Remedy Machine Sales, LLC

Email Remedy Machine Sales, LLC East Coast EDM Machinery Find A Dealer Near You


-Machining Center Model:  L262 -

 



E526


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.



Machining Center Model:  L262 Features

*
Centroid M400W control with 15” LCD w/ Industrial PC
*
Conversational Programming and Fanuc G-Code compatibility
*
16 Station Carousel ATC
*
10 HP Spindle Motor, BT40 or CAT40 Spindle Taper
*
8,000 rpm spindle speed with spindle oil cooler
*
Delta Axis Motors and drives, Delta Spindle inverter
*
Hardened & Ground table with Linear Guide ways
*
Double nut precision ball screws 1.16” Dia. hardened and ground for higher accuracy
*
FC30 Meehanite  Casting Base, Column and Head, annealed and stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Box ways design on Y axis to provide maximum rigidity
*
Steel way covers on all three axes
*
Coolant System and air blast system
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work ligh
*
Rigid tapping (opt.)
*
MPG Manual Hand Wheel (opt.)      
Feed Rate:
Rapid feed rate...................... X/Y: 500ipm   Z: 400 ipm
Cutting feed rate

1-350 ipm

Feed motors on XYZ..............

AC Delta 1 KW
Closed Loop

Motor:
Spindle motor/max torque......

10HP  /  7.5KW

Coolant pump 0.3 HP
Lubrication pump 150 W
Power requirement................. 17 KVA,
3 Phase 208-230 voltage
Automatic Tool Changer:
No. of tools

16

Max. tool diameter................ 3.5” (90 mm)
Max. tool weight 15 lb. (7 Kg)
Width x Depth x Height (WxDxH) 102” x 90” x 94.5”  
(2600 x 2100 x 2490mm)
Net Weight 7,700 lbs. (3500 Kg)
Additional information:
Power requirement.................

14 KVA 3 phase
208 V/230 V max

Air requirements 90 - 100 psi
Type of oil for Way oil /
oil chiller / pneumatic oil.
Mobil Vactra #2 /
Shell Tellus 32 / Air tool oil
Coolant capacity................... 26 gallons

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems


Machine Specifications: 
Table size........................................ 17.9” x 29.9” (456 x 760 mm)
Longitudinal travel (X axis) 26” (660 mm)
Cross travel..................................... 18” (460 mm)
Vertical travel 20.1" (700 mm)
Spindle nose to table top (D)............. 4.9” – 32.4” (124-825 mm)
Spindle C/L to Column 17.7”
Load capacity.................................. 900 lbs. (545 Kg)
Spindle taper. BT40 or CAT40
Spindle speeds................................ 6000 RPM
Transmission of spindle & motor. Belt
Spindle center to column front surface 20.4” (520 mm)
Spindle Tooling Packages................. 40 Taper collet or Standard inch size holders

Standard Accessories
Full Enclosure Coolant system
Operation manual Auto lube system
Toolbox Halogen work light
Leveling bolts & plate Air blast, coolant flush gun
RS-232 & USB 2.0 port Industrial PC
6 GB solid state hard drive
Shop floor programming/Conversational

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.


- Machining Center Model:  L321 -

 


E526

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.


Back to the TOP

 

Machining Center Model:  L321 Features

*
Centroid M400W control with 15” LCD w/ Industrial PC
*
Conversational Programming and Fanuc G-Code compatibility
*
16 Station Carousel ATC or Swing Arm ATC
*
15 HP Spindle Motor, BT40 or CAT40 Spindle Taper
*
8,000 rpm spindle speed with spindle oil cooler
*
Delta Axis Motors and drives, Delta Spindle inverter
*
Hardened & Ground table with Linear Guide ways
*
Double nut precision ball screws 1.16” Dia. hardened and ground for higher accuracy
*
FC30 Meehanite  Casting Base, Column and Head, annealed and stress
relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Linear ways on all axes
*
Telescopic Steel way covers on all three axes
*
Coolant System and air blast system
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work ligh
*
Rigid tapping (opt.)
*
MPG Manual Hand Wheel (opt.)      

Feed Rate:
Rapid feed rate................................. X/Y: 600ipm   Z: 450 ipm
Cutting feed rate

1-425 ipm

Feed motors on XYZ.........................

Delta  AC 1 KW

Motor:
Spindle motor/max torque.................

