, CAT40 or CAT50 Spindle Taper
*
8,000/6000 rpm spindle speed with spindle oil cooler
*
Delta Axis Motors and drives, Delta Spindle inverter
*
Hardened & Ground table with L-Linear/M-Box Guide ways
*
Precision Double nut ball screws hardened & ground longer life and for
higher accuracy
*
FC30 Meehanite Casting Base, Column and Head, annealed and stress
relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Telescoping metal way covers on all three axes
*
Coolant System and air blast system
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work light
*
Rigid tapping (opt.)
*
MPG Manual Hand Wheel (opt.)
*
Standard Full Enclosure and Chip Auger

Feed Rate:
Rapid feed rate................................. X/Y: 400 - Z: 350 ipm
L Series X/Y 350 Z 315 M Series XY 300 Z 300
Cutting feed rate 1-350/305 1-285/285 ipm
Feed motors on XYZ......................... Delta AC 4 kW

Motor:

Spindle motor/max torque................. 15 HP / 50 Ft-Lb.
Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 48 KVA,
3 Phase 208-230 VAC

Automatic Tool Changer:

No. of tools 20
Max. tool diameter............................ 3.5” (90 mm)
Max. tool weight 15 lb. (7 Kg)
Machine Specifications:
Table size................................................ 28” x 59”
Longitudinal travel (X axis) 52”
Cross travel(Y axis)................................... 27.5”
Vertical travel 27.5”
Spindle nose to table top (D)...................... 5.5”-32.2”
Spindle C/L to Column 21.7
Load capacity........................................... 1550 lbs. 3250
Spindle taper CAT40 CAT50
Spindle speeds......................................... 8000 6000 RPM
Transmission of spindle & motor Belt
Spindle center to column front surface......... 23.2” (590 mm)
Area 155 x 115 x 116”
Weight..................................................... 18,750 lbs.
Standard Accessories
M400W Industrial PC 4th Axis Software Shop floor conversational Programming
Operation manual set Large 15” Color LCD Manual/Programmable Coolant system
Schematic Set Auto lube system (3) USB 2.0 ports & RS-232 Interface
6 GB solid state hard drive Halogen work light Compression Tapping
Cutter Compensation Leveling Bolts & Pads 1 Mb Part Program Size
Subs & Macros Software Full Enclosure Toolbox


- Machining Center Model:M1600 & M1600L -
(Long Y travel)
M320

 

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.


Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.


Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Machining Center Model: M1600 Features

*
Centroid M400W control with 15” LCD w/Industrial PC
*
Conversational Programming and Fanuc G-Code compatibility
*
24 Station Carousel ATC
*
25 HP Spindle Motor, BT50 or CAT50 Spindle Taper
*
100% Laser Tested Positioning Accuracy
*
25HP Spindle motor
*
70 - 4500 RPM Programmable high torque spindle
*
Precision APEC Class 7 spindle bearings to insure run out is less
than 0.0002”
*
CAT-50 or NMTB-50 taper tooling
*
Watertight limit switches on all axes
*
C3 Double Nut Precision Ground Ball Screws
*
Telescopic Steel way covers on all three axes
*
Automatic lubrication system w/low lube alarm and air blast nozzle
*
Automatic lubrication system with Low Lube alarm
*
Tool box and touch up paint.
*
Programmable coolant system.
Specifications M-1600 M-1600L
Table size................................ 28” x 71” 31.4” x 71”
Longitudinal travel (X axis) 63” 63”
Cross travel (Y axis)................. 31.5” 39.3”
Vertical travel (Z-axis) 31.5 31.5
Spindle to table....................... 6.7-38.1  
Spindle center to column 33.8 41.7
Load capacity.................................. 5500 lbs.
Spindle taper

BT50 or CAT50

Spindle Speed.................................

4500 rpm

Transmission of spindle & motor

Belt

Feed Rate:
Feed motors on XYZ.........................

Delta AC 5KW Closed Loop

Rapid feed rate: (Delta 5kw System) X/Y: 355 Z: 325 ipm
Cutting feed rate............................... 1-350 ipm
Motors:
Spindle motor/max torque................. 25 HP
Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 48 KVA,
3 Phase 208-230 voltage
Automatic Tool Changer:
No. of tools 24 Station Swing Arm type
Max. tool diameter........................... 4.9”
Max. tool weight 33 lbs.
Length X Depth X Height (LxDxH)....... 185” x 130” x 125
Net Weight 30,800 lbs.
Spindle Tooling Packages................. 50 Taper, Collet or Standard inch size holders


Standard Accessories
M400W Industrial PC 4th Axis Software Shop floor conversational Programming
AC Liquid Spindle Chiller 24 Pos. Swing Arm ATC Screw type Chip Auger
Operation manual set Large 15” Color LCD Manual/Programmable Coolant system
Schematic Set Auto lube system (3) USB 2.0 ports & RS-232 Interface
6 GB solid state hard drive Halogen work light Compression Tapping
Cutter Compensation Leveling Bolts & Pads 1 Mb Part Program Size
Subs & Macros Software Full Enclosure Toolbox


- Machining Center Model:BM-600H Machine -

M320

 

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.




Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Machining Center Model: BM600H Features

*
Centroid M400W control with 15” LCD w/Industrial PC
*
H= Rigid head and 8,000 RPM (Optional ATC)
*
AC Delta Axis Motors and drives, Delta Spindle inverter
*
15 HP Spindle Motor, CAT40-BT40 Spindle Taper
*
Programmable spindle speeds
*
Hardened & Ground Table with Turcite-B coating on all machine ways
*
Precision Double nut ball screws, hardened and ground for longer life,
higher accuracy and better repeatability
*
FC30 Meehanite Casting Base, Column and Head; annealed and stress
relieved for long term stability and reliability
*
100% Laser tested providing positioning accuracy & repeatability
*
Box way design on the Y  & Z axes to provide maximum rigidity
and stability
*
Optional TCG or FE with metal telescoping way covers
*
Programmable Coolant system
*
Automatic lubrication system with Low Lube alarm
*
Built in Quartz Work Lamp
*
MPG Manual Hand box with axis and speed controls (opt.)
Machine Specifications: 
Table size............................................. 17.7” x 71” Table has (3) "T" slots
Longitudinal travel (X axis) 59”
Cross travel (Y axis)............................. 24.4”
Vertical travel (Z-axis) 23.6”
Spindle nose to table top (D).................. .4.7”~28.3”
Spindle center to column front surface 25.5”
Load capacity....................................... 2200 lbs.
Spindle taper BT40 or CAT40
Transmission of spindle & motor Belt
Spindle Inverter brand Delta
   
Automatic Tool Changer H=16 Station Umbrella
Standard Push button tool Release T model None
ATC - Easy tool release
Head swivel (Right/ Left) H=Fixed
Feed Rate:
Rapid feed rate................................. X/Y: 250 ipm Z: 220 ipm
Cutting feed rate 1-220 ipm
Feed motors on XYZ......................... Delta AC Motors & Drives
Axis Motor Size XYZ = 2.0 kW
Motors:
Spindle motor/max torque................. 15 HP
Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 20 KVA,
3 Phase 208-230 voltage
General:
Area requirement...................................

175 x 90 x 110H

Weight 9,500 lbs
Air Required......................................... Yes


Standard Accessories
M400W Industrial PC Large 15” Color LCD Shop floor conversational Programming
Operation manual set Auto lube system Manual/Programmable Coolant system
Schematic Set Halogen work light (3) USB 2.0 ports & RS-232 Interface
Toolbox Leveling Bolts & Pads 6 GB solid state hard drive
1 Mb Part Program Size Compression Tapping Cutter Compensation
4th Axis Software  


Digitizer Probe



Optional 4th Axis Table

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
Dealer Map


Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Check out all of the Tooling Package choices we offer for your New Remedy Machine.

  Mill Tooling Packages  


- Machining Center Model:BM-630H Machine -

M320

 

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.




Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Machining Center Model: BM630H Features

*
Centroid M400W control with 15” LCD w/Industrial PC
*
H= Rigid head and 8,000 RPM (Optional ATC)
*
AC Delta Axis Motors and drives, Delta Spindle inverter
*
15 HP Spindle Motor, CAT40-BT40 Spindle Taper
*
Programmable spindle speeds
*
Hardened & Ground Table with Turcite-B coating on all machine ways
*
Precision Double nut ball screws, hardened and ground for longer life,
higher accuracy and better repeatability
*
FC30 Meehanite Casting Base, Column and Head; annealed and stress
relieved for long term stability and reliability
*
100% Laser tested providing positioning accuracy & repeatability
*
Box way design on the Y  & Z axes to provide maximum rigidity
and stability
*
Optional TCG or FE with metal telescoping way covers
*
Programmable Coolant system
*
Automatic lubrication system with Low Lube alarm
*
Built in Quartz Work Lamp
*
MPG Manual Hand box with axis and speed controls (opt.)
Machine Specifications: 
Table size............................................. 24” x 73” Table has (4) "T" slots
Longitudinal travel (X axis) 59”
Cross travel (Y axis)............................. 33.5”
Vertical travel (Z-axis) 28”
Spindle nose to table top (D).................. .4.7”~28.3”
Spindle center to column front surface 25.5”
Load capacity....................................... 3300 lbs.
Spindle taper BT40 or CAT40
Transmission of spindle & motor Belt
Spindle Inverter brand Delta
   
