Machining Centers

R21i, Fagor & Fanuc controls are available.
Soon we will have Anilam Controls

Remedy 2418 Machining Center w/ATC and Chip auger

Technical Data

  • Table size: …………..   27.5 x 17.7” with (3) T-slots
  • Longitudinal travel (X axis): …. 24”
  • Cross travel (Y axis): …………………. 18”
  • Z Axis Head travel: …………………..  19”
    ATC Swing Arm …………………………. 24 Tools
  • Rapid Feed Rate: X,Y,Z: R21i = 35o  Fanuc: = 945 ipm 
  • Machining feed rate: ……..  0.2 – 325 ipm
  • Spindle nose to table top: …… 5.5” – 24.5”
  • Load capacity: …………………………..  660 lbs.
  • Spindle taper: …………………………    CAT40             
  • Spindle RPM: … 60 – 8000 RPM One gear range
  • Transmission of spindle & motor: …  Belt
  • Spindle center to column front surface: 19.7″
  • Metal Way covers on all three axes.
  • Automatic lube system w/Low lube alarm.
  • Built in LED work lamp has lower heat.
  • Programmable coolant system.

Remedy VMC 2035 Machining Center

Technical Data:

  • Table size – 43.3 x 20.5” with (3) T-slots
  • Longitudinal travel (X axis) – 35.4”
  • Cross travel (Y axis) – 20.4”
  • Z Axis Head travel – 22.0”
  • Rapid Feed Rate –  X,Y,Z: Cen = 355 Fanuc 945 ipm 
  • Machining feed rate – 0.2 – 325 IPM
  • Spindle nose to table top – 4.7” – 26.7”
  • Load capacity – 1,300 lbs.
  • Spindle taper – CAT40 
  • Spindle RPM – 10000 RPM (12/18/24000 RPM)
  • Transmission of spindle & motor – Belt
  • Spindle center to column front surface 22.4
  • Metal Way covers on all three axes.
  • Automatic lube system with Low lube alarm.
  • Built in LED work lamp has lower heat.
  • Programmable coolant system.

Remedy VMC 2243 Machining Center

Features:

  • Table size – 47.25 x 23.6” with (3) T-slots
  • Longitudinal travel (X axis) – 43.3”
  • Cross travel (Y axis) – 23.6”
  • Z Axis Head travel – 24.0”
  •  Rapid Feed Rate –  X,Y,Z: Cen = 355 Fanuc 945 ipm
  • Machining feed rate – 0.2 – 325 IPM
  • Spindle nose to table top – 4.9” – 28.5”
  • Load capacity – 2.100 lbs.
  • Spindle taper – CAT40
  • Spindle RPM – 10000 RPM (12/18000 RPM)
  • Transmission of spindle & motor – Belt
  • Spindle center to column front surface 22.4
  • Metal Way covers on all three axes.
  • Automatic lube system with Low lube alarm.
  • Built in LED work lamp has lower heat.
  • Programmable coolant system.

Remember to Add these items to complete your machine package.

Shipping, Rigging, Installation, Training, Software upgrades and Tooling.

 

Part.#HARDWARE OPTIONS  –  ATC Machines –  Check availability to your machine configuration 1-20

