Remedy ATM 1054II Rigid Head ATC Bed Mill
Fanuc Oi-M – Fagor 8055I Controls
Remedy 105411 ATC Rigid Head Features:
- 20″ Full CNC Z Axis operation and the stability of a
rigid head - 7.5 HP Spindle Motor, CAT 40 Taper Spindle.
- The head is counter balanced with a solid weight and
dual chains. - 20-6000 RPM Programmable spindle
- Hardened & Groundw/ Turcite-B coating on all
machine ways - Heavy Duty C5 Precision Ground Double nut ball screws,have higher accuracy and better repeatability.
- Heavy duty FC30 Meehanite Casting Base, Column
and Head. - Dovetail X and Box Y&Z way design for smooth movement and higher repeatability.
- Way covers on all three axes.
- Automatic lubrication system with Low lube alarm.
- LED work lamp has lower heat.
- Programmable coolant system.
- (Optional) Table and Machine Chip guard sets.
P.O.R.
Table size: …………… 10 x 54” with (3) T-slots
Longitudinal travel: (X axis) ….. 31.5”
Cross travel (Y axis): …………..……. 20”
Z Axis Head travel: …………………… 20.8”
Rapid Feed Rate: X,Y,Z: …………. 250 ipm
Machining feed rate: ……………… 0.2 – 225 ipm
Spindle nose to table top: ……. 5.3” – 25.4”
Table Load capacity: ……………… 650 lbs.
Spindle taper: …………. CAT40
Spindle RPM: …………. 50 – 6,000 RPM One gear range
Transmission of spindle & motor: …….. Belt
Fixed and rigid head with all ATC Machines
CAT40 Tooling – Standard Pull stud required for ATC
50 – 6,000 RPM Spindle
Rigid tapping
ATC Data – 12 Station Tool Changer
80 PSI Air pressure required. Max Tool Dia: … 3.0”
Max tool weight … 10 lbs. each ATC Time chip to chip 5-7 seconds
Air Dryer and lubricator – (Low air message) Low oil will stop all machine operations
Spindle inverter w/R21i: ….. Delta
Spindle Motor HP: 7.5 HP 9 KVA 30 amp
Feed motors: ….. R21i Delta AC Motors & Drives Fanuc Control uses all Fanuc hardware
Axis Motor Size: … R21i XY = .75kW Z = 1kW Fanuc Motors XY = 1kw Z = 2kw
Coolant pump: …… 1/8 HP
Lubrication pump: ….. Automatic with Low Lube alarm and automatic system halt
Power requirement: ….. 3 Phase 208-230 VAC 9 KVA
Width x Depth x Height (WxDxH): ….. 110” x 105” x 100”
Machine weight: ….. 5,250 lbs.
Follow the links provided in RED for detailed information on all of our CNC controls.
[ Remedy R21i Industrial Control w/Centroid Software ]
[ Fagor CNC 8055i MC ]
[ Fanuc Oi-Model F ]
Control Highlights for a quick review
Fagor CNC 8055i MC
The Fagor 8055i CNC control combines value and reliability with a featured packed compact industrial hardened control. Fagor controls are shop hardened with Fagor’s very powerful operating system consists of 2 systems within 1 control. Very easy to program Icon Key based conversational system or a Conventional Fanuc style G-code programming system. Fagor’s “Icon Key” programming simplifies programming. Graphic assist in all programming screens enabling “true” fill in the blank programming. The Alpha numeric keyboard has color coded keys to easy programming. 10.4 inch color LCD.
Learn more by following this link to [Fagor Control] data
Fanuc Oi-Model F:
All Fanuc controls are recognized as the world wide standard as rugged and the highest quality CNC controls available with over 700,000 system sold. Fanuc controls are reliable, faster and offer accurate performance to a wide range of milling, turning, robot applications. Fanuc reliability provides the lowest cost of ownership. Controls with Fanuc spindle Drives and matching motors build our complete machine control system. Fanuc is the industry’s most reliable CNC Control system. Fanuc’s advanced drive systems provide highly accurate linear and circular and helical interpolation for high speed machining. 11″ color LCD, 1 MB flash RAM / 512 MB CF Memory, 4th Axis Drive ready.
