Remedy Machine Sales, LLC

Email Remedy Machine Sales, LLC East Coast EDM Machinery Find A Dealer Near You

- Remedy D1420 Double Column Machining Center -


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.


Fanuc Control (Fanuc Oi-Series)
- D1420 Double Column machine is built with a complete Fanuc Control system. The complete Fanuc CNC Control includes: All Fanuc electrical cabinetry, all of the electronics and wiring , the drive systems, all 4 axis motors, the spindle motor and inverter. Fanuc servo technology is well known as the world standard achieving both extreme accuracy and ultra-smooth operation. Fanuc controls have been the world standard for many years and most every cam system outputs Fanuc Code. Closed Loop, Nano pulse motors are todays state of the art. These Fanuc water tight motors improve machine positioning along with the Fanuc HRV servo system. The Fanuc spindle motor controller, controls the spindle start up and increases torque throughout its operational range. Standard PC/DNC network functions and direct program edit functions at the machine control. The control has a 10” or get the 15” color LCD screen. Fanuc control- ease of use is world recognized and it is ISO conforming. Customizable functions, operation menu’s, diagnostic functions, power failure protection, parameter tuning are of course standard.
Check out the Fanuc Website for more details @ www.Fanuc/Japan.com or www.Fanuc.com


Fanuc Control

 

Remedy D1420 Double Column
Machining Center
Features

*
Fanuc Oi-MB Control
*
24 Station swing arm ATC
*
ISO 9001 Quality assurance
*
FC30 Meehanite cast bed mill frame annealed
and stress relieved
*
47” x 85” Hardened & ground table
*
Linear Ways on the all Axes
*
100% Laser Tested Positioning Accuracy
*
20 HP Spindle motor
*
70 - 4000 RPM high torque spindle
*
Liquid Spindle Chiller
*
Precision APEC Class 7 spindle bearings to
insure run out is less than 0.0002"
*
BT-50 or Cat-50 taper tooling
*
Watertight limit switches on all axes
*
C3 Double Nut Precision Ground Ball Screws
*
Telescoping metal way covers on all three axes
*
Hi Pressure lubrication system w/low lube alarm
and air blast nozzle.
*
Tool box and touch up paint
*
Programmable coolant system

 

Axis Motors:
Rapid feed rate............................. 600 ipm
Cutting feed rate 1-400 ipm
Axis servo motors…(XYZ).............. 9 / 6 / 7 KW AC (XYZ)

Motors:

Spindle motor/max torque............. 20 HP 20KW (Std.)
Programmable spindle speeds 10-4500 RPM
KVA rating................................... 80 KVA
Coolant pump 1/5 HP
Lubrication system....................... Automatic High pressure w/low Lube alarm
Power requirements 208-230 VAC 3 Ph.
Area (LxWxH).............................. 190” x 100 ” x 130”
Machine weight 61,000 lbs
Air requirements........................... 4 cfm @ 90 psi
Way oil Mobil Vactra #2 /
Shell Tellus 32 / Air tool oil
Coolant capacity.......................... 46 Gallons

Specifications: 
Table size................................ 70” x 78.75” (1800x2000 mm)
Longitudinal travel (X axis) 86” (2200 mm)
Cross travel (Y axis).................. 70” (2000 mm)
Z axis head vertical travel 39”
Spindle nose to table top (D)...... 5.3”-44.3”
(135-1,125 mm)
Load capacity 11,000 lbs. (545 Kg)
Spindle taper............................ BT50.
Spindle speeds 60-4500 rpm
Transmission of spindle & motor. Belt
Distance between Columns 80.0” (2000 mm)


Table Work-holding Options:

- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems


The Massive Y axis Head

Standard Accessories
Fanuc Control on swing arm Color LCD Double Screw type Chip Augers
AC Liquid Spindle Chiller 24 Pos. Swing Arm ATC Manual/Programmable Coolant system
Operation manual set Super Auto lube system Rigid Tapping
Schematic Set Halogen work light Toolbox
Full Enclosure Leveling Bolts & Pads  

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
  Dealer Map
Note: Because of the massive size of the double column machines, special items need to be considered. These include: Heavy duty rigging and transportation, your floor capacity, our installation team. Our Pre installation visit is included in our pricing.

Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Request a Quote today!

Request a meeting with us!
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages  


- Remedy D1703 Double Column Machining Center -


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Fanuc Control (Fanuc Oi-Series) -
D1703 Double Column machine is built with a complete Fanuc Control system. The complete Fanuc CNC Control includes: All Fanuc electrical cabinetry, all of the electronics and wiring , the drive systems, all 4 axis motors, the spindle motor and inverter. Fanuc servo technology is well known as the world standard achieving both extreme accuracy and ultra-smooth operation. Fanuc controls have been the world standard for many years and most every cam system outputs Fanuc Code. Closed Loop, Nano pulse motors are todays state of the art. These Fanuc water tight motors improve machine positioning along with the Fanuc HRV servo system. The Fanuc spindle motor controller, controls the spindle start up and increases torque throughout its operational range. Standard PC/DNC network functions and direct program edit functions at the machine control. The control has a 10” or get the 15” color LCD screen. Fanuc control- ease of use is world recognized and it is ISO conforming. Customizable functions, operation menu’s, diagnostic functions, power failure protection, parameter tuning are of course standard.
Check out the Fanuc Website for more details @ www.Fanuc/Japan.com or www.Fanuc.com


Fanuc Control

Remedy D1703 Double Column
Machining Center Features

*
Fanuc Oi-MB Control
*
32 Station swing arm ATC
*
ISO 9001 Quality assurance
*
FC30 Meehanite cast bed mill frame annealed
and stress relieved
*
59” x 118” Hardened & ground table
*
Linear Ways on the all Axes
*
100% Laser Tested Positioning Accuracy
*
20 HP Spindle motor
*
60 - 4500 RPM high torque spindle
*
Liquid Spindle Chiller
*
Precision APEC Class 7 spindle bearings to
insure run out is less than 0.0002"
*
BT-50 or Cat-50 taper tooling
*
Watertight limit switches on all axes
*
C3 Double Nut Precision Ground Ball Screws
*
Telescoping metal way covers on all three axes
*
Hi Pressure lubrication system w/low lube
alarm and air blast nozzle.
*
Tool box and touch up paint
*
Programmable coolant system


Table Work-holding Options:

- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Axis Motors:
Rapid feed rate............................. 475 ipm
Cutting feed rate 1-300 ipm
Axis servo motors…(XYZ).............. 7 / 7 / 7 KW AC (XYZ)

Motors:

Spindle motor/max torque............. 20 HP 20KW (Std.)
Programmable spindle speeds 10-4500 RPM
KVA rating................................... 80 KVA
Coolant pump 1/5 HP
Lubrication system....................... Automatic High pressure w/low Lube alarm
Power requirements 208-230 VAC 3 Ph.
Area (LxWxH).............................. 190” x 100 ” x 130”
Machine weight 72,000 lbs.
Air requirements........................... 4 cfm @ 90 psi
Way oil Mobil Vactra #2
Coolant capacity.......................... 62 Gallons
Machine Specifications: 
Table size..................................... 59” x 118”
Longitudinal travel (X axis) 118”
Cross travel (Y axis)...................... 63”
Z axis head vertical travel 39”
Distance between columns............ 55"
Spindle nose to table top 8.3” – 40.6”
Transmission of power to the spindle Gear head
Table “T” Slots 7
Table load capacity........................ 18,000 lbs
Spindle taper CAT or BT-50
Spindle speeds (RPM).................... 60 – 4500
w/Spindle chiller
Automatic tool changer 32 Pos. swing arm enclosed
Tool max. (dia/weight/length)........... 4.9” / 39 lbs. / 13.7”
ATC Time 8 seconds

