Remedy Machine Sales, LLC

Email Remedy Machine Sales, LLC East Coast EDM Machinery Find A Dealer Near You


- Remedy 2VSG Manual Knee Mill Machine -


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.


Remedy 2VSG Manual Knee Mill
Features

*
3 HP Spindle Motor
*
FC30 Meehanite cast frame annealed and stress relieved
*
9” x 49” Bridgeport style knee mill
*
0-4200 RPM Infinitely variable
*
Precision APEC Class 7 spindle bearings to insure run out is less than 0.0002”
*
R8 or 30 Taper spindle
*
Anti-Rust chrome quill
*
Hardened & ground table with Turcite-B coated ways
*
Double nut precision acme lead screws
*
Way covers on all 3 axes
*
One shot lubrication system
*
Tool box and touch up paint
*
Single Phase option

Motor:
Spindle motor/max torque..... 3HP (Std.)
KVA rating 4 KVA, 15 amps
Coolant pump (optional)........ 1/8 HP
Lubrication pump Manual 1 shot
Power requirement............... 220–440 VAC 3 Ph
WidthxDepthxHeight (WxDxH) 110” x 70” x 82”
Machine weight...................... 2,200 lbs.
Air requirements w/opt. power draw bar
Way oil................................. Mobil Vectra #2
Coolant capacity 7 gallons

Head:
Swivel (left/right) 90 degree
Tilt (front/back). 45 degree
Quill feeds 0.0015, 0.003, 0.006”

Machine Specifications: 

Table size................................
9” x 49” with (3) T-slots
Longitudinal travel (X axis)
36”
Cross travel (Y axis).................
12”
Z axis quill travel
5”
Knee travel (Manual).................
16.0”
Quill diameter
3.375”
Spindle nose to table top...........
.075” – 16.75”
Table load capacity
600 lbs.
Spindle taper............................
R8 or (optional 30 Taper)
Spindle speeds (RPM)
70 – 1200 Low
1000 - 4200 High
Spindle center to column......
6.875-27.875”

Power Knee

Power feed X Axis
Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
  Dealer Map
Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations. Request one today!
     
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages  


- Remedy Manual Milling Machine 2EV -



Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Small, Medium, and Large Manual Mills are available.

Remedy Manual Milling Machine 2EV Features

*
5 HP Electronic inverter 3HP Spindle Motor
*
FC30 Meehanite cast frame annealed and stress relieved
*
Anti-Rust chrome quill
*
9” x 49” Bridgeport style knee mill
*
0-4200 RPM Infinitely variable
*
Precision APEC Class 7 spindle bearings to insure run out is less than 0.0002”
*
R8 or 30 Taper spindle
*
Anti-Rust chrome quill
*
Hardened & ground with Turcite-B ways
*
Way covers on all 3 axes (Not shown in above pictures)
*
Double nut precision acme lead screws
*
Way covers on all 3 axes
*
One shot lubrication system
*
Tool box and touch up paint
*
Single Phase option

Motor:
Spindle motor/max torque......... 3HP
KVA rating 4 KVA 15 amps
Coolant pump (optional)............. 1/8HP
Lubrication system Manual 1 shot
Power requirement..................... 3 Phase 208-230 voltage
Width x Depth x Height (WxDxH) 110” x 70” x 85”
Machine weight........................ 2,200 lbs.
Spindle Tooling Packages R8 Standard inch size holders
Box Y axis ways

Machine Specifications: 

Table size...........................................
9” x 49
Longitudinal travel (X axis)
36”
Cross travel (Y axis)............................
12”
Z axis quill travel
5”
Knee travel (Manual).............................
16”
Quill diameter
3.375”
Spindle nose to table top......................
.075” – 16.75”
Table load capacity
600 lbs.
Spindle taper.......................................
R8 or 30 Taper
Spindle speeds (RPM)
70 – 1200 Low
1000 - 4000 High
Spindle center to column front surface....
6.875-27.875”

Head:

Swivel (left/right) 90 degrees
Tilt (front/back) 45 degrees
Quill feeds....................................... 0.0015, 0.003, 0.006”


Inverter Head

Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
  Dealer Map
Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations. Request one today!
     
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages  


- Remedy Manual Milling Machine 3VHG -



Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Machine delivery and professional set up is available from Remedy and your dealer.

Your machine will arrive fully equipped and ready to go right into production on your shop floor.

