Remedy 3416S Manual Spindle Speed Knee Mill

Main Features:
- 3 HP Manual Vary Speed Spindle
- 60-4500 RPM Infinitely variable
- 10 x 50” Table Bridgeport style knee mill
- Hardened & ground table and saddle with Turcite-B coated ways
- Double nut precision acme lead screws
- R8 Taper spindle
- Box ways on Y axis for heavy machining
- Precision APEC spindle bearings to ensure run out is less than 0.0002″
- Meehanite cast frame annealed and stress relieved for long term stabilization
- Anti-Rust chromed quill
- Way covers on table & knee axes (Not shown here)
- Manual One shot lubrication system
- Tool box, hand cranks, and touch up paint
- (Options) DRO, PDB, Chip guards, Work lamp, Tooling Pkg. with tooling tray
- P.O.R.
Table size – 10 x 50” with (3) T-slots
Longitudinal travel (X axis) – 34”
Cross travel (Y axis) – 16”
Manual quill travel – 5″ Manual Z axis Quill
Knee travel (manual) – 16”
Quill diameter – 3 3/8” Mill Head:
Quill feeds – 0.0015, 0.003, 0.006”
Spindle nose to table top – 0.75”-16.75”
Tilt: (front/back) – 45°
Swivel Head Design: (Left/Right) – 90°
Spindle taper – R8 or (Optional NST30 Taper)
Spindle RPM – 60-1200 & 1000-4500 RPM Hi/Lo gear
Table Load capacity – 850 lbs.
Transmission of Power – Belt, Motor to Spindle: 3 HP
Spindle center to column front surface – 3.9 – 28.6”
Ram travel – 18”
Coolant pump (optional) – 1/8 HP
Lubrication pump – Manual 1 shot
Power requirement – 3 Phase 208-230 volt. 4 Kva 15 amps
Machine weight – 3,100 lbs.
Width x Depth x Height (WxDxH) – 95” x 75” x 90”
5 inch Manual Z axis Quill
Tilt: (front/back) – 45°
Swivel Head Design: (Left/Right) – 90°
Motor HP – 3 HP 4 KVA 15 amps
Coolant pump (optional) – 1/8 HP
Lubrication pump – Manual 1 shot
Power requirement – 3 Phase 208-230 voltage
Click to see: [Table Tooling Options]
Normally customers use a machine vice, Strap clamps or you many other choices that fit for your specific work
Click to see our tooling packages: [ R8 Tooling ] – [ 30 Taper tooling ]
We recommend solid R8 tool holders or you can always use R8 spring collets
Shipping, rigging, tooling, Digital Read outs (DRO) and all of the option details are listed in our full quotations, or use our build a quote page for more information.
Check out our -Easy payment plans- in our Easy finance program.
Remedy 3416 Inverter Controlled Spindle Knee Mill

Main Features:
- 3 HP Inverter Vary Speed Spindle (LCD – RPM)
- 60-4500 RPM Infinitely variable
- 10 x 50” Table Bridgeport style knee mill
- Hardened & ground table and saddle with Turcite-B coated ways
- Double nut precision acme lead screws
- R8 Taper spindle (Optional NST#30)
- Box ways on Y & Z axes for heavy machining
- Precision APEC class 7207 spindle bearings to ensure less than 0.0002” run out.
- GA-50 Meehanite cast frame annealed and stress relieved for long term stabilization
- Anti-Rust chromed quill
- Way covers on table & knee axes (Not shown)D
- Manual One shot lubrication system
- Tool box, hand cranks, and touch up paint
- (Options) DRO, PDB, Chip guards, Work lamp, Tooling Pkg. with tooling tray
- P.O.R.
Longitudinal travel (X axis) – 34”
Cross travel (Y axis) – 16”
Manual quill travel – 5”
Knee travel (manual) – 16”
Quill diameter – 3 3/8”
Quill feeds – 0.0015, 0.003, 0.006”
Spindle nose to table top – 0.75”-16.75”
Load capacity – 850 lbs.
Spindle taper – R8 or (Optional NST30 Taper)
Spindle RPM – 60-1200 & 1000-4500 RPM Hi/Lo gear
Transmission of Power – Belt, Motor to Spindle: 3 HP
Spindle center to column front surface – 3.9 – 28.6”.
Ram travel – 19”
Width x Depth x Height (WxDxH) – 95” x 75” x 90”
Machine weight – 3,500 lbs.
5 inch Manual Z axis Quill
Swivel Head Design: (Left/Right) – 90°
Tilt: (front/back) – None
Motor HP: 3 HP 4 KVA 15 amps
Coolant pump (optional) – 1/8 HP
Lubrication pump – Manual 1 shot (optional Auto)
Power requirement – 3 Phase 208-230 voltage
Click to see: [ Table Tooling Options ]
Normally customers use a machine vice, Strap clamps or you many other choices that fit for your specific work
Click the tooling size you want to see: – R8 Tooling – – 30 Taper tooling –
We recommend solid R8 tool holders or you can always use R8 spring collets – Consider 30 Taper and it’s advantages
Shipping, rigging, tooling, Digital Read outs (DRO) and all of the options details are listed in our full quotations, or check out our tooling page for more information.
Check out our -Easy payment plans- in our Easy finance program.
Remedy 3616 Inverter Controlled Spindle Speed Knee Mill