Automatic Tool Changer…(Optional) H=16 Station Umbrella
Standard Push button tool Release T model None
ATC - Easy tool release
Head swivel (Right/ Left) H=Fixed
Feed Rate:
Rapid feed rate................................. X/Y: 240 ipm Z: 220 ipm
Cutting feed rate 1-220 ipm
Feed motors on XYZ......................... Delta AC Motors & Drives
Axis Motor Size XYZ = 2.0 kW
Motors:
Spindle motor HP Rating.................. H-15 HP
Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 20 KVA,
3 Phase 208-230 voltage
General:
Area requirement..............................

175 x 90 x 110H

Weight 11,500 lbs
Air Required..................................... Yes


Standard Accessories
M400W Industrial PC Large 15” Color LCD Shop floor conversational Programming
Operation manual set Auto lube system Manual/Programmable Coolant system
Schematic Set Halogen work light (3) USB 2.0 ports & RS-232 Interface
Toolbox Leveling Bolts & Pads 6 GB solid state hard drive
1 Mb Part Program Size Compression Tapping Cutter Compensation
4th Axis Software  


Digitizer Probe



Optional 4th Axis Table

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
Dealer Map


Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Check out all of the Tooling Package choices we offer for your New Remedy Machine.

  Mill Tooling Packages  


- Machining Center Model:BM-660H Machine -

M320

 

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.




Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Machining Center Model: BM660H Features

*
Centroid M400W control with 15” LCD w/Industrial PC
*
H= Rigid head and 8,000 RPM (Optional ATC)
*
AC Delta Axis Motors and drives, Delta Spindle inverter
*
15 HP Spindle Motor, CAT40-BT40 Spindle Taper
*
Programmable spindle speeds
*
Hardened & Ground Table with Turcite-B coating on all machine ways
*
Precision Double nut ball screws, hardened and ground for longer life,
higher accuracy and better repeatability
*
FC30 Meehanite Casting Base, Column and Head; annealed and stress
relieved for long term stability and reliability
*
100% Laser tested providing positioning accuracy & repeatability
*
Box way design on the Y  & Z axes to provide maximum rigidity
and stability
*
Optional TCG or FE with metal telescoping way covers
*
Programmable Coolant system
*
Automatic lubrication system with Low Lube alarm
*
Built in Quartz Work Lamp
*
MPG Manual Hand box with axis and speed controls (opt.)
Machine Specifications: 
Table size (Hardened and Ground)............... 29.9” x 72” Table has (3) "T" slots
Longitudinal travel (X axis) 66.9”
Cross travel (Y axis)............................. 33.4”
Vertical travel (Z-axis) 27.5”
Spindle nose to table top (D).................. .4.7”~33.4”
Spindle center to column front surface 25.5”
Load capacity....................................... 3300 lbs.
Spindle taper BT40 or CAT40
Spindle Speed (rpm)............................. See above
Transmission of spindle & motor Belt
Spindle Inverter brand............................ Delta
   
Automatic Tool Changer…(Optional) T=Not available
H=16 Station Umbrella
Standard Push button tool Release T model None
ATC - Easy tool release
Head swivel (Right/ Left) T=Yes
H=Fixed
Feed Rate:
Rapid feed rate................................. X/Y: 240 ipm Z: 220 ipm
Cutting feed rate 1-220 ipm
Feed motors on XYZ......................... Delta AC Motors & Drives
Axis Motor Size XYZ = 2.0 kW
Motors:
Spindle motor HP Rating.................. 15 HP
Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 25/30 KVA,
3 Phase 208-230 voltage
General:
Area requirement..............................

190 x 125 x 120H

Weight 18,700 lbs
Air Required..................................... Yes


Standard Accessories
M400W Industrial PC Large 15” Color LCD Shop floor conversational Programming
Operation manual set Auto lube system Manual/Programmable Coolant system
Schematic Set Halogen work light (3) USB 2.0 ports & RS-232 Interface
Toolbox Leveling Bolts & Pads 6 GB solid state hard drive
1 Mb Part Program Size Compression Tapping Cutter Compensation
4th Axis Software  


Digitizer Probe



Optional 4th Axis Table

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
Dealer Map


Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Check out all of the Tooling Package choices we offer for your New Remedy Machine.