Remedy Manual Milling Machine 3VHG Features

*
3 HP Spindle Motor
*
0-4200 RPM Infinitely variable w/back gear
*
FC30 Meehanite cast frame annealed and stress relieved
*
9” x 49” Bridgeport style knee mill
*
Precision APEC Class 7 spindle bearings to insure run out is less than 0.0002”
*
R8 or 30 Taper spindle
*
Anti-Rust chrome quill
*
Hardened & ground with Turcite-B ways
*
Double nut precision acme lead screws
*
Way covers on all 3 axes
*
One shot lubrication system
*
Tool box and touch up paint
*
Single Phase option

Motor:
Spindle motor/max torque............ 3HP (Std)
KVA rating 4 KVA 15 amps
Coolant pump (optional)............... 1/8HP
Lubrication system Manual 1 shot
Power requirement...................... 220–440 VAC 3 Ph.
Width x Depth x Height (WxDxH) 105” x 80” x 84”
Machine weight.......................... 2,900 lbs.
Air requirements w/opt. power draw bar
Way oil...................................... Mobil Vectra
Coolant capacity 7 gallons

Head:

Swivel (left/right) 90 degrees
Tilt (front/back) 45 degrees
Quill feeds....................................... 0.0015, 0.003, 0.006”
Optional Items available
DRO’s XY – XY Quill – XY Knee Power Feeds X, Y, Knee
Inverter electronic spindle Table chip pan
Lower (Base) chip pan Tooling: R8 – 30 taper
Right angle attachment 6” or 8” Riser Block

Machine Specifications: 

Table size...........................................
10” x 54”
Longitudinal travel (X axis)
36.375”
Cross travel (Y axis)............................
15.75”
Z axis quill travel
5”
Knee travel (Manual).............................
16.0”
Quill diameter
3.375”
Spindle nose to table top......................
.075” – 16.75”
Table load capacity
700 lbs.
Spindle taper.......................................
R8 or 30 Taper
Spindle speeds (RPM)
70 – 1200 Low
1000 - 4000 High
Spindle center to column front surface....
6.875-27.875”

Power Knee

 


Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
  Dealer Map
Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations. Request one today!
     
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages  


- Remedy Manual Milling Machine 3EV -

 


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP

Remedy Milling Machines, Quality and features since 1986

Remedy Manual Milling Machine 3EV Features

*
5 HP Electronic Inverter 3HP Spindle Motor
*
FC30 Meehanite cast frame annealed and stress relieved
*
10” x 54” Bridgeport style knee mill
*
0-5000 RPM Infinitely variable
*
Precision APEC Class 7 spindle bearings to insure run out is less than 0.0002”
*
R8 or 30 Taper spindle
*
Anti-Rust chrome quill
*
Hardened & ground table with Turcite-B coated ways
*
Double nut precision acme lead screws on the X & Y axes
*
Way covers on all 3 axes (Not shown in above pictures)
*
One shot lubrication system
*
Tool box and touch up paint
*
Single Phase option
Motor:
Spindle motor/max torque......... 3HP
KVA rating 4 KVA 15 amps
Coolant pump (optional)............. 1/8HP
Lubrication system Manual 1 shot
Power requirement..................... 3 Phase 208-230 voltage
Width x Depth x Height (WxDxH) 110” x 70” x 85”
Machine weight........................ 2,200 lbs.
Spindle Tooling Packages R8 Standard inch size holders

Machine Specifications: 

Table size...........................................
10” x 54” w/(3) T-slots
Longitudinal travel (X axis)
36.4”
Cross travel (Y axis)............................
15.75”
Z axis quill travel
5”
Knee travel (Manual).............................
16.0”
Quill diameter
3.375”
Spindle nose to table top......................
.075” – 16.75”
Table load capacity
700 lbs.
Spindle taper.......................................
R8 or (optional 30 Taper)
Spindle speeds (RPM)
70 – 1200 & 1000 - 4000
with Hi/Lo gear
Transmission of spindle & motor............
Belt
Spindle center to column front surface....
6.875-27.875”

Head:

Swivel (left/right) 90 degrees
Tilt (front/back) 45 degrees
Quill feeds....................................... 0.0015, 0.003, 0.006”

Optional Items available
DRO’s XY – XY Quill – XY Knee Power Feeds X, Y, Knee
Inverter electronic spindle Table chip pan
Lower (Base) chip pan Tooling: R8 – 30 taper
Right angle attachment 6” or 8” Riser Block
Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
  Dealer Map
Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations. Request one today!
     
