Remedy Machine Sales, LLC

Email Remedy Machine Sales, LLC East Coast EDM Machinery Find A Dealer Near You


- Hansvedt Arrow EDM Machinery -
Models: HVT-322 ZNC Ram EDM

H322ZNCRam


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

 


Hansvedt HVT-322 ZNC Ram EDM Features

* Rigid floor standing machine tool with a cast iron base and column
* Easy to use controls, and Hansvedt Nationwide support

*
Programmable Z Axis EDM
*
Rigid Z axis ram with 8” Backslide
*
Audible edge and work piece top find beeper
*
Automatic DC Arc Protection and gap monitors
*
Precision cast iron table with 3 T-slots
*
Dual Worktank doors, For Easy Work Mounting
*
Complete dielectric system with easy change filter
*
F(Optional) Easy to use 2 or 3 axis DRO’s
*
Use graphite or metallic electrodes
*
Erowa, 3R, or Hirschman tooling compatible
Travel (X/Y/Z).......................... 12 x 7.8 x 7.8”
Backslide Travel 8”
Z Axis Table to platen............. 7.5” – 23.3”
Max. Electrode Weight 130 lbs
Work tank size (W,D,H)............

32.5” x 19.5” x 12”

Worktable Size 24 x 12” w 3-T slots
Max Workpiece weight............ 1,200 lbs
 
Power supply output 50 amps.  4.5 KVA
Peak current.......................... 10 steps
Servo Speed Control Infinitely variable
T-On...................................... 0.5 – 1800 in 35 steps
T-Off Infinitely variable
Gap Voltage........................... Infinitely variable
Capacitor Settings…(Opt) 45 Steps

Machine weight.................................... 2,700 lbs
Width/depth/height 85” x 65” x 86”
Power requirement................................ 200-440 VAC 3 Ph
   
Dielectric volume.......................... 60 gallons
Dielectric Tank is built into the Machine Base
Filter type / number.............................. Paper element / 1

Easy to use Power Supply
Machining data charts for many applications

Audible Edge and top surface find beeper
Easy to use DC Arc Protection
Volt and Amp Meters


Automatic Z Axis Machining and Power setting changes.

Add an orbiter for sidewall machining !



- Hansvedt Arrow EDM Machinery -
Models:HVT-430 ZNC Ram EDM

H430

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

 

Hansvedt HVT-430 ZNC Ram EDM Features

* Rigid floor standing machine tool with a cast iron base and column
* Easy to use controls, and Hansvedt Nationwide support

*
Programmable Z Axis EDM
*
Rigid Z axis ram with 8” Backslide
*
Audible edge and work piece top find beeper
*
Automatic DC Arc Protection and gap monitors
*
Precision cast iron table with 3 T-slots
*
Dual Worktank doors, For Easy Work Mounting
*
Complete dielectric system with easy change filter
*
F(Optional) Easy to use 2 or 3 axis DRO’s
*
Use graphite or metallic electrodes
*
Erowa, 3R, or Hirschman tooling compatible


Travel (X/Y/Z)............................ 15.75 x 11.8 x 7.9”
Backslide Travel 8”
Z Axis Table to platen................ 9” –24.9”
Max. Electrode Weight............. 165 lbs
Work tank size (W,D,H)...............

42” x 23.5” x 13.3”

Worktable Size 25.5 x 15.75” w 3-T slots
Max Workpiece weight.............. 2,000 lbs
 
Power supply output 75 amps.  7 KVA
Peak current............................. 15 steps
Servo Speed Control Infinitely variable
T-On........................................ 0.5 – 1800 in 35 steps
T-Off Infinitely variable
Gap Voltage.............................. Infinitely variable
Capacitor Settings…(Opt) 45 Steps
Machine weight.................................... 3,800 lbs
Width/depth/height 115” x 66” x 85”
Power requirement................................ 200-440 VAC 3 Ph
   
Dielectric volume.................................. 90 gallons
Dielectric Tank is external to Machine Base
Not Pictured
Dielectric Tank Size.............................. 37 x 40” (WxL)

Easy to use Power Supply
Machining data charts for many applications

Audible Edge and top surface find beeper
Easy to use DC Arc Protection
Volt and Amp Meters

Hansvedt/Arrow is known for quality Service and support!
Buy a Hansvedt EDM because it is a better value!