  Mill Tooling Packages  


- Machining Center Model:BM-760H Machine -

M320

 

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.




Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Machining Center Model: BM760H Features

*
Centroid M400W control with 15” LCD w/Industrial PC
*
H= Rigid head and 8,000 RPM (Optional ATC)
*
AC Delta Axis Motors and drives, Delta Spindle inverter
*
20 HP Spindle Motor, CAT40-BT40 Spindle Taper
*
Programmable spindle speeds
*
Hardened & Ground Table with Turcite-B coating on all machine ways
*
Precision Double nut ball screws, hardened and ground for longer life,
higher accuracy and better repeatability
*
FC30 Meehanite Casting Base, Column and Head; annealed and stress
relieved for long term stability and reliability
*
100% Laser tested providing positioning accuracy & repeatability
*
Box way design on the Y  & Z axes to provide maximum rigidity
and stability
*
Optional TCG or FE with metal telescoping way covers
*
Programmable Coolant system
*
Automatic lubrication system with Low Lube alarm
*
Built in Quartz Work Lamp
*
MPG Manual Hand box with axis and speed controls (opt.)
 
Machine Specifications: 
Table size (Hardened and Ground)............... 32” x 86” Table has (5) "T" slots
Longitudinal travel (X axis) 78.5”
Cross travel (Y axis)............................. 33”
Vertical travel (Z-axis) 27.5”
Spindle nose to table top (D).................. 3.9”~31.4”
Spindle center to column front surface 35.4”
Load capacity....................................... 4400 lbs.
Spindle taper BT40 or CAT40
Spindle Speed (rpm)............................. 80-8000
Transmission of spindle & motor Belt
Spindle Inverter brand............................ Delta
   
Automatic Tool Changer…(Optional) H=20 Station Umbrella
Standard Push button tool Release T model None
ATC - Easy tool release
Head swivel (Right/ Left) T=Yes
H=Fixed
Feed Rate:
Rapid feed rate................................. X/Y: 250 ipm Z: 240 ipm
Cutting feed rate 1-225 ipm
Feed motors on XYZ......................... Delta AC Motors & Drives
Axis Motor Size XYZ = 3.0 kW
Motors:
Spindle motor HP Rating.................. 20 HP
Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 30 KVA,
3 Phase 208-230 voltage
General:
Area requirement..............................

175 x 105 x 110H

Weight 17,500 lbs
Air Required..................................... Yes


Standard Accessories
M400W Industrial PC Large 15” Color LCD Shop floor conversational Programming
Operation manual set Auto lube system Manual/Programmable Coolant system
Schematic Set Halogen work light (3) USB 2.0 ports & RS-232 Interface
Toolbox Leveling Bolts & Pads 6 GB solid state hard drive
1 Mb Part Program Size Compression Tapping Cutter Compensation
4th Axis Software  


Digitizer Probe



Optional 4th Axis Table

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
Dealer Map


Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Check out all of the Tooling Package choices we offer for your New Remedy Machine.

  Mill Tooling Packages  


- Machining Center Model:BM-780H Machine -

 

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.




Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Machining Center Model: BM780H Features

*
Centroid M400W control with 15” LCD w/Industrial PC
*
H= Rigid head with 60-6,000 RPM
*
20 Station Carousel ATC
*
AC Delta Axis Motors and drives, Delta Spindle inverter
*
20 HP Spindle Motor, CAT40-BT40 Spindle Taper
*
Programmable spindle speeds
*
Hardened & Ground Table with Turcite-B coating on all machine ways
*
Precision Double nut ball screws, hardened and ground for longer life,
higher accuracy and better repeatability
*
FC30 Meehanite Casting Base, Column and Head; annealed and stress
relieved for long term stability and reliability
*
100% Laser tested providing positioning accuracy & repeatability
*
Box way design on the Y  & Z axes to provide maximum rigidity
and stability
*
Optional TCG or FE with metal telescoping way covers
*
Programmable Coolant system
*
Automatic lubrication system with Low Lube alarm
*
Built in Quartz Work Lamp
*
MPG Manual Hand box with axis and speed controls (opt.)
 
