EDM-250
Main Features:
Base Price: ….. $ 15,750
- Rigid floor standing machine w/ a cast iron base & column
- Easy to use controls and easy to use ECEDM Manuals
- Programmable Z axis machining depth
- 16” Z axis travels – EDM 8” and Backslide 8”
- X & Y axes ballscrews for smooth and accurate positioning
- Linear scales for XYZ DRO position display
- Edge finder: X,Y,Z axis beeper
- Automatic DC Arc Protection
- Dielectric Oil storage in the base of the machine
- Easy change filters
- Compatible to all EDM tooling brands
- Dual worktank doors for easy part access
- Standard: Fire suppression system & work lamp
Technical Data
Power Supply
Technical Data
- Travels (X,Y,Z& Backslide): …. 9,8 x 8.0 x 8 x 8 inch
- Worktank size (W,D,H): … 48 x 39.5 x 18
- Table size: 18 x 11”
- Z axis throat: ………. 5 – 23”
- DC Servo drive Z axis for stable and accurate machining
- Electrode max weight: ……….. 40 lbs.
- Workpiece max weight: ……….. 440 lbs.
- Machine weight: ……………….. 2,200 lbs.
- Machine area (W,D,H): … 55 x 59 x 83
Automatic Z Axis Machining & EDM Power Setting Changing - Dielectric capacity: ……… 50 gallons
- Filter Type: … Easy change cartridge
Power Supply
Power Requirement: …… 220 VAC 3 Ph. 4 KVA
HVT-322
Main Features:
Base Price: …$ 39,550
- Rigid floor standing machine w/ a cast iron base & column
- Easy to use controls and Hansvedt Manual set
- Programmable Z axis machining depth with hi speed servo
- 16” Z axis travels – EDM 8” and Backslide 8”
- X & Y axes ballscrews for smooth and accurate positioning
- X & Y axis Ball ways
- XYZ interactive DRO position display
- Edge finder: X,Y,Z axis beeper
- Automatic DC Arc Protection
- Dielectric Oil storage in the base of the machine
- Easy change filters
- Compatible to all EDM tooling brands
- Dual worktank doors for easy part access
Technical Data
Power Supply
Technical Data
- Travels (X,Y,Z& Backslide): … 11.8 x 8.0 x 8.0 x 8.0”
- Worktank size (W,D,H): ……….. 32.7 x 19.7 x 11.8”
- Table size: ……………………… 26.6 x 11.8”
- Z axis throat: …………………… 7.5 to 23.25
- DC Servo Z axis drive for stable and accurate machining
Automatic Z Axis Machining with Power setting changing - Electrode max weight: ……….. 125 lbs.
- Workpiece max weight: ……….. 1,225 lbs.
- Machine weight: ……………….. 2,350 lbs.
- Machine area (W,D,H): … 61 x 63 x 86”
- Dielectric capacity: ……… 64 gallons
- Filter Type: … Easy change cartridge
- Tooling: 3R, Erowa, Hirschman and many others.
- DI Tank size: (W x D) … 20 x 40”
DI Tank is not shown in this picture
Power Supply
- AZDR: 50 amp programmable power supply with DRO Display: 7 Segment LED
- Programmable EDM settings: Peak current, On-time, Off time, Servo Speed, Electrode Polarity, and Gap spacing. Use Graphite or metallic electrodes.
- Programmable operations: Z axis cut depth, Ram cycle (Jump), Flushing
- Power Requirement: …………. 220 VAC 3 Ph. 5 KVA
- Weight: ……… 400 lbs.
- Power supply area: ………….. 23 x 29 x 68”
- Standard: Fire suppression system, Work lamp, Toolbox, Leveling pads and Flushing nozzle set.
HVT-430/75a
Main Features:
Base Price: …$ 42,600
- Rigid floor standing machine w/ a cast iron base & column
- Easy to use controls and Hansvedt Manual set
- Programmable Hi speed Auto Z axis machining depth
- 16” Z axis travels – EDM 8” and Backslide 8”
- X & Y axes ballscrews for smooth and accurate positioning
- X & Y axis Ball ways
- XYZ interactive DRO position display
- Edge finder: X,Y,Z axis beeper
- Automatic DC Arc Protection
- Dielectric Oil storage in the base of the machine
- Easy change filters
- Compatible to all EDM tooling brands
- Dual worktank doors for easy part access
Technical Data
Power Supply
Technical Data
- Travels (X,Y,Z& Backslide): … 15.8 x 11.8 x 8.0 x 8.0”
- Worktank size (W,D,H): ………. 42 x 23.5 x 13.3”
- Table size: …………………… 28.6 x 15.8”
- Z axis throat: …………………… 8 to 25.9
- DC Servo Z axis drive for stable and accurate machining
- Electrode max weight: ……….. 200 lbs.
- Workpiece max weight: ……….. 2,000 lbs.
- Machine weight: ……………….. 3,850 lbs.
Automatic Z Axis Machining with Power Setting Changing - Machine area (W,D,H): … 115 x 66 x 86”
- Dielectric capacity: ……… 90 gallons
- Filter Type: … Easy change cartridge
- Tooling: 3R, Erowa, Hirschman and many others.
- DI Tank size: (W x D) … 30 x 40”
DI Tank is not shown in this picture
Power Supply
- AZDR: 75 amp power supply
- Large LCD Display: 7 Segment LED
- Power Requirement: …… 220 VAC 3 Ph. 5 KVA
- Weight: ……… 450 lbs.
