Remedy Machine Sales, LLC

Email Remedy Machine Sales, LLC East Coast EDM Machinery Find A Dealer Near You


- Hansvedt Arrow EDM Machinery -
Models: HVT- 3S Wire EDM w/AWT

 

H322ZNCRam


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

 


Hansvedt HVT- 3S Wire EDM w/AWT Features

*Compact Design machine tool with a cast iron base and column
*Easy to use CNC control, and Hansvedt Nationwide support

*
Color Monitor, and Magnetic Remote Control Box
*
Rigid Overhead movement of the U,V and Z axes
*
Automatic water jet wire rethreading device (AWT)
*
Use brass wire for hi-speed EDM’ing.    0.010” Provided
*
Automatic machining conditions
*
Precision Stainless steel table & Wire Sq. device
*
Large Worktank door, For Easy Work Mounting
*
Stainless steel dielectric system with easy change filters
*
AC Mosfet Power supply
*
Erowa, 3R, or Hirschman tooling compatible
Travel (X/Y/Z)........................ 13.75 x 9.84 ”
Overhead travels (U,V & Z) 3.14/3.14 & 8.27
Standard wire sizes.............. 0.006 – 0.012”
Drive Systems            AC Servo closed loop
Taper Angles @ height +/- 24º / 3.15
 
Work tank size (W,D,H)...........

33” x 20” x 11.8”

Worktable Size  (Stainless Steel) 24 x 19
Max Workpiece Size............. 28 x 22 x 8
Max Workpiece weight 650 lbs

Multiple options are available: Wire tension meter, Wire guides, Super fine finish circuit,
glass scale feedback for increased accuracy, Wire chopper, 44 Lb. Wire capacity unit  and 6th Axis rotary table.
Machine weight.................................... 3,500 lbs
Width/depth/height 105” x 88” x 79”
Power requirement................................ 200-440 VAC 3 Ph
KVA requirement 18
   
Total Dielectric volume.......................... 170 gallons
Filter type / number.............................. Paper element / 2
Ion Resin tank size 4 Gallon
Automatic water chiller.......................... A/C

Easy to use Power Supply
Machining data charts for many applications

Keyboard, RS-232 & USB port
Automatic edge, corner and center detection
Rigid Overhead UV Axis design
All axes have precision linear guide ways
Automatic power recovery


Request a full quote for more details on this or any wire machine.


- Hansvedt Arrow EDM Machinery -
Models: HVT- 4S Wire EDM w/AWT

H4s

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

 

Hansvedt HVT- 4S Wire EDM w/AWT Features

*Compact Design machine tool with a cast iron base and column
*Easy to use CNC control, and Hansvedt Nationwide support

*
Color Monitor, and Magnetic Remote Control Box
*
Rigid Overhead movement of the U,V and Z axes
*
Automatic water jet wire rethreading device (AWT)
*
Use brass wire for hi-speed EDM’ing.    0.010” Provided
*
Automatic machining conditions
*
Precision Stainless steel table & Wire Sq. device
*
Dual Worktank doors, For Easy Work Mounting
*
Stainless steel dielectric system with easy change filters
*
AC Mosfet Power supply
*
Erowa, 3R, or Hirschman tooling compatible


Travel (X/Y/Z)........................... 13.75 x 9.84 ”
Overhead travels (U,V & Z) 3.14/3.14 & 8.27"
Standard wire sizes.................. 0.006 – 0.012”
Drive Systems            AC Servo closed loop
Taper Angles @ height +/- 24º / 3.15
 
Work tank size (W,D,H)..............

33” x 20” x 11.8”

Worktable Size  (Stainless Steel) 24 x 12” w 3-T slots
Max Workpiece Size................ 29.5 x 25.5 x 9.65
Max Workpiece weight 1,000 lbs

Control and Power supply features: AC Mosfet Power supply output - Non electrolysis power supply with adaptive control, Peak current in gap average amperage is 25A, Closed loop AC Servo Drive on all 5 axes, Industrial grade PC, Pentium 28GHZ, 1GB of Ram memory and 14GB main memory, Works with most CAD-CAM Systems, AC Servo motors directly connected to the ball screws, Submerged machining and AC water chiller, Adaptive Power supply for edge entry machining, and Start point return with AWT functions
Multiple options are available: Wire tension meter, Wire guides, Super fine finish circuit, glass scale feedback for increased accuracy, Wire chopper, 44 Lb. Wire capacity unit  and 6th Axis rotary table.