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages  

- Remedy Manual Milling Machine 4EV & 4VK -

4VK Manual Knee Mill


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP



Remedy Manual Milling Machine 4EV & 4VK Features

* 5 HP Spindle Motor Vary Speed Head
* 0-3900 RPM Infinitely variable w/back gear
* Power Knee is a standard feature
* FC30 Meehanite cast frame annealed and stress relieved
* 12” x 60” Bridgeport style knee mill
* Precision APEC Class 7 spindle bearings to insure run out is less than 0.0002”
* NST or NMTB-40 Taper spindle
* Anti-Rust chrome quill
* Hardened & ground with Turcite-B ways
* Box ways on the Y and Z Axes
* C7 Double nut precision acme lead screws
* Way covers on all 3 axes
* Chip pan on the base of the machine
* Automatic lubrication system w/low lube alarm
* Work lamp
* Tool box and touch up paint
* Single Phase option
  4EV Items
* 5 HP Spindle motor and 5 HP inverter
* 20-4000 RPM w/back gear
Motor:
Spindle motor/max torque......... 5 HP (Std.)
KVA rating 6.5 KVA 20 amps
Coolant pump (optional)............. 1/8HP
Lubrication system Electric
Power requirement.................... 220–440 VAC 3 Ph.
Area (LxWxH) 105” x 80” x 84”
Machine weight........................ 4,300 lbs
Air requirements w/opt. power draw bar
Way oil.................................... Mobil Vectra #2
Coolant capacity 7 gallons

Optional Items available
DRO’s XY – XY Quill – XY Knee Longitudinal travel Power Feeds X, Y, Knee
Inverter electronic spindle (Upgradable) Table chip pan
Lower (Base) chip pan Tooling: NST 40 taper
Right angle attachment - 40T 6” or 8” Riser Block
7.5 HP Spindle motor upgrade Power Draw Bar
Machine Specifications:
Table size........................................ 12” x 60”
Longitudinal travel (X axis) 40”
Cross travel (Y axis)........................ 17”
Z axis quill travel 5.0”
Knee travel (Manual)......................... 16 5/8”
Quill diameter 3.375”
Spindle nose to table top.................. 075” – 16.75”
Table load capacity 900 lbs.
Spindle taper.................................... NST-40 Taper
Spindle speeds (RPM) 30 – 900 Low
900-3900 Hi
Spindle center to column.................. 6.875” – 27.875”
Ram Travel 20”
Head  
Swivel (left/right) 90 degrees
Tilt (front/back) 45 degrees
Quill feeds....................................... 0.0015, 0.003, 0.006”

 

Power control box




4EV Head
Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
  Dealer Map
Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations. Request one today!
     
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages  

- Remedy Manual Milling Machine 7EV -


Get our prices quickly by calling Remedy @ 215-540-0404
or Request a Quote online.

Back to the TOP



4EV Head

 

 

Remedy Manual Milling Machine 7EV Features

*
7.5 HP Electronic Inverter 7.5 HP Spindle Motor
*
FC30 Meehanite cast frame annealed and stress relieved
*
14” x 54” Bridgeport style knee mill
*
0-4000 RPM Infinitely variable
*
Precision APEC Class 7 spindle bearings to insure run out is less than 0.0002”
*
40 Taper spindle
*
Anti-Rust chrome quill
*
Hardened & ground with Turcite-B ways
*
Double nut precision acme lead screws
*
Way covers on all 3 axes
*
Automatic lubrication system
*
Tool box and touch up paint
*
Heavy Duty gear box X & Y power feed
*
Power Knee

Remedy Milling Machines, Quality and features since 1986

Motor:

Spindle motor/max torque................. 5HP (Std.)
KVA rating 7 KVA 18 amps
Coolant pump (optional).................... 1/8HP
Lubrication system Automatic
Power requirements.......................... 220–440VAC 3Ph
Area (LxWxH) 105” x 80” x 84”
Machine weight................................ 2,900 lbs
Air requirements w/opt. power draw bar
Way oil............................................ Mobil Vectra #2
Coolant capacity 7 gallons

Optional Items available
Inverter electronic spindle Standard Power Feeds X, Y, Knee
DRO’s XY – XY Quill (Newal – Sino) Table chip pan
Lower (Base) chip pan Tooling: 40 taper
Right angle attachment 6” or 8” Riser Block

Machine Specifications: 

Table size......................................... 14” x 54”
Longitudinal travel (X axis) 36.5”
Cross travel (Y axis).......................... 19.75”
Z axis quill travel 6”
Knee travel (Manual).......................... 23.6”
Quill diameter 6"
Spindle nose to table top................... .075” – 24.75”
Table load capacity 1200 lbs.
Spindle taper..................................... 40 Taper
Spindle speeds (RPM) 70 – 900 Low
1000- 3900 rpm with Hi/Lo gear
Spindle center to column.................... 6.875” – 27.875”
Head:  
Swivel (left/right)………………............. 90 degrees
Tilt (front/back) 45 degrees
Quill feeds......................................... 0.0015, 0.003, 0.006”
Request a full quotation or contact your local dealer to have a salesman contact you directly,
so that you can learn more about our complete machine package items.
Request a Quote
  Dealer Map
Shipping, rigging, training, tooling packages, more machine features, and control options are all listed in our full machine quotations. Request one today!
     
Check out all of the Tooling Package choices we offer for your New Remedy Machine.
  Mill Tooling Packages