 

Standard Features
Manual Set AC Spindle Coolant System Nitrogen counter balance system
Auto power down Circuit Diagrams Crawler conveyor to chip bucket
Full Guarding Electronic Hand wheels Program Indicator lamps
Screw Type Chip Conveyor on both sides of the Table Optional: Manual 90 degree angle milling head
 

Standard Accessories
Fanuc Control on swing arm Color LCD Double Screw type Chip Augers
AC Liquid Spindle Chiller 24 Pos. Swing Arm ATC Manual/Programmable Coolant system
Operation manual set Super Auto lube system Rigid Tapping
Schematic Set Halogen work light Toolbox
Full Enclosure Leveling Bolts & Pads  




The Massive Y axis Head

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
  Dealer Map
Note: Because of the massive size of the double column machines, special items need to be considered. These include: Heavy duty rigging and transportation, your floor capacity, our installation team. Our Pre installation visit is included in our pricing.

Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Request a Quote today!

Request a meeting with us!
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages  


Y axis Fanuc Motor, and C-weight tank




Built in ladder to the machine head, spindle chiller
and gas power tank for the Z counter weight


Liquid AC spindle chiller is near the spindle
for temperature stability


- Remedy D2203 Double Column Machining Center-



Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP




Fanuc Control




Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Remedy D2203 Double Column Machining Center Features

*
Fanuc Oi-MB Control
*
32 Station swing arm ATC
*
ISO 9001 Quality assurance
*
FC30 Meehanite cast bed mill frame annealed and stress relieved
*
70” x 118” Hardened & ground table
*
Linear Ways on the all Axes
*
100% Laser Tested Positioning Accuracy
*
30 HP Spindle motor
*
60 - 4500 RPM high torque spindle
*
Liquid Spindle Chiller
*
Precision APEC Class 7 spindle bearings to insure run
out is less than 0.0002"
*
BT-50 or Cat-50 taper tooling
*
Watertight limit switches on all axes
*
C3 Double Nut Precision Ground Ball Screws
*
Telescoping metal way covers on all three axes
*
Hi Pressure lubrication system w/low lube alarm and air blast nozzle.
*
Tool box and touch up paint
*
Programmable coolant system

 

Fanuc Control (Fanuc Oi-Series) -
D2203 Double Column machine is built with a complete Fanuc Control system. The complete Fanuc CNC Control includes: All Fanuc electrical cabinetry, all of the electronics and wiring , the drive systems, all 4 axis motors, the spindle motor and inverter. Fanuc servo technology is well known as the world standard achieving both extreme accuracy and ultra-smooth operation. Fanuc controls have been the world standard for many years and most every cam system outputs Fanuc Code. Closed Loop, Nano pulse motors are todays state of the art. These Fanuc water tight motors improve machine positioning along with the Fanuc HRV servo system. The Fanuc spindle motor controller, controls the spindle start up and increases torque throughout its operational range. Standard PC/DNC network functions and direct program edit functions at the machine control. The control has a 10” or get the 15” color LCD screen. Fanuc control- ease of use is world recognized and it is ISO conforming. Customizable functions, operation menu’s, diagnostic functions, power failure protection, parameter tuning are of course standard.
Check out the Fanuc Website for more details @ www.Fanuc/Japan.com or www.Fanuc.com

End view machining a 3D Part

Chip auger screens

Axis Motors:
Rapid feed rate............................. 475 ipm
Cutting feed rate 1-300 ipm
Axis servo motors…(XYZ).............. 7 / 7 / 7 KW AC (XYZ)

Motors:

Spindle motor/max torque............. 30 HP 20KW (Std.)
Programmable spindle speeds 10-4500 RPM
KVA rating................................... 80 KVA
Coolant pump 1/5 HP
Lubrication system....................... Automatic High pressure w/low Lube alarm
Power requirements 208-230 VAC 3 Ph.
Area (LxWxH).............................. 190” x 100 ” x 130”
Machine weight 72,000 lbs.
Air requirements........................... 4 cfm @ 90 psi
Way oil Mobil Vactra #2 /
Shell Tellus 32 / Air tool oil
Coolant capacity.......................... 62 Gallons
Specifications: 
Table size........................................... 70” x 118”
Longitudinal travel (X axis) 118”
Cross travel (Y axis)............................. 83”
Z axis head vertical travel 39”
Distance between columns................... 87"
Spindle nose to table top 7.8” – 47.2”
Transmission of power to the spindle...... Gear head
Table “T” Slots 9
Table load capacity.............................. 22,000 lbs
Spindle taper CAT or BT-50
Spindle speeds (RPM)......................... 60 – 4500
w/Spindle chiller
Automatic tool changer 32 Pos. swing arm enclosed
Tool max. (dia/weight/length)................ 4.9” / 39 lbs. / 13.7”
ATC Time 8 seconds
Standard Features
Manual Set AC Spindle Coolant System Nitrogen counter balance system
Auto power down Circuit Diagrams Crawler conveyor to chip bucket
Full Guarding Electronic Hand wheels Program Indicator lamps
Screw Type Chip Conveyor on both sides of the Table Optional: Manual 90 degree angle milling head

Standard Accessories
Fanuc Control on swing arm Color LCD Double Screw type Chip Augers
AC Liquid Spindle Chiller 24 Pos. Swing Arm ATC Manual/Programmable Coolant system
Operation manual set Super Auto lube system Rigid Tapping
Schematic Set Halogen work light Toolbox
Full Enclosure Leveling Bolts & Pads  

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
  Dealer Map
Note: Because of the massive size of the double column machines, special items need to be considered. These include: Heavy duty rigging and transportation, your floor capacity, our installation team. Our Pre installation visit is included in our pricing.

Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Request a Quote today!

Request a meeting with us!
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages  


- Remedy D2503 Double Column Machining Center-



Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

 


Fanuc Control

 

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Remedy D2503 Double Column Machining Center Features

*
Fanuc Oi-MB Control
*
32 Station swing arm ATC
*
ISO 9001 Quality assurance
*
FC30 Meehanite cast bed mill frame annealed and stress relieved
*
70” x 118” Hardened & ground table
*
Linear Ways on the all Axes
*
100% Laser Tested Positioning Accuracy
*
30 HP Spindle motor
*
60 - 4500 RPM high torque spindle
*
Liquid Spindle Chiller
*
Precision APEC Class 7 spindle bearings to insure run
out is less than 0.0002"
*
BT-50 or Cat-50 taper tooling
*
Watertight limit switches on all axes
*
C3 Double Nut Precision Ground Ball Screws
*
Telescoping metal way covers on all three axes
*
Hi Pressure lubrication system w/low lube alarm and air blast nozzle.
*
Tool box and touch up paint
*
Programmable coolant system

Fanuc Control (Fanuc Oi-Series) -
D2503 Double Column machine is built with a complete Fanuc Control system. The complete Fanuc CNC Control includes: All Fanuc electrical cabinetry, all of the electronics and wiring , the drive systems, all 4 axis motors, the spindle motor and inverter. Fanuc servo technology is well known as the world standard achieving both extreme accuracy and ultra-smooth operation. Fanuc controls have been the world standard for many years and most every cam system outputs Fanuc Code. Closed Loop, Nano pulse motors are todays state of the art. These Fanuc water tight motors improve machine positioning along with the Fanuc HRV servo system. The Fanuc spindle motor controller, controls the spindle start up and increases torque throughout its operational range. Standard PC/DNC network functions and direct program edit functions at the machine control. The control has a 10” or get the 15” color LCD screen. Fanuc control- ease of use is world recognized and it is ISO conforming. Customizable functions, operation menu’s, diagnostic functions, power failure protection, parameter tuning are of course standard.
Check out the Fanuc Website for more details @ www.Fanuc/Japan.com or www.Fanuc.com