- Standard: Fire suppression system, Work lamp, Toolbox, Leveling pads and Flushing nozzle set.
HVT-500/100a
Main Features:
Base Price: …$ 52,700
- Rigid floor standing machine w/ cast iron base& column
- Easy to use controls and Hansvedt Manual set
- Programmable Z axis machining depth with hi speed servo
- 16” Z axis travels – EDM 8” and Backslide 8”
- X & Y axes ballscrews for smooth and accurate positioning
- X & Y axis Ball ways
- XYZ interactive DRO position display
- Edge finder: X,Y,Z axis beeper
- Automatic DC Arc Protection
- Dielectric Oil storage in the base of the machine
- Easy change filters
- Compatible to all EDM tooling brands
- Dual worktank doors for easy part access
Technical Data
Power Supply
Technical Data
- Travels (X,Y,Z& Backslide): … 15.8 x 11.8 x 8.0 x 8.0”
- Worktank size (W,D,H): ……….. 49 x 26 x 16.5”
- Table size: ……………………… 29.5 x 20.5”
- Z axis throat: …………………… 8 to 25.9
- DC Servo Z axis drive for stable and accurate machining
- Electrode max weight: ……….. 330 lbs.
- Workpiece max weight: ………. 2,600 lbs.
Automatic Z Axis Machining with Power setting changing - Machine weight: ……………….. 4,750 lbs.
- Machine area (W,D,H): … 130 x 75 x 97”
- Dielectric capacity: ……… 150 gallons
- Filter Type: … Easy change cartridge
- Tooling: 3R, Erowa, Hirschman and many others.
- DI Tank size: (W x D) … 37 x 55”
DI Tank is not shown in this picture
Power Supply
- AZDR: 100 amp power supply
- DRO Display: 7 Segment LED
- Power Requirement: 220 VAC 3 Ph. 6 KVA
- Weight: 450 lbs.
- Standard: Fire suppression system, Work lamp, Toolbox, Leveling pads and Flushing nozzle set
HVT-650/100a
Main Features:
Base Price: …$ 59,750
- Rigid floor standing machine w/ cast iron base & column
- Easy to use controls and Hansvedt Manual set
- Programmable Z axis machining depth with a high speed servo system
- 16” Z axis travels – EDM 8” and Backslide 8”
- X & Y axes have ballscrews for smooth and accurate work part positioning
- X & Y axis Ball ways for smooth positioning
- XYZ interactive DRO position display
- Edge finder: X,Y,Z axis beeper
- Automatic DC Arc Protection
- Dielectric Oil storage in the base of the machine
- Easy change filters
- Compatible to all EDM tooling brands
- Dual work tank doors for easy part access
Technical Data
Power Supply
Technical Data
- Travels (X,Y,Z& Backslide): … 23.6 x 19.7 x 11.0 x 11.0”
- Worktank size (W,D,H): ……….. 49 x 26 x 16.5”
- Table size: ……………………… 36 x 23”
- Z axis throat: …………………… 9 to 31
- DC Servo Z axis drive for stable and accurate machining
- Electrode max weight: ……….. 660 lbs.
- Workpiece max weight: ……….. 4,500 lbs.
- Machine weight: ……………….. 7,100 lbs.
- Machine area (W,D,H): … 200 x 95 x 97”
- Dielectric capacity: ……… 200 gallons
- Filter Type: … Easy change cartridge
- Tooling: 3R, Erowa, Hirschman and many others.
- DI Tank size: (W x D) … 51 x 80”
DI Tank is not shown in this picture
Power Supply
- AZDR: 100 amp power supply
- DRO Display: 7 Segment LED
- Programmable EDM settings: Peak current, On-time, Off time, Servo Speed, Electrode Polarity, and Gap spacing. Use Graphite or metallic electrodes.
- Programmable operations: Z axis cut depth, Ram cycle (Jump), Flushing
- Power Requirement: 220 VAC 3 Ph. 6 KVA
- Weight: ……… 450 lbs.
- Standard: Fire suppression system, Work lamp, Toolbox, Leveling pads and Flushing nozzle set.
Shipping, rigging, tooling, Digital Read outs (DRO) and all of the option details are listed in our full quotations. Request one today!
EDM Purchase Terms:(Link all CNC EDM Terms Here)
All Hansvedt/Joemars EDM Machines are F.O.B. – Hansvedt Urbana, IL
Knuth EDM Machinesare F.O.B. – Chicago, IL
Availability – Call for our latest stock list as it changed daily
Shipping –The machines, oil and tooling are normally shipped to Remedy, Then our rigger will bring the machine to you.
Rigging – Remedy will provide you accurate pricing specifically for your purchase. Pricing varies because of machine size and weight.
Payment– 40% deposit with order, Balance due Net 10 days from delivery to your facility.
Remedy will be available to complete the installation and training before that time.
Should the customer require installation delays 90% payment is due at 10 days.
Taxes – Federal are included, any state or local taxes are the responsibility of the purchaser.
Some states and/or counties have local tax’s and we cannot be liable for these.
Installation & Training – Hansvedt has included these items into the base price of their machinery.
This is only valid with Hansvedt machinery, not Knuth EDM machines.
Remedy will do your Knuth EDM installation and training.
Warranty – 12 Months limited warranty for any defects in material or workmanship of the machine tool, power supply, control and all factory installed items.
Validity – Remedy EDM Proposals are valid for 30 days. All specifications are copied from factory literature and they are deemed correct.