Machine Specifications: 
Table size (Hardened and Ground)............... 32” x 108” Table has (5) "T" slots
Longitudinal travel (X axis) 98”
Cross travel (Y axis)............................. 33”
Vertical travel (Z-axis) 27.5”
Spindle nose to table top (D).................. 3.9”~31.4”
Spindle center to column front surface 35.4”
Load capacity....................................... 4400 lbs.
Spindle taper BT40 or CAT40
Spindle Speed (rpm)............................. 60-6000
Transmission of spindle & motor Belt
Spindle Inverter brand............................ Delta
   
Automatic Tool Changer….................. 20 Station Umbrella
Standard Push button tool Release Easy tool release
Head swivel (Right/ Left) H=Fixed
Feed Rate:
Rapid feed rate................................. X/Y: 300 ipm Z: 240 ipm
Cutting feed rate 1-225 ipm
Feed motors on XYZ......................... Delta AC Motors & Drives
Axis Motor Size XYZ = 3.0 kW
Motors:
Spindle motor HP Rating.................. 20 HP
Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 30 KVA,
3 Phase 208-230 voltage
General:
Area requirement..............................

200 x 185 x 120H

Weight 22,500 lbs
Air Required..................................... Yes


Standard Accessories
M400W Industrial PC Large 15” Color LCD Shop floor conversational Programming
Operation manual set Auto lube system Manual/Programmable Coolant system
Schematic Set Halogen work light (3) USB 2.0 ports & RS-232 Interface
Toolbox Leveling Bolts & Pads 6 GB solid state hard drive
1 Mb Part Program Size Compression Tapping Cutter Compensation
4th Axis Software  


Digitizer Probe



Optional 4th Axis Table

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
Dealer Map


Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Check out all of the Tooling Package choices we offer for your New Remedy Machine.

  Mill Tooling Packages  


- Machining Center Model:BM-880H Machine -

 

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.




Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Machining Center Model: BM880H Features

*
Centroid M400W control with 15” LCD w/Industrial PC
*
H= Rigid head with 60-6,000 RPM
*
20 Station Carousel ATC
*
AC Delta Axis Motors and drives, Delta Spindle inverter
*
20 HP Spindle Motor, CAT40-BT40 Spindle Taper
*
Programmable spindle speeds
*
Hardened & Ground Table with Turcite-B coating on all machine ways
*
Precision Double nut ball screws, hardened and ground for longer life,
higher accuracy and better repeatability
*
FC30 Meehanite Casting Base, Column and Head; annealed and stress
relieved for long term stability and reliability
*
100% Laser tested providing positioning accuracy & repeatability
*
Box way design on the Y  & Z axes to provide maximum rigidity
and stability
*
Optional TCG or FE with metal telescoping way covers
*
Programmable Coolant system
*
Automatic lubrication system with Low Lube alarm
*
Built in Quartz Work Lamp
*
MPG Manual Hand box with axis and speed controls (opt.)
Machine Specifications: 
Table size (Hardened and Ground)............... 32” x 126” Table has (7) "T" slots
Longitudinal travel (X axis) 118”
Cross travel (Y axis)............................. 35.4”
Vertical travel (Z-axis) 29.5”
Spindle nose to table top (D).................. 3.9”~31.4”
Spindle center to column front surface 25.5”
Load capacity....................................... 4850 lbs.
Spindle taper BT40 or CAT40
Spindle Speed (rpm)............................. 60-6000
Transmission of spindle & motor Belt
Spindle Inverter brand............................ Delta
   
Automatic Tool Changer….................. 20 Station Carousel
Standard Push button tool Release Easy tool release
Head swivel (Right/ Left) H=Fixed
Feed Rate:
Rapid feed rate................................. X/Y: 300 ipm Z: 240 ipm
Cutting feed rate 1-225 ipm
Feed motors on XYZ......................... Delta AC Motors & Drives
Axis Motor Size XYZ = 3.0 kW
Motors:
Spindle motor HP Rating.................. 20 HP
Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 35 KVA,
3 Phase 208-230 voltage
General:
Area requirement..............................

240 x 185 x 120H

Weight 32,500 lbs.
Air Required..................................... Yes


Standard Accessories
M400W Industrial PC Large 15” Color LCD Shop floor conversational Programming
Operation manual set Auto lube system Manual/Programmable Coolant system
Schematic Set Halogen work light (3) USB 2.0 ports & RS-232 Interface
Toolbox Leveling Bolts & Pads 6 GB solid state hard drive
1 Mb Part Program Size Compression Tapping Cutter Compensation
4th Axis Software  


Digitizer Probe



Optional 4th Axis Table

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
Dealer Map


Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Check out all of the Tooling Package choices we offer for your New Remedy Machine.

  Mill Tooling Packages  


Email Remedy Machine Sales, LLC Bruce Tollefson Tom Khoury Roger Gold & Chris Perseo Bavid Belding