10 HP  /  55 Ft-Lb. (50 NM)

Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 17 KVA,
3 Phase 208-230 voltage
Automatic Tool Changer:
No. of tools

16

Max. tool diameter.......................... 3.5” (90 mm)
Max. tool weight 15 lb. (7 Kg)
Width x Depth x Height (WxDxH)....... 102” x 90” x 99”
(2590x2285x2525 mm)
Net Weight 10,250 lbs. (4650 Kg)
Additional information:
Power requirement...........................

20 KVA
3 phase 208 V/230 V max

Air requirements 90 - 100 psi
Type of oil for Way oil /
oil chiller / pneumatic oil.
Mobil Vactra #2 /
Shell Tellus 32 / Air tool oil
Coolant capacity.............................. 26 gallons

Table Work-holding options:


Hirschmann - System 3R - Kurt - Sunspot

Machine Specifications: 
Table size........................................ 17.9” x 35.4” (456 x 900 mm)
Longitudinal travel (X axis) 31.4” (800 mm)
Cross travel..................................... 20” (510 mm)
Vertical travel 24" (610 mm)
Spindle nose to table top (D)............. 5.5”-29.5” (140-750 mm)
Load capacity 1500 lbs. (680 Kg)
Spindle taper.................................... BT40 or CAT40
Spindle speeds 8000 RPM
Transmission of spindle & motor....... Belt
Spindle center to column front surface 22” (570 mm)
Spindle Tooling Packages 40 Taper collet or Standard inch size holders

Standard Accessories
Full Enclosure Coolant system
Operation manual Auto lube system
Toolbox Halogen work light
Leveling bolts & plate Air blast, coolant flush gun
RS-232 & USB 2.0 port Industrial PC
4 GB solid state hard drive
Centroid Conversational Programming

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.


- Machining Center Model:  L323 -

 


E526

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.


Back to the TOP

 

Machining Center Model:  L323 Features

*
Centroid M400W control with 15” LCD w/ Industrial PC
*
Conversational Programming and Fanuc G-Code compatibility
*
16 Station Carousel ATC or Swing Arm ATC
*
15 HP Spindle Motor, BT40 or CAT40 Spindle Taper
*
8,000 rpm spindle speed with spindle oil cooler
*
Delta Axis Motors and drives, Delta Spindle inverter
*
Hardened & Ground table with Linear Guide ways
*
Double nut precision ball screws 1.16” Dia. hardened and ground for higher accuracy
*
FC30 Meehanite  Casting Base, Column and Head, annealed and stress
relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Linear ways on all axes
*
Telescopic Steel way covers on all three axes
*
Coolant System and air blast system
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work ligh
*
Rigid tapping (opt.)
*
MPG Manual Hand Wheel (opt.)      

Feed Rate:
Rapid feed rate................................. X/Y: 800ipm   Z: 600 ipm
Cutting feed rate

1-425 ipm

Feed motors on XYZ.........................

Delta  AC 2 KW

Motor:
Spindle motor/max torque.................

15 HP  /  55 Ft-Lb. (50 NM)

Coolant pump ................................. 0.3 HP
Lubrication pump 150 W
Power requirement........................... 25 KVA,
3 Phase 208-230 voltage
Automatic Tool Changer:
No. of tools

16

Max. tool diameter............................ 3.5” (90 mm)
Max. tool weight 15 lb. (7 Kg)
Width x Depth x Height (WxDxH)....... 120” x 105” x 105
(3050x2670x2670 mm)
Net Weight 11,500 lbs. (5200 Kg)
Additional information:
Power requirement...........................

25 KVA
3 phase 208 V/230 V max

Air requirements 90 - 100 psi
Type of oil for Way oil /
oil chiller / pneumatic oil.
Mobil Vactra #2 /
Shell Tellus 32 / Air tool oil
Coolant capacity.............................. 26 gallons

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems


Machine Specifications: 
Table size........................................ 17.9” x 36.6” (456 x 930 mm)
Longitudinal travel (X axis) 34” (860 mm)
Cross travel..................................... 21” (540 mm)
Vertical travel 26" (660 mm)
Spindle nose to table top (D)............. 5.5”-31.8” (140-810 mm)
Load capacity 1100 lbs. (500 Kg)
Spindle taper.................................... BT40 or CAT40
Spindle speeds 8000 RPM
Transmission of spindle & motor....... Belt
Spindle center to column front surface 24” (610 mm)
Spindle Tooling Packages 40 Taper collet or Standard inch size holders

Standard Accessories
Full Metal Enclosure Coolant system
Operation manual Auto lube system
Toolbox Halogen work light
Leveling bolts & plate Air blast, coolant flush gun
RS-232 & USB 2.0 port Industrial PC
4 GB solid state hard drive
Centroid Conversational Programming

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.