Machine weight.................................... 3,500 lbs
Width/depth/height 135” x 85” x 82”
Power requirement................................ 200-440 VAC 3 Ph
KVA requirement 18
Dielectric volume.................................. 170 gallons
Filter type/number Paper element / 2
Ion Resin tank size................................ 4 Gallon
Automatic water chiller A/C

 

Easy to use Power Supply
Machining data charts for many applications

Keyboard, RS-232 & USB port
Automatic edge, corner and center detection
Rigid Overhead UV Axis design
All axes have precision linear guide ways
Automatic power recovery


- Hansvedt Arrow EDM Machinery -
Models: HVT- 6S & 6F Wire EDM w/AWT

H6S6F


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

 

 

Hansvedt HVT- 6S & 6F Wire EDM w/AWT Features

*Compact Design machine tool with a cast iron base and column
*Easy to use CNC control, and Hansvedt Nationwide support

*
Color Monitor, and Magnetic Remote Control Box
*
Rigid Overhead movement of the U,V and Z axes
*
Automatic water jet wire rethreading device (AWT)
*
Use brass wire for hi-speed EDM’ing.    0.010” Provided
*
Automatic machining conditions
*
Precision Stainless steel table & Wire Sq. device
*
Dual Worktank doors, For Easy Work Mounting
*
Stainless steel dielectric system with easy change filters
*
AC Mosfet Power supply
*
Erowa, 3R, or Hirschman tooling compatible


Travel (X/Y/Z)........................... 25.6 x 9.84 ”
Overhead travels (U,V & Z) 3.94/3.94 & 15.75”
Standard wire sizes.................. 0.006 – 0.012”
Drive Systems            AC Servo closed loop
Taper Angles @ height +/- 24º / 3.15
 
Work tank size (W,D,H)..............

33” x 20” x 11.8”

Worktable Size  (Stainless Steel) 24 x 12” w 3-T slots
Max Workpiece Size................ 43.3 x 28.3 x 13.6”
Max Workpiece weight 1,500 lbs
H6WT
Machine weight.................................... 6,300 lbs
Width/depth/height 135” x 93” x 95”
Power requirement................................ 200-240 VAC 3 Ph
KVA requirement 18
Dielectric volume.................................. 170 gallons
Filter type/number Paper element / 2
Ion Resin tank size................................ 4 Gallon
Automatic water chiller A/C

 

Easy to use Power Supply
Machining data charts for many applications

Audible Edge and top surface find beeper
Easy to use DC Arc Protection
Volt and Amp Meters

 

Hansvedt Offers Flush type
machines in many sizes for those special requirements

 

Multiple options are available: Wire tension meter, Wire guides, Super fine finish circuit, glass scale feedback for increased accuracy, Wire chopper, 44 Lb. Wire capacity unit  and 6th Axis rotary table.



- Hansvedt Arrow EDM Machinery -
Models: HVT- 8S Wire EDM w/AWT

H8S


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

 

Hansvedt HVT- 8S Wire EDM w/AWT Features

*Compact Design machine tool with a cast iron base and column
*Easy to use CNC control, and Hansvedt Nationwide support

*
Color Monitor, and Magnetic Remote Control Box
*
Rigid Overhead movement of the U,V and Z axes
*
Automatic water jet wire rethreading device (AWT)
*
Use brass wire for hi-speed EDM’ing.    0.010” Provided
*
Automatic machining conditions
*
Precision Stainless steel table & Wire Sq. device
*
Dual Worktank doors, For Easy Work Mounting
*
Stainless steel dielectric system with easy change filters
*
AC Mosfet Power supply
*
Erowa, 3R, or Hirschman tooling compatible


Travel (X/Y/Z)........................... 33.5 x 17.7”
Overhead travels (U,V & Z) 3.94/3.94 & 15.75”
Standard wire sizes.................. 0.006 – 0.012”
Drive Systems            AC Servo closed loop
Taper Angles @ height +/- 24º / 3.15
 
Work tank size (W,D,H)..............

33” x 30.7” x 13.5”

Worktable Size  (Stainless Steel) 24 x 12” w 3-T slots
Max Workpiece Size................ 50.4 x 28.3 x 13.6”
Max Workpiece weight 2,200 lbs

Control and Power supply features: AC Mosfet Power supply output - Non electrolysis power supply with adaptive control, Peak current in gap average amperage is 25A, Closed loop AC Servo Drive on all 5 axes, Industrial grade PC, Pentium 28GHZ, 1GB of Ram memory and 14GB main memory, Works with most CAD-CAM Systems, AC Servo motors directly connected to the ball screws, Submerged machining and AC water chiller, Adaptive Power supply for edge entry machining, and Start point return with AWT functions
Multiple options are available: Wire tension meter, Wire guides, Super fine finish circuit, glass scale feedback for increased accuracy, Wire chopper, 44 Lb. Wire capacity unit  and 6th Axis rotary table.

Machine weight.................................... 12,000 lbs
Width/depth/height 147” x 122” x 95”
Power requirement................................ 200-240 VAC 3 Ph
KVA requirement 18
Dielectric volume.................................. 170 gallons
Filter type/number Paper element / 2
Ion Resin tank size................................ 4 Gallon
Automatic water chiller A/C

 

Easy to use Power Supply
Machining data charts for many applications

Keyboard, RS-232 & USB port
Automatic edge, corner and center detection
Rigid Overhead UV Axis design
All axes have precision linear guide ways
Automatic power recovery


Email Remedy Machine Sales, LLC Bruce Tollefson Tom Khoury Roger Gold & Chris Perseo Bavid Belding