Learn more by following this link to [Fanuc Control] data
Table Vice brands: GSV, TE-CO, Kurt – and some other brands. We recommend you purchase on quality not price.
Remedy supports all brands of work holding fixturing and the machine table has (3) T-Slots. Double vice or
quick table clamping systems like Erowa and 3R can assist in production machining setups
[ CAT40 TOOLING ] Optional Tooling kit: -More tooling packages –
CAT- 40TP – – CAT-40 Tooling: 1-21
- CK-001 52 Piece Table clamping kit 5/8 ½-13:
- CAT40 Tool Set: (1 each) 1/4, 5/16, [2 x 3/8],[2 x ½], 5/8, ¾, (8 tools):
- B-CAT40-KD… 3/8” Key type Drill chuck on a CAT40 JT3 Tool…(2 Pieces):
- GSVice … 6” GSV Solid fixed Machining Vice:
- Shipping tooling from multiple vendors to Remedy for delivery with your machine:
Tooling Total: $2,160.00
Training Options: 100 mile radius of Phila., PA
- REM-MSU Remedy machine set up and warranty validation/start – without training needed: $1,500.00
- RSU-VTP Set up & warranty start – 90 days access to our Centroid video training program: $1,500.00
Video training is available for Centroid and Fagor controls only.
- IHT-NATC In House Training (2 days) 5 hour day training & travel Non ATC Mills: $2,250.00
- IHT-ATC In House Training (3 days) 5 hour day training & travel for ATC Mills: $3,350.00
- XIHT Additional days of in house training or future training dates: $850.00
Note: Remedy Set up & Installation is not training, Training is additional as listed above.
Training is required for your first Remedy Machine only.
Remedy set up installation is required for our machine warranty to be validated at start up.
Outside of area training, additional travel charges will be quoted to your location.
Remedy ATM 1454II Rigid Head ATC Bed Mill
Features:
- 26” Full CNC Z axis operation and the stability of a
rigid head - 7.5 HP Spindle Motor, CAT 40 Taper Spindle.
- The head is counter balanced with a solid weight
and dual chains - 20-6000 RPM Programmable spindle
- Hardened & Ground w/ Turcite-B coating on all
ways - Heavy Duty C5 Precision Ground Double nut ball
screws, have higher accuracy and better
repeatability - Heavy FC30 Meehanite Casting Base, Column and
Head - Dovetail X and Box Y&Z way design for smooth
movement and higher repeatability - Way covers on all three axes
- Automatic lubrication system with Low lube alarm
- LED work lamp has lower heat
- Programmable coolant system
P.O.R.
Table size: …………………… 14 x 54” with (3) T-slots
Longitudinal travel: (X axis) ….. 40”
Cross travel (Y axis): …………………. 22.4”
Z Axis Head travel: ………………….… 26.75”
Rapid Feed Rate: (X,Y,Z): ……….. 250 ipm
Machining feed rate: ……….… 0.2 – 225 ipm
Spindle nose to table top: …. 1.3” – 25.4”
Table Load capacity: …………..… 950 lbs.
Spindle taper: ……. CAT40
Spindle RPM: ….. 50 – 6,000 RPM One gear range
Transmission of spindle & motor: ….. Belt
Fixed and rigid head with all ATC Machines
CAT40 Tooling – Standard Pull stud required for ATC
50 – 6,000 RPM Spindle
Rigid tapping
ATC Data – 12 Station Tool Changer
80 PSI Air pressure required. Max Tool Dia: … 3.0”
Max tool weight … 15 lbs. each ATC Time chip to chip 7-9 seconds
Air Dryer and lubricator – (Low air message) Low oil will stop all machine operations
Spindle inverter w/R21i: ….. Delta
Spindle Motor HP: ….. 7.5 HP 9 KVA 30 amp
Feed motors: ……………. Delta AC Motors & Drives or Fanuc Motors & Drives
Axis Motor Size: ………… XY = .75kW Z = 1kW
Coolant pump: ……….. 1/8 HP
Lubrication pump: ….. Automatic
Power requirement: ….. 3 Phase 208-230 VAC 9 KVA
Width x Depth x Height (WxDxH): …… 125” x 105” x 100”
Machine weight: …….. 7,250 lbs.