- Machining Center Model:  L423 -

 


L423

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.



Back to the TOP

 

Machining Center Model:  L423 Features

*
Centroid M400W control with 15” LCD w/ Industrial PC (Fanuc Optional)
*
Conversational Programming and Fanuc G-Code compatibility
*
16 Station Carousel ATC or Swing Arm ATC
*
15 HP Spindle Motor, BT40 or CAT40 Spindle Taper
*
8,000 rpm spindle speed with spindle oil cooler
*
Delta Axis Motors and drives, Delta Spindle inverter
*
Hardened & Ground table with Linear Guide ways
*
Double nut precision ball screws 1.16” Dia. hardened and ground for higher accuracy
*
FC30 Meehanite  Casting Base, Column and Head, annealed and stress relieved for long term reliability
*
100% Laser tested positioning accuracy & repeatability
*
Linear ways on all axes
*
Telescopic Steel way covers on all three axes
*
Coolant System and air blast system
*
Automatic lubrication system with Low Lube alarm
*
Built-in Quartz work ligh
*
Rigid tapping (opt.)
*
MPG Manual Hand Wheel (opt.)      

Feed Rate:
Rapid feed rate................................. X/Y: 800ipm   Z: 600 ipm
Cutting feed rate

1-425 ipm

Feed motors on XYZ.........................

Delta  AC 2 KW

Motor:
Spindle motor/max torque.................

15 HP  /  55 Ft-Lb. (50 NM)

Coolant pump 0.3 HP
Lubrication pump.............................. 150 W
Power requirement 25 KVA,
3 Phase 208-230 voltage
Automatic Tool Changer:
No. of tools

20

Max. tool diameter........................... 3.5” (90 mm)
Max. tool weight 15 lb. (7 Kg)
Width x Depth x Height (WxDxH)....... 130” x 105” x 105”
(3300x2670x2670 mm)
Net Weight 13,500 lbs. (6200 Kg)
Additional information:
Power requirement...........................

25 KVA
3 phase 208 V/230 V max

Air requirements 90 - 100 psi
Type of oil for Way oil /
oil chiller / pneumatic oil
Mobil Vactra #2 /
Shell Tellus 32 / Air tool oil
Coolant capacity.............................. 26 gallons

Table Work-holding Options:
- Hirschmann - Kurt - Sunspot
and all other types of workpart clamping systems

Machine Specifications: 
Table size........................................ 20” x 49.6” (510 x 1260 mm)
Longitudinal travel (X axis) 41.7” (1060 mm)
Cross travel..................................... 24” (610 mm)
Vertical travel 26.7" (680 mm)
Spindle nose to table top (D)............. 5.5”-32.4” (140-825 mm)
Load capacity 1600 lbs. (800 Kg)
Spindle taper.................................... BT40 or CAT40
Spindle speeds 8000 RPM
Transmission of spindle & motor........ Belt
Spindle center to column front surface 26.4” (670 mm)
Spindle Tooling Packages 40 Taper collet or Standard inch size holders

Standard Accessories
Full Metal Enclosure Coolant system
Operation manual Auto lube system
Toolbox Halogen work light
Leveling bolts & plate Air blast, coolant flush gun
RS-232 & USB 2.0 port Industrial PC
4 GB solid state hard drive
Centroid Conversational Programming

CNC Control Centroid M400W - A Shop friendly Windows based, High Speed Industrial based PC control.
Easy to use Conversational programming, with graphical teach in cycles. The Control Creates and runs Fanuc compatible G-Codes, 6+ Gig Solid state memory, multiple USB and Network ports. Large 15” color LCD Screen with 3D Color graphics. Standard 6 Zero Points G54-9, and 200 tool offsets. On-line System diagnostics. Read in and auto-machine DXF files.
Use this Control Data link to see all of the standard and optional Centroid control features. Review all of our Control fact sheets for standard and optional features.
Fanuc Oi-MB or Fagor Controls are Optional.

Email Remedy Machine Sales, LLC Bruce Tollefson Tom Khoury Roger Gold & Chris Perseo Bavid Belding