- Hansvedt Arrow EDM Machinery -
Models:HVT-500 ZNC Ram EDM

H430

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

 

Hansvedt HVT-500 ZNC Ram EDM Features

* Rigid floor standing machine tool with a cast iron base and column
* Easy to use controls, and Hansvedt Nationwide support

*
Programmable Z Axis EDM
*
Rigid Z axis ram with 8” Backslide
*
Audible edge and work piece top find beeper
*
Automatic DC Arc Protection and gap monitors
*
Precision cast iron table with 4 T-slots
*
Dual Worktank doors, For Easy Work Mounting
*
Complete dielectric system with easy change filter
*
F(Optional) Easy to use 2 or 3 axis DRO’s
*
Use graphite or metallic electrodes
*
Erowa, 3R, or Hirschman tooling compatible


Travel (X/Y/Z)............................ 19.7 x 15.75 x 11.8”
Backslide Travel 8”
Z Axis Table to platen................ 6” – 25.5”
Max. Electrode Weight............. 330 lbs
Work tank size (W,D,H)...............

49” x 26” x 16.5”

Worktable Size 29.5 x 20.5” w 4-T slots
Max Workpiece weight.............. 2,650 lbs
 
Power supply output 100 amps.  9 KVA
Peak current............................. 20 steps
Servo Speed Control Infinitely variable
T-On........................................ 0.5 – 1800 in 35 steps
T-Off Infinitely variable
Gap Voltage.............................. Infinitely variable
Capacitor Settings…(Opt) 45 Steps
Machine weight.................................... 4,700 lbs
Width/depth/height 130” x 75” x 97”
Power requirement................................ 200-240 VAC 3 Ph
   
Dielectric volume.................................. 150 gallons
Dielectric Tank is external to Machine Base
Not Pictured
Dielectric Tank Size.............................. 37 x 55” (WxL)

Easy to use Power Supply
Machining data charts for many applications

Audible Edge and top surface find beeper
Easy to use DC Arc Protection
Volt and Amp Meters



- Hansvedt Arrow EDM Machinery -
Models:HVT-650 ZNC Ram EDM

H650

Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

MSRP:  Call for your complete package pricing
Choose 75/100/125 or 150 Amp P/S

 

Hansvedt HVT-650 ZNC Ram EDM Features

* Rigid floor standing machine tool with a cast iron base and column
* Easy to use controls, and Hansvedt Nationwide support

*
Programmable Z Axis EDM
*
Rigid Z axis ram with 11.8” Backslide
*
Audible edge and work piece top find beeper
*
Automatic DC Arc Protection and gap monitors
*
Precision cast iron table with 4 T-slots
*
Dual Worktank doors, For Easy Work Mounting
*
Complete dielectric system with easy change filter
*
F(Optional) Easy to use 2 or 3 axis DRO’s
*
Use graphite or metallic electrodes
*
Erowa, 3R, or Hirschman tooling compatible


Travel (X/Y/Z)............................ 23.6 x 19.7 x 11”
Backslide Travel 11.8”
Z Axis Table to platen................ 9.4” – 32.2”
Max. Electrode Weight............. 660 lbs
Work tank size (W,D,H)...............

49” x 26” x 16.5”

Worktable Size 36 x 23.5” w 4-T slots
Max Workpiece weight.............. 5,000 lbs
 
Power supply output 100 amps.  13 KVA
Peak current............................. 25 steps per P/S choice
Servo Speed Control Infinitely variable
T-On........................................ 0.5 – 1800 in 35 steps
T-Off Infinitely variable
Gap Voltage.............................. Infinitely variable
Capacitor Settings…(Opt) 45 Steps
Machine weight.................................... 7,100 lbs
Width/depth/height 200” x 95” x 97”
Power requirement................................ 200-240 VAC 3 Ph
   
Dielectric volume.................................. 90 gallons
Dielectric Tank is external to Machine Base
Not Pictured
Dielectric Tank Size.............................. 51 x 80” (WxL)

Easy to use Power Supply
Machining data charts for many applications

Audible Edge and top surface find beeper
Easy to use DC Arc Protection
Volt and Amp Meters


Email Remedy Machine Sales, LLC Bruce Tollefson Tom Khoury Roger Gold & Chris Perseo Bavid Belding