Axis Motors:
Rapid feed rate............................. 475 ipm
Cutting feed rate 1-300 ipm
Axis servo motors…(XYZ).............. 7 / 7 / 7 KW AC (XYZ)

Motors:

Spindle motor/max torque............. 30 HP 20KW (Std.)
Programmable spindle speeds 10-4500 RPM
KVA rating................................... 80 KVA
Coolant pump 1/5 HP
Lubrication system....................... Automatic High pressure w/low Lube alarm
Power requirements 208-230 VAC 3 Ph.
Area (LxWxH).............................. 190” x 100 ” x 130”
Machine weight 95,500 lbs
Air requirements........................... 4 cfm @ 90 psi
Way oil Mobil Vactra #2 /
Shell Tellus 32 / Air tool oil
Coolant capacity.......................... 82 Gallons
Specifications: 
Table size........................................... 86” x 118”
Longitudinal travel (X axis) 118”
Cross travel (Y axis)............................. 102”
Z axis head vertical travel 39”
Distance between columns................... 106"
Spindle nose to table top 7.8” – 47.2”
Transmission of power to the spindle...... Gear head
Table “T” Slots 11
Table load capacity.............................. 22,000 lbs
Spindle taper CAT or BT-50
Spindle speeds (RPM)......................... 60 – 4500
w/Spindle chiller
Automatic tool changer 32 Pos. swing arm enclosed
Number of tools in the ATC .................. 32/40/60
Tool max. ( dia. / weight / length ) 4.9” / 39 lbs. / 13.7”
ATC Time............................................ 8 seconds

 



Standard Features
Manual Set AC Spindle Coolant System Nitrogen counter balance system
Auto power down Circuit Diagrams Crawler conveyor to chip bucket
Full Guarding Electronic Hand wheels Program Indicator lamps
Screw Type Chip Conveyor on both sides of the Table Optional: Manual 90 degree angle milling head

Standard Accessories
Fanuc Control on swing arm Color LCD Double Screw type Chip Augers
AC Liquid Spindle Chiller 24 Pos. Swing Arm ATC Manual/Programmable Coolant system
Operation manual set Super Auto lube system Rigid Tapping
Schematic Set Halogen work light Toolbox
Full Enclosure Leveling Bolts & Pads  

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
  Dealer Map
Note: Because of the massive size of the double column machines, special items need to be considered. These include: Heavy duty rigging and transportation, your floor capacity, our installation team. Our Pre installation visit is included in our pricing.

Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Request a Quote today!

Request a meeting with us!
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages  


- Remedy D2504 Double Column Machining Center-



Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Fanuc Control (Fanuc Oi-Series) -
D2504 Double Column machine is built with a complete Fanuc Control system. The complete Fanuc CNC Control includes: All Fanuc electrical cabinetry, all of the electronics and wiring , the drive systems, all 4 axis motors, the spindle motor and inverter. Fanuc servo technology is well known as the world standard achieving both extreme accuracy and ultra-smooth operation. Fanuc controls have been the world standard for many years and most every cam system outputs Fanuc Code. Closed Loop, Nano pulse motors are todays state of the art. These Fanuc water tight motors improve machine positioning along with the Fanuc HRV servo system. The Fanuc spindle motor controller, controls the spindle start up and increases torque throughout its operational range. Standard PC/DNC network functions and direct program edit functions at the machine control. The control has a 10” or get the 15” color LCD screen. Fanuc control- ease of use is world recognized and it is ISO conforming. Customizable functions, operation menu’s, diagnostic functions, power failure protection, parameter tuning are of course standard.
Check out the Fanuc Website for more details @ www.Fanuc/Japan.com or www.Fanuc.com