  • A24ATC-CAR ..  Carousel armless 24 Station ATC (Factory install only):  $ Standard*
  • A24ATC-SW..  Change to Swing Arm 24 Station ATC (Factory Upgrade only):  $6,900.00*
  • A30ATC-SW..  Change to Swing Arm 24 Station ATC (Factory Upgrade only):  $8,900.00*
  • C40-RK  Retention Knob set for carousel ATC Machines 24 Piece Set… ($20.50 ea.):  $500.00
  • FE-CA Upgrade to Full enclosure and screw type chip auger:  $6,800.00
  • AM-CC1  Upgrade from screw type chip auger to chain type chip conveyor: $3,900.00
  • HP-20  Upgrade to 20 HP spindle motor at 8000 RPM:  $1,750.00*
  • SS-10  Cat 40 Spindle speed increase to 10,000 RPM with liquid chiller:  $5,750.00*
  • CP-SP  Through the Spindle Coolant (Factory upgrade and special tooling required):  $8,200.00
  • C40-RK-SC/24  Retention Knob set for Through Spindle cooling ATC Machines 24 Piece Set:  $585.00
  • AM-Oil-S  Oil Skimmer Mounted inside the base of the machine with external exhaust:  $1,000.00*
  • CC-AC  Control Cabinet AC-Chiller for hot air temperature shop locations.. (Above 80 degrees):  $1,800.00*
  • AM-IDS  Front door safety interlock switch hard & software (OSHA Requirement in some locations):  $400.00*
  • AM-CG  External Coolant gun for machine washing chip wash down:  $500.00*
  • AM-MST   Auto Mist system with Flexible nozzlewith Programmable Coolant System:  $775.00
  • K3-Trans…High voltage Transformer 440/480 to 220 VAC, 28 KVA:  $3,600.00

* Items are recommended to be factory installed

      

 

Training Options: 100 mile radius of Phila., PA

  • REM-MSU   Remedy machine set up and warranty validation/start – without training needed:  $Included
  • IHT-NATC  In House Training (2 days) 5 hour day training & travel Non ATC Mills (Centroid):  $2,250.00
  • IT-ATC  In House Training (3 days) 5 hour day training & travel for ATC Mills…(Centroid):  $3,000.00
  • ITF-ATC  Install& In House Training (2 days) 5 hour day training & travel for ATC Mills…(Fanuc):  $2,750.00
  • IHG-ATC  Install &In House Training (3 days) 5 hour day training & travel for ATC Mills…(Fagor):  $3,750.00

Note:
Training is required for your first Remedy Machine only.

Remedy set up installation is required for our machine warranty to be validated at start up.

Outside of area training, additional travel charges will be quoted to your location.

                                                                                                                                     

TOOLING NOTES:
You can see more tooling details on our tooling page.

ATC Tooling – BT  or  CAT sizes. Your ATC can be adjusted to fit either tool size.

We are only listing CAT taper tooling in our tooling packages here.

See our website tooling section for more tooling kit options.

The item prices are shown so that it is easy for you to add, subtract, or double up on any item.

See our website tooling section for more tooling kit options.

The item prices are shown so that it is easy for you to add, subtract, or double up on any item.

Remedy Machining Center Purchase terms.

All Remedy Machining Centers are F.O.B. – Southampton, PA.

We will load your truck or trailer at No Charge daily or weekends.
Please note that pick up machinery terms are always prepaid, and you must have proper tie down materials.

Knuth Machining Centers are F.O.B. Chicago

Availability
Call for our latest stock list as it changed often and some larger machines need to be ordered.

Shipping
The machines, oil and tooling are normally shipped to Remedy, Then our rigger will bring the machine to you.

Rigging
Remedy will provide you accurate pricing specifically for your purchase.

Pricing varies because of machine size and weight.

Payment
40% deposit with order, Balance due Net 10 days from delivery to your facility.

Remedy will be available to complete the installation and training before that time.

Should the customer require installation delays 90% payment is due at 10 days.

Larger or custom orders will have a 3 payment schedule, call for details

Taxes
Federal are included, any state or local taxes are the responsibility of the purchaser.

Some states and/or counties have local tax’s and we cannot be liable for these.

Training
Remedy offers in depth and detailed in-house training for all new customers.  We also have video training available here in our website.  Customers purchasing a second or more machine tool, may not require more training and this is one reason training is an optional item.  If additional training is needed we will work with you to create a customized package specifically to fit your needs.                                              

Warranty
12 Months limited warranty for any defects in material or workmanship of the machine tool and all factory installed items. 24 months on R21i controls and inverter hardware

Validity
Remedy Machine Proposals are valid for 30 days.  All specifications are copied from factory literature and they are deemed correct.

* WE RESERVE THE RIGHT TO CHANGE DESIGN, COLOR, SPECIFICATIONS, OR PRICE WITHOUT NOTICE *

* All pricing is valid 1-2021 please refer to our quotations for all updates to specifications and  pricing. *