Main Features:
- 3 HP Manual Vary Speed Spindle
- 60-4500 RPM Infinitely variable
- 10 x 54” Table Bridgeport style knee mill
- Hardened & ground table and saddle with Turcite-B coated ways
- Double nut precision acme lead screws
- R8 Taper spindle (Optional NST#30)
- Box ways on Y & Z axes for heavy machining
- Precision APECclass 7207 spindle bearings to ensure less than 0.0002” run out.
- GA-50 Meehanite cast frame annealed and stress relieved for long term stabilization
- Anti-Rust chromed quill
- Way covers on table & knee axes
- Manual One shot lubrication system
- Tool box, hand cranks, and touch up paint
- (Options) DRO, PDB, Chip guards, Work lamp, Tooling Pkg. with tooling tray
- P.O.R.
Table size – 10 x 54” with (3) T-slots
Longitudinal travel (X axis) – 36.5”
Cross travel (Y axis) – 17.3”
Manual quill travel – 5”
Knee travel (manual) – 19”(Power Option)
Quill diameter – 3 3/8”
Quill feeds – 0.0015, 0.003, 0.006”
Spindle nose to table top – 2.4”-21.1”
Load capacity – 850 lbs.
Spindle taper – R8 or (Optional 30 Taper)
Spindle RPM – 60-1200 & 1000-4500 RPM Hi/Lo gear
Transmission of Power – Belt, Motor to Spindle: 3 HP
Spindle center to column front surface – 3.5 – 25.2”
Ram travel – 19”
Width x Depth x Height (WxDxH) – 95” x 75” x 90”
Machine weight – 3,500 lbs.
5″ Manual Z axis Quill
Swivel Head Design: (Left/Right) – 90°
Tilt: (front/back) – 45°
Spindle Motor HP: 3 HP 4 KVA 15 amps
Coolant pump (optional) – 1/8 HP
Lubrication pump – Manual 1 shot (optional Auto)
Power requirement – 3 Phase 208-230 VAC
Click to see: [ Table Tooling Options ]
Normally customers use a machine vice, Strap clamps or you many other choices that fit for your specific work
Click the see our tooling packages: [ R8 Tooling ] – [ 30 Taper tooling ]
We recommend solid R8 tool holders or you can always use R8 spring collets – Consider 30 Taper and it’s advantages
Shipping, rigging, tooling, Digital Read outs (DRO) and all of the options details are listed in our full quotations, or check out our tooling page for more information.
Check out our -Easy payment plans- in our Easy finance program.
Remedy 4716 Inverter Controlled Spindle Speed Knee Mill

Main Features:
- 5 HP Manual Vary Speed Spindle
- 60-4500 RPM Infinitely variable
- 11.5 x 59” Table Bridgeport style knee mill
- Hardened & ground table and saddle with Turcite-B coated ways
- Double nut precision acme lead screws
- CAT40 Taper spindle (Optional NST#40)
- Box ways on Y & Z axes for heavy machining
- Precision APECclass 7207 spindle bearings to ensure less than 0.0002” run out.
- GA-50 Meehanite cast frame annealed and stress relieved for long term stabilization
- Anti-Rust chromed quill
- Way covers on table & knee axes
- Manual One shot lubrication system
- Tool box, hand cranks, and touch up paint
- (Options) DRO, PDB, Chip guards, Work lamp, Tooling Pkg. with tooling tray
- P.O.R.
Table size – 11 x 59” with (3) T-slots
Longitudinal travel (X axis) – 47.25”
Cross travel (Y axis) – 15”
Manual quill travel – 5”
Knee travel (manual) – 19.75
Quill diameter – 4.0”
Quill feeds – 0.0015, 0.003, 0.006”
Spindle nose to table top – 3.5”-22.5”
Load capacity – 1,000 lbs.
Spindle taper – Cat40 or (Optional NST40 Taper)
Spindle RPM – 60-1200 & 1000-4500 RPM Hi/Lo gear
Transmission of spindle & motor – Belt
Spindle center to column front surface – 3.5 – 25.2”
Ram travel – 19”
Width x Depth x Height (WxDxH) –110” x 90” x 95”
Machine weight – 4,900 lbs.
5 inch Manual Z axis Quill
Swivel Head Design: (Left/Right) – 90°
Tilt: (front/back) – None
Motor HP: 5 HP 5.5 KVA 20 amps
Coolant pump (optional) – 1/8 HP
Lubrication pump – Manual 1 shot (optional Auto)
Power requirement – 3 Phase 208-230 voltage
Click to see: [ Table Tooling Options ]
Normally customers use a machine vice, Strap clamps or you many other choices that fit for your specific work.
Larger machines often have (2) vices on the table.
Shipping, rigging, tooling, Digital Read outs (DRO) and all of the options details are listed in our full quotations, or check out our tooling page for more information.
Check out our [ Easy payment plans ] in our Easy finance program.