 

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Remedy D2504 Double Column
Machining Center Features

*
Fanuc Oi-MB Control
*
32 Station swing arm ATC
*
ISO 9001 Quality assurance
*
FC30 Meehanite cast bed mill frame annealed and stress relieved
*
70” x 118” Hardened & ground table
*
Linear Ways on the all Axes
*
100% Laser Tested Positioning Accuracy
*
30 HP Spindle motor
*
60 - 4500 RPM high torque spindle
*
Liquid Spindle Chiller
*
Precision APEC Class 7 spindle bearings to insure run
out is less than 0.0002"
*
BT-50 or Cat-50 taper tooling
*
Watertight limit switches on all axes
*
C3 Double Nut Precision Ground Ball Screws
*
Telescoping metal way covers on all three axes
*
Hi Pressure lubrication system w/low lube alarm and air blast nozzle.
*
Tool box and touch up paint
*
Programmable coolant system



Axis Motors:
Rapid feed rate............................. 475 ipm
Cutting feed rate 1-300 ipm
Axis servo motors…(XYZ).............. 7 / 7 / 7 KW AC (XYZ)

Motors:

Spindle motor/max torque............. 30 HP 20KW (Std.)
Programmable spindle speeds 10-4500 RPM
KVA rating................................... 80 KVA
Coolant pump 1/5 HP
Lubrication system....................... Automatic High pressure w/low Lube alarm
Power requirements 208-230 VAC 3 Ph.
Area (LxWxH).............................. 190” x 100 ” x 130”
Machine weight 101,500 lbs.
Air requirements........................... 4 cfm @ 90 psi
Way oil Mobil Vactra #2 /
Shell Tellus 32 / Air tool oil
Coolant capacity.......................... 82 Gallons
Specifications: 
Table size........................................... 86” x 157”
Longitudinal travel (X axis) 157”
Cross travel (Y axis)............................. 102”
Z axis head vertical travel 39”
Distance between columns................... 106"
Spindle nose to table top 7.8” – 47.2”
Transmission of power to the spindle...... Gear head
Table “T” Slots 11
Table load capacity.............................. 26,500 lbs.
Spindle taper CAT or BT-50
Spindle speeds (RPM)......................... 60 – 4500
w/Spindle chiller
Automatic tool changer 32 Pos. swing arm enclosed
Number of tools in the ATC .................. 32/40/60
Tool max. ( dia. / weight / length ) 4.9” / 39 lbs. / 13.7”
ATC Time............................................ 8 seconds

 

Standard Features
Manual Set AC Spindle Coolant System Nitrogen counter balance system
Auto power down Circuit Diagrams Crawler conveyor to chip bucket
Full Guarding Electronic Hand wheels Program Indicator lamps
Screw Type Chip Conveyor on both sides of the Table Optional: Manual 90 degree angle milling head

Standard Accessories
Fanuc Control on swing arm Color LCD Double Screw type Chip Augers
AC Liquid Spindle Chiller 24 Pos. Swing Arm ATC Manual/Programmable Coolant system
Operation manual set Super Auto lube system Rigid Tapping
Schematic Set Halogen work light Toolbox
Full Enclosure Leveling Bolts & Pads  

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
  Dealer Map
Note: Because of the massive size of the double column machines, special items need to be considered. These include: Heavy duty rigging and transportation, your floor capacity, our installation team. Our Pre installation visit is included in our pricing.

Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations.


Request a Quote today!

Request a meeting with us!
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages  

Y axis Fanuc Motor, and C-weight tank




Built in ladder to the machine head, spindle chiller
and gas power tank for the Z counter weight


Liquid AC spindle chiller is near the spindle
for temperature stability


Chip auger screens


End view machining a 3D Part

<
The Massive Y axis Head
Email Remedy Machine Sales, LLC Bruce Tollefson Tom Khoury Roger Gold & Chris Perseo Bavid Belding