Follow the links provided in RED for detailed information on all of our CNC controls.
GSV, TE-CO, Kurt – and all other types.
Remedy supports all brands of work holding fixturing and the machine table has (3) T-Slots
TOOLING Optional Tooling kit: -More tooling packages –
CAT- 40TP – – CAT-40 – – Tooling: 1-21
- CK-001 52 Piece Table clamping kit 5/8 ½-13:
- CAT40 Tool Set: (1 each) 1/4, 5/16, [2 x 3/8],[2 x ½], 5/8, ¾, (8 tools):
- B-CAT40-KD… 3/8” Key type Drill chuck on a CAT40 JT3 Tool…(2 Pieces):
- GSVice … 6” GSV Solid fixed Machining Vice:
- Shipping tooling from multiple vendors to Remedy for delivery with your machine:
Tooling Total: $2,160.00
Remember to Add these items to complete your machine package.
Shipping, Rigging, Installation, Training, Software upgrades and Tooling.
Part.# HARDWARE OPTIONS – ATC Machines – Check availability to your machine configuration 1-21
-
A20ATC-CAR .. Carousel armless 24 Station ATC (Factory install only) Standard*
-
A30ATC-SW.. Change to Swing Arm 24 Station ATC (Factory Upgrade only) $ 6,900.00*
-
C40-RK Retention Knob set for carousel ATC Machines 24 Piece Set… ($20.50 ea.) $ 500.00
-
FE-CA Upgrade to Full enclosure and screw type chip auger ……Factory Order only $ POR
-
AM-CC1 Upgrade from screw type chip auger to chain type chip conveyor $ 3,900.00
-
HP-20 Upgrade to 20 HP spindle motor at 8000 RPM $ 1,750.00*
-
CP-SP Through the Spindle Coolant (Factory upgrade and special tooling required) $ 8,200.00
-
C40-RK-SC/24 Retention Knob set for Through Spindle cooling ATC Machines 24 Piece Set $585.00
-
AM-Oil-S Oil Skimmer Mounted inside the base of the machine with external exhaust $ 1,000.00*
-
CC-AC Control Cabinet AC-Chiller for hot air temperature shop locations.. (Above 80 degrees) $ 1,800.00*
-
AM-MST Auto Mist system with Flexible nozzlewith Programmable Coolant System $ 775.00
* Items are recommended to be factory installed
DIGITIZING & PROBING Centroid only
-
10220 TT 1 Tool Length Touch Off Kit w/software (added 3 hrs. Training $ 380.00) $ 1,125.00
-
10405 DP 4 Probe Centroid Probing cycles; 6 types for settings fixtures and tool offsets and CRS #10850... (added is 4 hrs. Probe Training $ 600.00) $ 2,400.00
-
10770 DP 4 Centroid Digitizing software w/all Surface probe, multiple patch, and grid type... (Includes:10405 probe, Unlimited file size, Mold Magic Software and Training $ 850.00) $ 5,950.00
-
10772 Toolroom Pkg: DP4 Probing & TT1 Tool Setter & WCS (Training $ 750.00) $ 3,200.00
Machine and Control Training: Training Options: 100 mile radius of Phila., PA
-
REM-MSU Remedy machine set up and warranty validation/start - without training needed $ 1,500.00
-
RSU-VTP Set up warranty start – 90 days access to our Centroid video training program $ 2,000.00
Video training is available for Centroid and Fagor controls only
-
IHT-NATC In House Training (2 days) 5 hour day training & travel Non ATC Mills $ 2,250.00
-
IHT-ATC In House Training (3 days) 5 hour day training & travel for ATC Mills $ 3,350.00
-
XIHT…….. Additional days of in house training or future training dates $ 850.00
Call us for a detailed quotation, and get more details of our: Tooling packages, training, shipping, rigging and the machine features that you may want. Have a salesman call to discuss our complete machine package specials.
Our quotes will give you all the details
Shipping, rigging, tooling and all of the other options.
Request one today!