Remedy Replacement Heads
When you have a tired or old machine where the spindle and head are worn out and noisy. You can have it rebuilt, waiting weeks for the unit to be removed, rebuild and then returned.
You lose production time and may have unhappy customers because of late deliveries. Additionally, it seems to be the fact that a rebuilt head does not last as long as a new unit. Does it seem that the each time you rebuild that old head, it seem to last less time. Does your rebuilder have all of the technology to do the job right?
DON’T REBUILD, replace that old head with a completely brand new head !
Get the quality of new, and have your machine running in tip top shape day one! Get the advantage of unlimited spindle speed changing with the twist of a knob.
We can bring the unit to your facility and have you running in 1 day. We can ship it to you so that you can install it. WOW – Our unit comes pre-wired for easy installation.
Remedy heads come in R8 or 40 taper spindle types so you can continue to use the tooling that you already have in your shop.
Do yourself a favor, Replace – don’t rebuild ever again. Call today to get all of the details, pricing, installation notes and delivery.
Call Remedy now, we have the “cure” for you troubled Manual or CNC Mill.
We always want to work with our customers so that we customize our quotation to you. Shipping: You may wish to pick up your new machine from our facility, or have one of our riggers deliver and place it into your facility. Digital read outs: (DRO) the most often requested item, we have many options for you to choose from. We offer 2 and 3 axis systems from multiple vendors, lets discuss the features and DRO that will best fit your needs. Tooling; there are many tooling options that you may choose from, we can provide professional advice that will enhance the performance of your new Mill or you can see the tooling options on out tooling page. All of the option details are listed on our tooling page and full quotations. Call us and Request one today!
Check out our Easy payment plans in our Easy finance program.
Our leasing people can teach you why Leasing could be a great purchase plan for you, get information on Tax advantages.
Machinery Leases – When you make your last payment:
YOU OWN THE MACHINERY !
All Manual Knee Mill Purchase terms:
All Remedy Knee Mills are F.O.B. – Southampton, PA.
We will load your truck or trailer at No Charge daily or weekends by appointment.
Please note that pick up and or self-installation machinery terms are always prepaid, additionally you must have proper tie down materials for safe machine transportation.
Availability – Call for our latest stock list as it changes daily.
Shipping & Rigging – Remedy will provide you accurate pricing specifically for your machinery purchase and delivery details.
Pricing varies because of machine size and weights and your delivery requirements.
Payment– With Remedy Installation: 40% deposit with order, Balance due Net 10 days from completed installation. With customer pick up and/or customer installation, the machine must be prepaid.
Installation- Remedy can do the installation of the machine for you. We will gladly get the machine placed with you or the rigger, and finish getting the machine running at your facility. We will test all features and review the operation of the machine with your personal at that time.
Taxes – Federal are included, any/all state or local taxes are the responsibility of the purchaser. Some states and/or counties have local tax’s. We cannot know about all local tax’s or to be liable for these.
Training – Most manual K-Mills do not require training. If training is needed we will work with you to create a customized package, specifically to fit your needs.
Warranty – 12 Months limited warranty for any defects in material or workmanship of the machine tool and all factory installed items.
Validity – Remedy Price sheet prices were current 1-1-21. Current Prices and specifications are corrected in our quotations and we will provide you a firm quotation upon request. All specifications are copied from factory literature and they are deemed correct. We do not export any Machinery
* WE RESERVE THE RIGHT TO CHANGE DESIGN, COLOR, SPECIFICATIONS, OR PRICE WITHOUT NOTICE *
* All pricing is valid 1-2021 please refer to our quotations for all updates to specifications and pricing. *